Error 449: Argument Not Optional Calling UserForm
Dec 5, 2007
I call a userform from a sub menu i created it, but i got an error 449: Argument not optional.
Private Sub Workbook_Open()
Dim cControl As CommandBarPopup
On Error Resume Next 'Just in case
'*Delete existing Super Menu if it was left.
Application. CommandBars.FindControl(Tag:="MyMainMenuTag").Delete
On Error Goto 0
On Error Goto u
'*Add new Accounting Menu
Set cControl = Application.CommandBars("Worksheet Menu Bar").Controls.Add(msoControlPopup, 1, , , True)
With cControl...........................
View 7 Replies
ADVERTISEMENT
Jan 20, 2007
I am trying to compute correlations using Correl function available in Excel. Get "Argument Not Optional" Error. Cannot understand what I am doing wrong.
Sub test()
With Worksheets("Corr")
Range("H1").Value = WorksheetFunction.Correl(Range("A1:A252, B1:B252"))
End With
End Sub
View 4 Replies
View Related
Aug 24, 2007
I have recorded a simple macro ( copying a cell, and then pasting the formula into various others), and I get the following error
Compile Error: Argument Not Optional
I have highlighted where the error first happens
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 24/08/2007 by Michael Traynor
'
'
Range("K7:K8").Select
Selection.Copy
Range("K167:AJ168").Select
Range("AJ167").Activate
Range("K167:AJ168,K175:AJ176").Select
Range("AJ175").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184").Select
Range("AJ183").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184,K191:AJ192").Select
As I've said I didn't write this, it was recorded from Excel.
View 7 Replies
View Related
Jan 16, 2007
I am getting a run time error # 9 when I run a macro that calls a Userform or when I try to run code in a Userform module. The code performs beautifully on my computer, but it did not work on a coworker's computer. It ended up working on 3 out of the 5 computers I have tried it on.
I have tried changing security settings to low, and a bunch of other stuff, but I cannot get the code to run on the computers that get the run time error on them when I try running the code on them.
I get the run time error when I try to load or show any userform in the workbook and I get it if I try to run code that is in the userform module. However, if I paste the code into a regular module and run it, the code runs fine.
Does anyone know what could be causing this? I don't think my code is causing the problem since it runs on some machines, I am guessing there is a setting that is preventing Excel from calling Userforms.
I have a button, Private Sub CommandButton1_Click, on a sheet that shows a userform. This is the bit of code that gets tagged with the run time error. The userform has a refedit control on it allows the user to select a cell and then hit ok to run the code or cancel to, well, cancel it.
Code for the button that gets tagged with the run time error:
Private Sub CommandButton1_Click()
frmLoadTrade.Show 'calls userform
End Sub
Code in the Userform Module:
Private Sub cmdCancel_Click()
TradeTicketSpreadsheetName = ThisWorkbook.Name
Unload Me
Workbooks(TradeTicketSpreadsheetName).Activate
End Sub
View 4 Replies
View Related
Feb 26, 2014
I don't why, but the compiler keeps screaming about this macro when I call it from a button. It used to work, and I'm not sure what changed. Why is an argument required simply because I'm using a button now?
See the picture. debugerror.jpg
The Sub MainFormattingMacro() line is highlighted if I hit Debug.
View 3 Replies
View Related
Feb 5, 2008
I get a "Run-time error '9': subscript out of range" error when calling a userform.
The code opens a reference spreadsheet then shows a userform with a combobox and two command buttons (Continue and Quit). The userform has a private initialization sub-routine to populate the combobox with values from a list on the reference spreadsheet. When the userform is called the error comes up.
Here's my problem: The code was written on my computer and saved as an Add-in. The add-in has since been installed on a number of other computers and works properly. Recently I tried to run the code and this error started popping up, don't know what changed. All versions of Excel are the same and haven't changed.
BRF = ActiveWorkbook.Name
If BRF = "Blank upload.xls" Then
Workbooks.Open path & "QC Data AnalysisQCDA ref.XLS"
OtherBRF.Show
Workbooks("QCDA ref").Close SaveChanges:=False
Goto 1
End If
View 5 Replies
View Related
Apr 26, 2006
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
View 2 Replies
View Related
Jul 31, 2014
I have some code I wrote that copies sheets from another sheet in another workbook to my current one, in order. However, depending on activity within these sheets, there might not be a sheet for the month.
I have the on error code to go to the next argument, however I would like it to tell me on my errors sheet that it did not exist.
The error sheet will simply have 2 columns of copied sheets and non-existent sheet.
VB:
On Error Resume Next
Workbooks("GLTemp").Sheets("981715").Copy After:=Workbooks("MHSGMR").Sheets("981715 Budget")
Workbooks("MHSGMR").Sheets("981715").Activate
sheetName = ActiveSheet.Name
Workbooks("MHSGMR").Sheets("981715").Select
ActiveSheet.Name = sheetName & " GL"
[Code] ......
View 3 Replies
View Related
Feb 4, 2014
I have got a UserForm which pulls data from Excel sheet and show it on UserForm.
UserForm1 has One ListBox name "ListBox1" and Thirteen TextBox's.
TextBoxBatch...... Showing Batch number
TextBox1 ........... Showing Year 1 data
TextBox2.............Showing Year 2 data
TextBox3...............Showing Year 3 data
.
.
.
.
TextBox12...........Showing Year 12 data
It shows data correctly in UserForm1 for TextBoxBatch and TextBox1 to TextBox9 but when it reaches TextBox10 it give error "Could not get Column property, Invalid argument"
And it does not show data in TextBox10 (Year 10), TextBox11 (Year 11), and TextBox12 (Year 12).
I have attached workbook and userform.
Book1.xlsm
View 4 Replies
View Related
Aug 13, 2007
Hi, i'm having a terrible problem (at least for me).
I want to use a var from a UserForm to use it in calculation method in a Module.
How can i refer to that variable in the Userform in the Module code?
View 11 Replies
View Related
Nov 17, 2013
I met problem in calling into a subroutine. It is error 424. I have dim all variable. However I still get it.
Code:
Sub UpdateAll()
'
' UpdateAll Macro
[Code]....
I got the error when I pressed F8 to step into the getOneRecord() function, which is highlighted in red.
View 2 Replies
View Related
Nov 28, 2008
I've written an Excel (using 2007, compatibility mode to 2003) app for our stock control. Basically it's a protected stock sheet which the user adds/removes stock via a form.
When the user runs the form the following code loops through the stock list header adding item names to a combo box. Problem is I get a run-time error if there's more than 60+ items but while the error always occurs, it happens at different places in additems.
Run-time error '-2147024809 (80070057)
Invalid argument.
In the code I've allowed a loop to 1000 items but in reality they'll be no more than 150.
View 11 Replies
View Related
Jun 24, 2014
Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row
[Code] .........
View 2 Replies
View Related
Nov 21, 2009
I can't find anything direct via the web and here so I will ask what will hopefully be an easy question.
I have a form called FIELD_MX and on this form I have a Command Button called Enter ONT Demand Requirements.
When I click the Enter ONT Demand Requirements, I want to display a form called ONT_Demand_Requirements.
I know the UserForm needs to be initialized, but where should it be or am I wrong?
View 9 Replies
View Related
Aug 25, 2009
I need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.
View 4 Replies
View Related
Feb 3, 2009
This Thread describes a function that I've found incredibly useful to reset the "last used cell" in a worksheet. I use this function a lot, and I would like to make a macro out of it. I have a menu-item added in my excel that runs the macro;
View 3 Replies
View Related
Dec 19, 2006
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
View 7 Replies
View Related
May 13, 2009
Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.
Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.
View 2 Replies
View Related
May 9, 2008
have a look at this and tell me why i cant even give it a trail run without getting an error
[url]
View 13 Replies
View Related
May 11, 2009
I keep getting an Run-time error '424': Object required error whenever I try to run a macro with a rather involved user form. I know the code for the form is what is keeping it from running properly. Here is the code for the form:
View 6 Replies
View Related
Sep 2, 2009
I have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
View 3 Replies
View Related
Oct 20, 2011
I have an application using two userforms. Following sequence is used:
1. Open Userform1 (with uf.show)
2. click on a commandbutton in userform1 opens a second userform on top of userform1.
3. Close userform2 with commandbutton on userform2 (userform2.hide)
(I did not want the user to close the UF via the "X" )
Runtime error 402 : Must close or hide topmost modal form first
So, I changed my code so when the user clicks the commandbutton in userform2
userform1.hide (which is the topmost)
userform2.hide
But again I get the same error.
View 7 Replies
View Related
Aug 5, 2008
I created a UserForm (userform1) and added a label to it which essentially just says: "Pick a Colour"...
The other UF controls are added on the fly using the below code...however when I try to add the event to each button I get the Automation Error but I don't really understand how / why... the events are actually added to the VB project ok...
Private Sub UserForm_Initialize()
Dim NewButton As MSForms.CommandButton
Dim ws_i, line As Integer
Dim clr_str As String
For Each ws In ActiveWorkbook.Worksheets
I added a dummy routine for test purposes which is to be invoked on click of UF button control (I have tried placing this code in a standard module, within UF module etc to no avail):
Sub HIDE_WS(clr_id As Long)
MsgBox clr_id
End Sub
So to reiterate -- when I invoke the initialisation of the UF I get the following error:
Automation Error
The object invoked has disonnected from its clients
All events are added for each control.
If I remove the adding of the events I know the UF populates with the correct controls etc...
View 9 Replies
View Related
Jan 20, 2010
When I click on the userform that opens when the workbook does I get this error:
Run-time error '13':
Type Mismatch
This is the code highlighted
DT=UserForm1.TextBox3.Text
View 9 Replies
View Related
Feb 17, 2010
The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,
Private Sub UserForm_Initialize()
'Get Last Entry
Dim countnonblank As Integer, myRange As Range
Dim SDate As Date, SDateRange As String, EDate As Date
Dim SDateString As String, EDateString As String, DirString As String
'count cells with data in them
Set myRange = Sheets("textfilemerger").Range("A:A")
countnonblank = Application.WorksheetFunction.CountA(myRange)
'decide if data is present or not
If countnonblank = 1 Then.............................
View 9 Replies
View Related
Jul 4, 2006
I am populating a UserForm from some ranges on my workbook. All is well EXCEPT for the third guy down- "lstCheckDep". The only difference I can figure out is that the cell it is drawing from has a date format. How can I adjust for this so that it's contents can go on the UserForm, without getting hung up on the formatting?
Private Sub UserForm_Initialize()
lblCandidate.Caption = Range("Rcandnam").Value & " - #" & Range("ID").Value
lstCheckCntry = Range("RCountry").Value
lstCheckDep = Range("RDeparture").Value
lstCheckTrack = Range("rTrack").Value
lstCheckLang = Range("Lang").Value
End Sub
View 4 Replies
View Related
Feb 20, 2008
I've created a userform on one computer which launchs when I open the excel workbook. The userform contains comboboxs and a picture. But when i saved it on another computer and tried to open it and it errors. (Run-Time error 9). (Still works fine on the computer that created it). All references are to this workbook only. Userform is contained within the Forms folder of this workbook(not personal.xls) and the userform name is PDM_SPLASH1. Also, if i go into VBA I can see the form, but it wont launch when i try to play in manually. (Run-Time error 9)
Private Sub Workbook_Open()
Worksheets("Launch Page").Select
Worksheets("Instructions").Visible = False
Worksheets("SelectDB2").Visible = False
Worksheets("REPALIGNMENT").Visible = False
Worksheets("PDM").Visible = False
Worksheets("TABLES").Visible = False
Worksheets("DISPENSING").Visible = False
Worksheets("DISPENSED").Visible = False
Worksheets("OpportunityAnalysis").Visible = False
Worksheets("ENGINE1").Visible = False
Worksheets("POTENTIALCONTRACTLOSS").Visible = False
PDM_SPLASH1.Show
End Sub
View 2 Replies
View Related
Jul 25, 2014
Ive created a userform that I want to have input data into specific cells in my worksheet. I have the userform created, and some of the other VB stuff written, but it is far from being functional. I have come across the first of what to is to be many problems (Im pretty rusty at VB).
I have a button on my spreadsheet that is supposed to show the userform using this macro
[Code] .....
When I click the button, it breaks at "Form1.Show" giving me "Run-time error 424 : Object Required".
View 7 Replies
View Related
Feb 17, 2012
I am experiencing a run time error with my command in a UserForm.
Run time error '9':
Subscript out of range.
Error occurs on the following row:
With Worksheets("Math Lineup").Range("D3")
Below is the code I am using:
PHP Code:
Private Sub CmdAddWrestler_Click()Dim RowCount As LongIf Me.txtWrestler.Value
= "" ThenMsgBox "Please enter a name", vbExclamation, "Wrestler Name"Me.txtWrestler.SetFocusEnd IfRange ("D4")
= txtWrestler.TextRowCount
= Worksheets("Match Lineup").Range("D3").CurrentRegion.Rows.CountWith Worksheets("Math Lineup").Range("D3")
.Offset(RowCount, 0) = Me.txtWrestler.Value End With txtWrestler = "" End Sub
View 2 Replies
View Related
Jul 15, 2013
I am creating a UserForm to get macro running options from the user. The Workbook__Open calls the macro which shows the UserForm right after the variables are defined. Is there a way to avoid the compile error?
07.15.2013-14.15.54 - Bermex's library
View 1 Replies
View Related
