How to autofill "1" on the other worksheet, the situation as follow,
Sheet 1 is data input sheet.
Name
Start date
End Date
Ann
2-1-2013
5-1-2013
Billy
7-1-2013
9-1-2013
[Code] ..........
Sheet 2 is the Calendar and the autofill result should be like this.
Date
Ann
Billy
1/1/2013
[Code] .........
I have an xls with over 500 rows of data, every day I have to update the contents of some of the cells, Cell A contains the date and is auto filled already to the end of 2009, Cell B shows me the number of days since I began the sheet and is also auto filled already to the end of 2009, Cell C & Cell D I have to manually enter data
Cell E contains this formula =D527-D526
Cell F =C527/B526
Cell G = =IF(C527=0,0,C527-C526)
Cell H resorts to manual entry.
My question is "why do these columns with formulas, (E,F & G) not automatically carry the formula to the next row?" I'm sure that they once did. Is it a setting that I can't find?
This is excel 2007.
I'm working on a decision matrix to evaluate different alternative production methods. Before that criteria have to be choosen and weighted against each other. The user would fill out the yellow/ blue cells with (0=less important; 1=equally; 2=more). Then values are added up and put into some kind of ranking.
The example was done by hand, which costs a lot of concentration. I would now like to extend the matrix - do you know how to fill out the grey cells more efficiently?
(Excel 2007, Win7)
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View Relatedhow to add many columns to the rightmost part of the worksheet carrying on from Col AA?
I keep getting error 'Cannot shift objects off sheet.' and followed instructions to change a setting to All or use control-6 but this made no difference.
How can I unprotect MS excel 2007 sheet. I have forgotten the password.
View 1 Replies View RelatedI know how to protect a worksheet with a password so that no one can amend the contents or view the formulas in the cells. And then we can un-protect the worksheet by clicking on the "review" tab in excel 2007 and so on. But recently I came across an excel sheet which was password protected and my query is that the "Review" tab was greyed out. What kind of protection was this that clicking on "review" tab option is also unavailable. And how does these kind of sheets get unlocked then.
View 2 Replies View RelatedI'm fairly new to Excel (2007).
I have used a simple COUNTIF formula (=COUNTIF(C7:C207,"Name")) on sheet 1 to give me the total I want.
What I now want to do, is display this total on a different sheet in the same workbook (Sheet 3) without having to take all the data from Sheet 1 over to Sheet 3.
It is possible to lock the Author of the Worksheet in File --> Properties --> Summary Tab..?
I am using Excel 2003 & 2007..
I am working on a sheet that will copy a specified number of sheets, rename them, set a cell within the equal to a cell from another sheet and (the problem) set cells on my input sheet equal to cells in the newly copied and renamed sheets.
I want the cells in sheet "Data Input" to look something like "='newsheet'E26"
I can make it return the actual number in the cell and return the formula in the cell, but not make the cell in "Data Input" reference the cell in the new book.
Here is what I have:
Code:
Sub CopySheetsTest()
Dim i As Integer
Dim wks As Worksheet
[Code]....
Excel 2007. Is there a way to extract information from cells and rows that constantly move? These rows need to be able to cut & paste, copy & Paste, insert and delete. I have the formula I need to display the data, but with the cutting and pasting etc, my formulas get all messed up.
I have the excel sheet on Google docs. It displays some cells wrong because it does not recognize certain formulas.
[URL]
On the second worksheet, I want the information from columns A, H, M, N, and O to be extracted at a certain time each evening and sent to a worksheet, without sending duplicates. These rows will constantly move which is why my current setup, which is just to display the information, will not work... We decided to try to extract it into a different worksheet or workbook if possible.
How do I insert an animated gif into a worksheet in excel 2007?
View 8 Replies View RelatedI am using Excel 2007 on Windows Vista Business 32 bit. I have several workbooks. Each one contains 33 worksheets. 31 of the worksheets are for each day of the month, the other two are for yearly totals and revision history. Recently, a menu bar has appeared at the bottom of my worksheet. At the left is an icon that states that no macros are being recorded, click here to start recording. The center of the bar is blank, but placing the mouse over the bar brings up a customization menu.
At the right side of the bar are three icons dealing with page layout. As I scroll down the worksheet entering data for the day, the cursor goes below the bar and the screen does not move up as it used to do. Also, by using the arrows keys to scroll down, I do not see the bar containing the worksheet names. Luckily, I have a macro that allows me to save the current days worksheet and move to the next one, otherwise I would not be able to do that. When I open a previous month, the bar is there also, so it must be a flag that I can't find or don't know about. Is there a way to get things back to normal?
How to Lock Individual Cells in a Worksheet excel 2007 .... i.e.
A2:A8
I want this selected area locked with password.
Here is my situation:
I created one worksheet called: Assumptions. In this worksheet I have 6 different columns representing 6 different cases.
I have completed the first case in a different worksheet called: WL. I would like to copy this case/worksheet WL and be able to change all the reference cells used in case#1: WL to case#2: FA. So all the cells used in my Assumptions worksheet were in the B columns for case 1: WL, for case 2: FA they will all be in the C column, same row, different column.
Any quick way to do the changes?
My case #1 worksheet as over 10 000 formulas, I really don't want to change each and every formula.
I was thinking there was a way to highlight ALL the reference cells used in my Assumption worksheet, so I would have had to drag from B to C cells, only 50 cells. But I can't find it.
I am creating a login system for two users on a excel worksheet. I have the two users on a drop-down list, Maria and Andrew, which then requires a password entry. This is linked onto a data validation to make sure that the password matches the data table.
After, I then click on a macro, which, when successful, takes me from sheet 1 to sheet 2.
My problem is that I need to have it so that Maria is taken from Sheet 1 to Sheet 2, and Andrew from Sheet 1 to Sheet 3.
Intention is to (automatically) fully protect each completed worksheet/workbook on "save"/"save as" in MS Excel 2007... Is this possible by means of a macro? Which one? Saving in a ".xlsm" format is required?
View 9 Replies View RelatedUsing Excel 2007, I'm trying to figure out (and not succeeding!) on how to declare worksheet and range - in order to:
input a formula to cell xfd1, then copy down to xfd2:xfd100 - and here's what I've been playing about with
Code:
Sub filldownxfd()
Dim src As Range, out As Range, wks As Worksheet
Dim sRangeName As String
Workbooks.Item(1).Sheets.Item ("Sheet1")
Dim example As Range
Set example = Range("xfd2:xfd100")
[code]....
Everytime I save my workbook, I get a dialog box that says:
"A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a vlid path, workbook, range name, and cell reference."
First off, it say's "this" worksheet no matter what worksheet is active.
Usually the culprit is a screwed up name that has a #REF in it somewhere. Not this time. All of the formulas appear to be working fine.
Is there an audit feature that will find the errors for me? (Excel 2007)
I am using Excel 2007 in Windows XP. I am trying to change the worksheet referenced in a formula from the label of the worksheet to the index of the sheet. I want to use this macro in multiple workbooks, and the relevant sheets have different names but are all in the same position.
I used "record macro" to get the structure of my code. It gave me the line:
ActiveCell.FormulaR1C1 = "=SUM('8Nov11'!R[13]C[-4]:R[108]C[-4])"
I want to change that '8Nov11' to the 3rd worksheet from the left, so something like:
ActiveCell.FormulaR1C1 = "=SUM(ThisWorkbook.Sheets(3)!R[13]C[-4]:R[108]C[-4])"
I can't get this to work, and I can't find the syntax for this anywhere. I've tried with and without quotes, exclamation points, changing to A1 notation and using "Range," "Sheets," "Worksheets," "Item(3)", and many other combinations, but haven't gotten it right.
Most of the errors I get are "Runtime Error 1004: Application-defined or object-defined error."
I wish to monitor a change in a certain columns at some worksheets. I have - after having consulted John Walkenbach' fantastic book Excel 2007 Power programming with VBA - understood how I do to monitor a change in specific worksheet, by using the Intersect-function in the change-event on that particular worksheet. That works fine.
My situation is that I have an application that I start out with a certain number of workheets in a workbook, and in the course of the work that the application does, it now and then adds worksheets, and these worksheets I would like to monitor for change in a special column. I know, by looking at the names of the worksheets which ones of those in the collection that I want to check.
I therefore used, not the Worksheet_Change event but the Workbook_SheetChange. It doesn't work quite well. I guess my question for now would be:
The call to this event looks like this:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
1) How - in what way - should I use the first argument, the "Sh as Object"? Can I/Should I give it a name?
The error message I get when I use an instruction like this:
If Not Intersect(Target, Range(M:M)) Is Nothing Then
'Do Stuff
end if
The method 'Intersect' in the object '_Global' failed
(M is the column that I want to check)
Ok I am using Excel 2007. I want to copy 4 cells from a row on sheet 1 to sheet 2 based on value in first cell in row. Example if cell a13 > 0 then copy row 13, cells b13 thru e13 only to first available row in sheet two but starting from row 12 on sheet two. Because sheet 2 has title information at the top from row 1-12.
I would rather not have to use a button to do it, would like it to do it as data is entered in sheet 1.
I am using Excel 2007 on Windows 7 Home Premium 64bit.
My Workbook contains 2 Worksheets, both with the same headings in row 1. Sheet2 is initially empty, except for the headings in row 1.
The following is a sample of the data in Sheet1:
[Code] ......
I want to create a Macro to operate as follows:
In the above sample data, rows 2, 4, and 8 are identical, so I want to copy rows 4 and 8 to Sheet2, and delete them from Sheet1.
Similarly:
Rows 3 and 9 are identical, so row 9 should move to Sheet2;
Rows 5 and 11 are identical, so row 11 should move to Sheet2.
Rows 6, 7, 10, and 12 are all unique, so should be unaffected by the Macro.
New records will be added to Sheet1 periodically, so the Macro will be used each time to move any newly discovered duplicates to Sheet2.
The Macro should make no assumption about how the rows are ordered, and should not change their order.
I have uploaded two Workbooks, such that Workbook1 shows the original data, and Workbook2 shows the result I want to obtain.
Attached Files :
Workbook1.xlsm
Workbook2.xlsm
I would like to know if it is possible with VBA in Excel 2007 to select objects based on size (or above a certain size).
I would like to select all the picture objects but not the small checkboxes on my worksheet.
I know that I can select the items one by one with home -> find/select -> select object but how I could make this "find/select" conditional.
i want to paste a worksheet with amended cell sizes and also some clipart pasted...to another workbook in same style(excel 2007). when i do that, it says 'data on clipboard may not be of same size.......' and paste in different size.
View 1 Replies View RelatedIs there a formula to count empty cells on a excel sheet?
View 4 Replies View RelatedWe are using Excel 2007.
I have a macro enabled spreadsheet and I need to save one sheet into a new file that is in xls format. I can do that --- is there anyway to suppress the Compatibility Checker box to make it that much easier?
The new file will not have macros as will just be a data in rows and columns so compatibility. Interesting is the compatibility checker box says there are links to the original spreadsheet, but I can't find them in the connections menu.
I'm trying to build a workbook (2007) with multiple worksheets where each worksheet corresponds to a different query/dataset pulling data from the one database.
I would have expected that you could define the one data connection object and then specify the SQL that each worksheet table will invoke. The apparent structure of having the query coupled to the connection object is confounding me. I'm therefore trying to set up a separate connection for each of the worksheets and Excel is getting tied up in knots.
I recently upgraded from Excel 2003 to 2007, and the worksheet change procedure that i have embedded in my worksheet no longer fires when the criteria are met. If and if I fix it to work in 2007, will it still work in 2003?
Here is my procedure:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngCell As Excel.Range
If Not Intersect(Target, Range("C19:R19")) Is Nothing Then
For Each rngCell In Intersect(Target, Range("C19:R19"))
If rngCell.Value = "BLACK" Then
MsgBox "Please select a shading style", , "Shading Style Required"
End If
Next rngCell
End If
End Sub