If I want to format a cell I go to that menu. Choose formatting number.
The default value will appear with 2 decimal digit.
I want to change it to 3. How can I do so?
Is it possible to change the DEFAULT values that Excel 2007 offers?
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I have excel 2007 and I came across the following difficulty:
If I create a graph (or a chart) the default size is "Letter". However, I can switch this "Letter" to "A4" which I need and then create a template. But I always have to manually choose this template for new charts. However switching this any time I create a new chart is a rather bad way to cope with. Even clicking on set as default obviously does not cause to have A4 size for new chart, it still has got size of Letter when adding a new chart.
I assume the solution could be in XLStart templates, but it probably doesnt work for charts that you add. Or at least I didnt find any clue on the internet for this problem.
how to change the default settings for shapes in Excel 2007? I select a line tool and it is a blue color and I would like to have its default as black
View 6 Replies View RelatedI want to set the default row height as 20.0 (not excel's standard 15.0). When I delete the contents in a cell that has Wrap Text property enabled, the row always reverts back to default height of 15.0 and this is too small. Is there a way to chnage the default?
View 6 Replies View RelatedUsing Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
I am working on a project where I am virtually almost finished except for a minor change with the pie chart. I am analyzing some data and recorded a macro to do this and also the pie chart for visualization. However, I do not like the color of the default pie chart colors and would like to customize it. How could I change this within the macro I have recorded?
[Code] .....
In the toolbar there's a section titled "Number" which allows you to change cell formats with selections named General, Number, Accounting, Date, Time, etc. I want to permanently change some of their default formats.
For instance, currently when I select Number the default is -4000.00. I want to PERMANENTLY change its default to (4,000.00). How do I do this?
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
User of Excel in Office 2007. However, I for statistics about how my Bitcoin Device's works and decrypts Bitcoins per day for trends and statistics, and so on
Now while I was away so had the power gone, and for almost 24 hours so stood all still, I would now like to outline in red the date / dates where I have zero or very low running time for specific date, but I can only change Fragen for all dates, not individual dates.
The stack's not exist in the data value is equal to zero (null) where by I want to be able to get the date in red color, and possibly also in bold. see print screen below.
[URL] .....
I am trying to find a way in Excel 2007 to convert the date from US format to UK format, I tried to change it by using [right click=>Format cell=>Select Date=>Select the first option in Type:*14-03-01=>OK], but I doesn't work , the attached file are presenting the date in US format.
View 10 Replies View RelatedIs there any way to change the settings in excel 2007, to give me the original color palate from 2003? I want to use the old colors because I don't like the new ones.
View 2 Replies View Relatedmacro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View RelatedUsing excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
View 1 Replies View RelatedIn Excel 2007 I know that if you have a cell containing text that you can change the color of parts of that text like This is the text in my cell and this is red text
But I have a cell with a formula that adds text to the end based on a conditional. I can't see any way to change the text color in this situation. I basically want this formula:
=D_Notes & TEXT(CHAR(10),) & IF(Terms = "Budgetary Estimate Only", "Quote is budgetary only and is subject to change pending final design.","")
Here is my situation:
I created one worksheet called: Assumptions. In this worksheet I have 6 different columns representing 6 different cases.
I have completed the first case in a different worksheet called: WL. I would like to copy this case/worksheet WL and be able to change all the reference cells used in case#1: WL to case#2: FA. So all the cells used in my Assumptions worksheet were in the B columns for case 1: WL, for case 2: FA they will all be in the C column, same row, different column.
Any quick way to do the changes?
My case #1 worksheet as over 10 000 formulas, I really don't want to change each and every formula.
I was thinking there was a way to highlight ALL the reference cells used in my Assumption worksheet, so I would have had to drag from B to C cells, only 50 cells. But I can't find it.
I've just switched to 2007 and can't seem to find where they've moved the ability to change the width of bars in a chart. Where is it in 2007?
View 7 Replies View RelatedSomeone Im working with says she used to change Excel to work on it on some vertical monitor. Is there a way to do that in Excel 2010 or even 2007?
Obviously I'm not talking about print layout, but viewing the whole application in portrait view, as if she turned a monitor sideways and altered the Aps view.
Ii have a UserForm with a ComboBox in it. the selections in the box are
0
5
10
15
20
25
30
I have 7 shapes in Worksheets("Interface") and renamed each shape caution1 through caution7
What i need is when i click on continue in my userform each shape will change according to the selection.
if 5 is selected all caution shapes will read, Caution flag is out 5 minute break
if 10 is selected all caution shapes will read, Caution flag is out 10 minute break
if 15 is selected all caution shapes will read, Caution flag is out 15 minute break
and so on
excel 2007 btw
I wish to monitor a change in a certain columns at some worksheets. I have - after having consulted John Walkenbach' fantastic book Excel 2007 Power programming with VBA - understood how I do to monitor a change in specific worksheet, by using the Intersect-function in the change-event on that particular worksheet. That works fine.
My situation is that I have an application that I start out with a certain number of workheets in a workbook, and in the course of the work that the application does, it now and then adds worksheets, and these worksheets I would like to monitor for change in a special column. I know, by looking at the names of the worksheets which ones of those in the collection that I want to check.
I therefore used, not the Worksheet_Change event but the Workbook_SheetChange. It doesn't work quite well. I guess my question for now would be:
The call to this event looks like this:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
1) How - in what way - should I use the first argument, the "Sh as Object"? Can I/Should I give it a name?
The error message I get when I use an instruction like this:
If Not Intersect(Target, Range(M:M)) Is Nothing Then
'Do Stuff
end if
The method 'Intersect' in the object '_Global' failed
(M is the column that I want to check)
I enter a date and time in a cell, e.g. "2013-10-07 12:30", and then I save the workbook.
When I open the Workbook again, the cell contents is "2013-10-07 00:00".
I am currently using Excel 2007. I haven't tested this explicitly with Excel 2013 which is my normal working version, but I think I should have noticed it if it had happened in 2013.
I have a macro that imports text file and puts a comma after each number (alphanumeric also). I have tried to change it to put single quote around the number and comm afterwards.
Text file listing
123
456
789
When I run my marco I get the following
123, 456, 789
which is what I want...
Now I want the same text to have single quotes around the data example:
'123', '456', '789'
All that I have tried to adjust keeps missing single quote at the front end and also missing the single quote at the rear end example: 123', '456', '789
Here is the vba I'm running
Sub GetserialNumbers()
Dim FileNum As Long, PathAndFileName As String, TextFromFile As String
Const Delimiter As String = ", "
[Code].....
Whe I run this I have to select the text file to get. I keep it in my documents as a quick access. I'm using MS VBA 6.5 Excel 2007 Windows 7 Enterprise.
I have a SS of a WW1 casualty list and one of the columns is Dates of Birth but the data has been entered in three different formats eg 21/2/1898 or 21.2.1898 or 21 Feb 1898. I have tried to Format Cells and change the date format to the slash but after highlighting a number of fields and right clicking they will not re format. Though i use Excel quite a bit i am a general user and dont understand it in depth.
article using =DATEVALUE(
am using Office 2007.
In an effort to manipulate the xml documents within an xls, you used to be able to change the extension to .zip then open. This no longer works for me, just getting the 'cannot open file: it does not appear to be a valid archive.
I have tried it with a number of different files, but no joy.
It still works with a .doc so I guess it's not that Microsoft have stopped this capability?
Using Excel 2007
I am using excel 2007 and when I change cells my formulas do not automatically refresh. I have set it to automatic and the calculations will not refresh. How I can force a calculation. I did the control alt f9 and nothing seems to work. Any macro that can force all calculations.
View 4 Replies View RelatedI am creating a spreadsheet in Microsoft Excel 2007 which holds information about the airline Emirates which I have created using information from the internet. I am currently creating a sheet which has all their flights in and holds information about the departure time and arrival time of the flight and the type of aircraft ect. I am wondering if there is anyway in being able to have the cell which has the flight number in to change colour (Green or Red) if the flight is in the air or not by using the departure and arrival times already set on the sheet. I am wondering if you possibly need to have a live time on the sheet so that it can work with that .....
View 1 Replies View RelatedI am building this waterfall chart. I'd like to put conditional color formatting to change the vertical bar automatically e.g. if it is positive, the bar color is green and if it is negative the bar color is red.
View 3 Replies View RelatedI recently upgraded from Excel 2003 to 2007, and the worksheet change procedure that i have embedded in my worksheet no longer fires when the criteria are met. If and if I fix it to work in 2007, will it still work in 2003?
Here is my procedure:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngCell As Excel.Range
If Not Intersect(Target, Range("C19:R19")) Is Nothing Then
For Each rngCell In Intersect(Target, Range("C19:R19"))
If rngCell.Value = "BLACK" Then
MsgBox "Please select a shading style", , "Shading Style Required"
End If
Next rngCell
End If
End Sub
(Using Excel 2007)
What would be the quickest and most efficient way of doing the following:
Example
Sheet 1: clicking once, twice, three times in the following cells to change the fill to Red, Yellow, Green respectively (in Row 22, COLUMNS E H K N Q T W Z AD AG) and mirrorring this format/fill on:
Sheet 2: , mirror the selected fill on sheet1 in E22, H22 , K22 in in E3:N3 respectively example E22 (sheet1) is mirrored now in E3 (sheet 2); H22 (sheet 1) is mirrored in F3 (sheet2) etc etc.
I have 35 tabs formatted in the same way - each tab, as with Sheet 1 is linked to a different row on sheet 2 in the same range as is sheet 1 and would need to replicate the mirorring on Sheet 1 to each of the other 34 tabs.
I am an Excel 2007 user.
I have a formula (below) that looks only at records based on specific filtering criteria or conditions; one of those conditions is the month of the year: ('Data Dump'!$Q:$Q,Summary!$A$26). This portion of the formula would change as a month is selected.
Opposed to having to rewrite the formula every time that I want to view a specific month, I want to automate the formula to change the first condition when a user selects a month from Column A. This would be a real time, automatic refiltering and recalculation as the user selects different months from Column A
Current Formula that filters and shows only January records.
=COUNTIFS('Data Dump'!$Q:$Q,Summary!$A$26,'Data Dump'!$D:$D,Summary!$A$2,'Data Dump'!$M:$M,Summary!C$2)
Column A (January is in cell A26)
January
February
March
April
May
June
July
August
September
October
November
December