I need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.
View 4 Replies
I am trying to compute correlations using Correl function available in Excel. Get "Argument Not Optional" Error. Cannot understand what I am doing wrong.
Sub test()
With Worksheets("Corr")
Range("H1").Value = WorksheetFunction.Correl(Range("A1:A252, B1:B252"))
End With
End Sub
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
I call a userform from a sub menu i created it, but i got an error 449: Argument not optional.
Private Sub Workbook_Open()
Dim cControl As CommandBarPopup
On Error Resume Next 'Just in case
'*Delete existing Super Menu if it was left.
Application. CommandBars.FindControl(Tag:="MyMainMenuTag").Delete
On Error Goto 0
On Error Goto u
'*Add new Accounting Menu
Set cControl = Application.CommandBars("Worksheet Menu Bar").Controls.Add(msoControlPopup, 1, , , True)
With cControl...........................
I have recorded a simple macro ( copying a cell, and then pasting the formula into various others), and I get the following error
Compile Error: Argument Not Optional
I have highlighted where the error first happens
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 24/08/2007 by Michael Traynor
'
'
Range("K7:K8").Select
Selection.Copy
Range("K167:AJ168").Select
Range("AJ167").Activate
Range("K167:AJ168,K175:AJ176").Select
Range("AJ175").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184").Select
Range("AJ183").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184,K191:AJ192").Select
As I've said I didn't write this, it was recorded from Excel.
I'm trying to test whether a variable, a range in this case, has already been defined. If not I want to Set it to a specific cell.
I tried:
If rng Is Nothing Then
Set rng = Range("B14")
Else
rng = rng
End If
I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
I d like to test for the existence of text in range D5 to D10000 for example
I may have this 49000897890VGN21SP. VGN21SP is text so I d like to spot it
it may also exist on its own VGN21SP can you suggest me with a macro?
like this one
Sub DeleteNAs()
Dim C As Range
For Each C In ActiveCell.CurrentRegion
If C.Text = "#N/A" Then C.ClearContents
Next C
End Sub
Is there a way to check if a named range exists before I run a piece of code? I created a new file that has need for all the old file's ranges plus a couple more, and I want to use the same macro for both. So on the first file I just want to say, if these other named ranges are there, go ahead and do his other thing.
View 6 Replies View RelatedI have a range of data that contains can contain either a pass or fail. what I require at the bottom of this range is a formula that says 'if any one of the range = fail then "test fail", else "test pass"'
View 2 Replies View RelatedI need to do stats for each month within a set of data. Ie take the min for all data in the month of Jan only and repeat for all other months etc. Is there some way I can set up a Min function to only consider the data belonging to jan for example and have it change and only consider Feb, then march.. etc Seems like it would be easy to just do this manually but there is a large timeframe over which data was collected so would take forever.
Have attached sample of data. rainfall.xlsx
I want to randomize a range of values stored in sheet 1 and insert them in another cell.
I am having values for sales consisting of product names and its price. there are 10 product names and its corresponding prices and is stored in cells E1:F10. I want to generate test data containing product names and its corresponding price. The generated data needs to be saved in the cells A1:B50
the product names needs to be randomized. This needs to be done in vba. Below is the screenshot of the final result that is needed. As you can see, I have randomized my 10 products and its prices into the test data column. This was done using vlookup formula and I need the same to be done in vba.
How do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.
View 6 Replies View RelatedOn Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.
Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.
I am trying to test for the next available row in a sheet using a range as follows:
NextRow = Range(MyRange).End(xlDown).Row + 1
If there are no rows being populated, the formula throws an error and I assign NextRow to 0 indicating no entries present
However, and this is my question, if there is one row populated the value for next row seems to either give 0 or 65637.
After this, the code runs OK.
How do I test if a cell has #N/A?
View 4 Replies View RelatedFrom a large worksheet I'm trying to find out if a particular value is used in that formula. E.g. formula: (In cell C1)=A1+B1*.75
I want to check if .75 is used in the formula (which is 75%) There are 1000's of record would it be possible to check the entire column C
I am using the IsDate() and IsNumeric functions in my VBA code. Is there an equivalent function for testing if a value is an integer?
View 5 Replies View RelatedI'm having an intelligence lapse and I need help with a formula
Simply need to return a "1" if value in Cell X is equal to or greater than -(minus)4% and a "0" if value is less than -(minus)4%.
I have a 32 question test that I expect everyone to get most (if not all the answers correct. I have a cell that is counting the number of correct answers.
What I want to do is start a timer when the first correct answer is put in and stop when the last answer is put in. So essentially, I need a way of looking at a cell and starting a timer when it equals one and stopping when it hits 32.
How i can test to see if the autofilter, while enabled, is not currently filtering?
how to perform Cochran's Test in Excel?
I know it's probably available somewhere as an add-in, but we aren't allowed to install any, so we have to do it from scratch.
Basically, I'm have to set up a spreadsheet to look at "Between Laboratory Outlier Tests", and Cochran's test is one of them.
Also, how would I calculate the Cochran Critical Values for a given set of laboratories and replicates?
I am currently working on code that uses either arrays or ranges. I often resize local array based on the dimensions of the input. However, I am running into trouble because arrays use ubound for dimensions, but ranges use ether rows.count/columns.count or ubound on value2. How can I determine whether a variable is an array or a range. the IsArray function happily passes a range variable, so that doesn't work.
View 2 Replies View RelatedI have a defined range Picku_time and this function fails
=isdate(range("Pickup_time"))
it gives the =#Name?
I am using the formula below to return a blank cell if either logical test returns true but apparently the OR operator returns a #VALUE error when applied to a non numeric value in a cell - in this case cell E40. =IF(OR(E40="N",P40=""),"", SUM(P40,S40,V40,Y40,AB40,AE4))+F40. My goal is to return a blank cell if E40 contains the letter N or P40 is blank, otherwise perform SUM(P40,S40,V40,Y40,AB40,AE4))+F40.
View 4 Replies View RelatedI have a resolution calculator that I am working on.
You put your original resolution in say 1440x1080
then below you put in any one of the new target resolutions.
Place 720 in the height and you get a message that says
"960 is your new matching Width resolution"
Id like to follow up on that with an if statment that test to see if the cell is blank if it is then null, if not then test 960 in this case to see if 960/16 = a non decimal number.
So in the cell to the right of that sentence it would return the result
"and 960 is 16 pixel safe" something like that.
I can probably figure out how I will handled the cell arrangement, numbers, and text I just for now need to find a way to do a test on whole numbers and return a text value (my guess is an if statement)
Under what conditions does a simple logical test, like
View 5 Replies View Related
