Is there any way to make one cell on a separate sheet appear EXACTLY the same, including formatting and values?
As in this for example:
Pieces of Paper (Blue)
I would like to keep the formatting for (Blue) , color and bold, but I have not figured out how to do this.
I am trying to create conditional formatting to ascertain whether values in one table (Table 1) are different from another identically formatted table above it (Table 2) (so each cell in Table 1 has a corresponding cell in Table 2).
If the value in a cell in Table 1 is different from its corresponding cell in Table 2, the cell should highlight in red.
Every cell's corresponding cell is the same distance away.
I tried to put in a conditional formatting for C5 (C5 being the first cell in Table 2), which works, but this breaks and turns to #REF every time i save and re-open the document.
how to create a conditional formatting formula that looks like this..
"If A1 is equal to DATA highlights greater than zero on cells A2 to A1000.
I tried using the following in Cond Formatting:
When the Cell in F10 does not equal w/a, I want the text to be BOLD. I tried this and it didn't work...
=$F10w/a
also tried
=$F10"w/a"
Neither worked.
This seems way too simple to do yet I can't get it right. It will highlight some that are different and not highlight others that are different. I need to compare column A to O and highlight differences, B to P and highlight difference, and so on.
View 2 Replies View Relatedi'm trying to create a markscheme progress sheet.
You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.
I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.
I've tried as many combinations as my little amount of excel knowledge can cope with.
This seems simple...
If I let A1=8
If I fill in the cell green, either manually or with conditional formatting, and then copy and paste the cell into A2, A2 is now green with the number 8 inside.
However, if in A2 I type "=A1", A2 still has the 8 but is no longer green.
Is there a way to copy the formatting of a cell by setting it equal to the original?
I have 3 rows with numbers across several columns, each cell holding one number only. For example:
R1: 1101 - 1102 - 1103 - 1104 - etc.
R2: 2101 - 2102 - 2103 - 2104 - etc.
R3: 3101 - 3102 - 3103 - 3104 - etc.
A little further down I am having a list where the end user will write down the exact same number. Once the same number has been written into the list, I would like the number shown in the top rows (row 1 to 3) to be highlighted in green, basically telling the user that the number has been entered into the list below and is ok now.
How can I manage this via conditional formatting?
I am using Excel 2007, and here is my scenario. I have a spreadsheet with a different sheet for each month of the year. I want certain cells in a month's sheet to mirror or be equal to the same cell in the previous sheet so that if I change the value of a cell in April, the same cell will automatically be changed in May.
An example is that I have a cell with the value of "Comcast". If I want to change that value in April to "Directv", I want it to automatically change in May, too.
Now I know that I can individually program a cell to be equal to a cell in another sheet and it will do exactly what I want. The problem is that I have about 60 cells in each sheet that I want to mirror the same cells in the previous sheet, and I don't want the entire sheet to mirror the previous one. So with 11 months/sheets with cells mirroring the previous sheet, individually programming 660 cells and switching between sheets to do that would take a very long time.
So my question is this. Is there any way to select multiple cells and have them all mirror the same cells on a different sheet without my having to program each cell individually?
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
Say I have data in one tab that is cells
A9, B9, C9, D9, etc.
On the next tab, I want the cell in D5 to equal A9, D6 to equal B9, D7 to C9, etc.
I can't seem to lock the cell correctly to do this. If I use =A$9 in cell D5 and then copy down in cell D6 I'll get A$9 also, but if I use $A9, in D6 I'll get $A10.
I am confusing of using the equal function in vba, I need to have some cells between sheet1 and sheet to be equal but i cannot just put = sign in the sheet as it may be deleted. Can I have it as VBA code? how to do that and where to put this code, in what event?
View 3 Replies View RelatedI have a spreadsheet with Golf Stats on it, and on my latest import, the lookup stopped working. I am no longer able to look up any of the golfers names.I have attached a portion of the spreadsheet as an example.Lookup Failure.xlsx
Before the data was pulled in 'last name','first name' but is now 'first','last'... so that explains why I have the lookup column in Column A, because it used to convert the last,first format to first,last but that is besides the point. What my real problem is not being able to lookup Column D. As you can see in Cell L4, I tried to test if K4=D4 (Both say Nicolas Colsaerts but Excel does not say they are equal).
I am trying to hide rows if cetain cells in that row equal zero using a button on the page. Each cell has lookup formulas that will return a value. If coulmn B,F & I have a value of zero I want to hide the row. As of right now I am using the following code but I keep getting the following error message runtime error '13': type mismatch
View 4 Replies View RelatedColumns L, M and N are always fully populated.
Columns D, E and F may have some missing values, along with H, I and J.
Lets just concentrate on D.
I need to create a formula where I get the anser in C1 This is an average of L only where D has a value.
Can you make a TextBox equal the value of two Cells without first summing the two cells in the workbook?
TextBox1.value = Range.("B1").Value + Range("B2").Value ???
How can I select all rows where certain cells are equal to zero?
(i.e. in Column A
1 Bob
2 Joe
3 Smith
4 0
5 0
6 0
I want to select rows 4, 5 & 6.
I've used Go To>Special:Errors to write a macro to hide all rows with errors, but I also want to hide all rows that have zero values
I have a date on one sheet, and what I thought was the same exact date on another sheet. I want to vlookup off the date, however the values aren't the same. i.e. when I check to see if they = I get a false. They're both formated the same, custom date m/d/yyyy h:mm, and when I ran the check to see if one was text (t=(A1)) I get confirmation that they are both non-text!
View 9 Replies View RelatedI have a macro to insert a row and I would like it to be triggered by conditions in a IF statement or whatever is best? Macro has a ctrl+shortcut.
eg =IFa10=a12
do nothing
or run macro
I have 2 text cells (A1, B1) that appear to be the same, however, when I typed the formula "=if(A1=B1,"Yes","No)" in cell C1 the result is NO! (see attachment)
View 4 Replies View RelatedI wish to be able to add adjacent cells as follows, assuming I have a number in a1. (in B1) =a1-4.
If the answer is zero I would like to change it to -4 and then continue the process for more cells to read 16 ; 12 ; 8 ; 4 ; -4 ; -8 ; -16 etc.
I need to compare the data in three fields and if the same ignore but if different then add them with a space and a hyphen.
I use this formula for 2 fields and it works great I just can't get it to work with three.
=IF(TRIM(Data!BC2)=TRIM(Data!AY2),TRIM(Data!BC2),TRIM(Data!BC2)&" - "&TRIM(Data!AY2))
I use the trim command as the users entering data often add unnecessary spaces etc. and it combines the data even when the same.
I'm trying to do a SUM array to count the number of instances where Column C AND Column D are equal to 0, but are NOT BLANK.
I tried the formula:
=SUM((C:C="0")*(D:D="0"))
But the answer comes up 0. However, if I use the formula:
=SUM((C:C=0)*(D:D=0))
The answer includes blank cells (as I assumed it would).
How do I get a SUM array to count only numerical zeros?
PS: If there's a much easier way to do this, I welcome those comments as well, though if it can be done in SUM array I'd love that answer as well.
Columns E and F can have a 1 or a Zero
If e2, d3, e4 = all 0's or all 1's, count = 3 in col F
If either e2, d3 or e4 is not equal the count is 2 in F
Example
D E F
0
0
0 3
0 1 2
1 1 2
1 1 3
Also, why would this formula work with numbers but not letters?
=IF(B2="x",0,IF(C2="x",1,""))
In the range A1:Y66, for every cell whose formula returns a 0, I want it to delete that cell and shift the cells up.
Here is the code I tried, but nothing happened:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column > 25 Then Exit Sub
If Target.Rows > 66 Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
If Target.Value = 0 Then Target.Delete Shift:=xlUp
End Sub
Is there a formula or macro that will identify which cells on a spreadsheet containing various dollar values will add up to a predetermined total? I work in Accounts Receivable and sometimes vendors send in payments for several invoices with no instructions as to the application. I want to be able list the available invoice amounts on a spreadsheet, and be able to tell which of the cells add up to the payment amount.
View 2 Replies View RelatedI have three columns: Symbol, Dividend Payment, and Shares.
What formula will look at the shares column and symbol column and say if cells in column C are equal each other & cells in Column A are equal to each other than add all the div payment that correspond with those symbols and shares?
A
B
C
D
1
Symbol
Dividend Payment
Shares
Sum (Formula would go here)
2
SEB
.75
23
3
SEB
.75
23
(result desired) 1.5 (B2+B3) because (add the dividend where their symbol (A2&A3)and shares (C2&C3)are equal) both conditions have to apply to add div payment
[Code] ......
Is there a way to set 2 cells equal, while allowing either one to be manually changed? So if I put in value of 10 for Cell1, Cell1 and and Cell2 will both be equal to 10. Then if I change Cell2 to a value of 20, both cells will be equal to 20.
View 5 Replies View RelatedI'm trying to create a formula where I can compare two cells but accept them as equal is one is plus/minus 0.1.
Example:
Cell A1 is 3, Cell A2 is 3.2, I want Cell A3 to turn red (or report "1")
Cell A1 is 3, Cell A2 is 3.1, I want Cell A3 to turn green (or report "0")
What I'm trying to do is have a row one sheet of a workbook equal a column in another sheet. So ideally it would look like:
Sheet1!A1=Sheet2!A1
Sheet1!B1=Sheet2!A2
Sheet1!C1=Sheet2!A3
But what's happening is it seems like the destination cell keeps moving forward. So when I paste I get:
Sheet1!A1=Sheet2!A1
Sheet1!B1=Sheet2!B1
Sheet1!C1=Sheet2!C1
I've tried adding $ to no avail.