Excel 2010 :: Count Unique Values In Pivot Table

Jun 20, 2014

I have data set up like the example but then for 1797 lines.

D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo

[code].....

What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3

View 2 Replies


ADVERTISEMENT

Excel 2010 :: Count Unique Values On Pivot Table

Jun 21, 2013

How do count unique values in category in pivot table. (my table, im taking data from ms query). I am using excel 2010

Pivot table example: the result i want is the "no of types" as my data only show "category" and "types".

Category
Types
No of Types

Fruits
Apple
Pear
Orange
3

Vegetable
Cabbage
1

View 4 Replies View Related

Count Unique Values In A Pivot Table

Mar 3, 2004

I have a spreadsheet with several records for each person's name.
I want to have pivot tables based on various columns, with the data field being a count of unique occurrences of a person's name.

When I set up a basic Pivot, it counts each occurence of the person's name.

View 9 Replies View Related

Count Unique Values In Pivot Table

Feb 28, 2008

I have a worksheet with a list of employees and the workgroup they belong to, along with other data like manager, start dates, etc. Recently a couple of the workgroups were duplicated (change in managers), so these employees are showing up on two rows even though the workgroup has the same name. The only differences in the two rows are the workgroup effective start and end dates. I need to be able to count, in a pivot table, the number of unique employee/workgroup combinations there are per workgroup. I can add columns to the sheet, but it's a dynamic set of data that will grow each time it's refreshed...

View 9 Replies View Related

Count Of Unique Values In Pivot Table

Jun 19, 2008

I'm trying to create a pivot table that will count how many employees have completed a Learning Plan. This task becomes complex (for me) because each learning plan has multiple Courses, each Course has a status of "Completed" or "Incomplete". A Learning Plan would only be considered "Completed" if all the courses within that Learning Plan were completed. In doing some research, it looks like I'll need to create another column of data, that shows per employee, per Learning Plan, if the entire Learning Plan has been completed, but I'm not sure of the best way to go about this. Please find SampleData attached.

View 5 Replies View Related

Count Unique Values By Month In Pivot Table?

May 16, 2013

I have data that has a customer name and the month that they were taken care of" (of course not spaces

Customer Month
Smith January
Smith January
Mark January
Suzy January
Smith February
Mark February

I want a pivot table to say:

Month #customers
January 3
February 2

but when I do the count it adds the total number of customer names and gives (it is counting smith twice in January

Month #customers
January 4
February 2

I was reading something about doing the count (so it shows 4) and then doing an index within the count but I keep just getting 1 as the value (for both months).

I tried doing a formula in the document that said =IF(ISERROR(MATCH(A2,$A$1:A15,0)),1,0). basically looking to see if the name is above the location I am looking at and if it is to put a 0 if not put 1 and then do a sum of that column....trouble is that when a customer has orders on more than one month, the second month is coming up with a 0 instead of a 1 (and this happens quite often).

I am not sure what to do. if the customer shows up in more than one month I want them to count towards the unique count of both january and february...we look at each month separately.

View 3 Replies View Related

Excel 2010 :: Count Non-blanks In Pivot Table

May 23, 2012

I have a simple pivot table that is types by state. I want to know how many types are in each state. In the attached image the answer for Alaska is 5, for Arizona 5, for Arkansas 1, etc. How do I get Excel to tell me that for each state?

I'm using Excel 2010. I have PowerPivot installed but really don't know how to use it yet.

View 7 Replies View Related

Excel 2010 :: Pivot Table Copy And Paste Values AND Formatting

Jun 13, 2014

In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):

VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False

I have tried to add, xlPasteFormats, but to no avail...?

View 4 Replies View Related

Excel 2010 :: Pivot Table Reference Is Not Valid When Moving Data And Pivot Table Together?

Mar 19, 2013

On a worksheet, I created:

- a list of data
- a pivottable based on these data

When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.

This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.

View 3 Replies View Related

How To Count Unique Customers Using Pivot Table

Oct 7, 2011

I have the following data:

TRX_IDQTYCUST_ID892486021-67.991623230892486140-35.411623230892486378-29.271623230892486515-60
.711623230892488006-69.081623230892488082-43.261623230892486668-31.091623230892486794-27
.0562118898892546057-42.829337675892487417-19.331623230892487513-33.251623230892488890-33
.61719407892543537-13.891623142892544321-11.021623142892487602-18.921623230

Would like to know the number of unique customers (CUST_ID) have purchases and the sum of those purchases and how many transactions:

CUST_ID Sum of QTY Count of Transactions
50 $2000 1500

I cant seem to find how to do unique Cust using a pivot table - it just gives me a count of cust which is the same number as the number of transactions.

View 5 Replies View Related

Pivot Table - Count Of Unique Value Not Total?

Feb 9, 2012

The pivot table has only two columns, the first is the identification number and the second is the count of the identification number. I am trying to get a count of the number of identification numbers, not how many times it was entered in the spreadsheet (some numbers are entered more than once on different days). It currently looks like:

Column A Column B
00000001 1
00000002 1
00000003 2
00000004 1
00000005 3
Grand Total 8

I'm trying to arrive at 5 for the answer, so that each number is only counted once even if used more than once.

View 3 Replies View Related

Unique Item Count In Pivot Table?

Jun 29, 2012

I have 2 columns. One with a store number. The other with an item. I need to get the count of each item for each store. So:

Store, Item
1, Cashier 1
1, Cashier 2
1, Cashier 2
1, Photo PC 1
1, Cashier 1
1, Cashier 2
2, Photo PC 1
2, Cashier 1
2, Cashier 2
2, Cashier 1
2, Photo PC 2
2, Photo PC 2
2, DriveThru 1
3, Cashier 1
3, Photo PC 1
3, Photo PC 1
3, Photo PC 2

I would like to get to

Store, Cashier 1, Cashier 2, Photo PC 1, Photo PC 2,
1, 2, 3, 1, 0
2, 2, 1, 1, 2
etc....

How can this be done?

View 3 Replies View Related

Count Of Unique Entries As The Subtotal Of A Pivot Table

Jan 28, 2010

I have attached an example of what i am trying to do. I can work out how to calculate unique entries by putting in a formula under a pivot table, but is it possible to select an option in the pivot table settting which will give this result?

View 2 Replies View Related

Pivot Table To Count Unique Items In Large Dataset

Oct 15, 2012

I'm trying to count how many production orders i have per week. However, there are duplicated production orders per week. I only want to count how many unique orders there are for each week. I only see the ability to "Count", which counts my duplicates as well so it over inflates my true quantity.

View 3 Replies View Related

Excel 2010 :: (VBA) Pivot Table And Pivot Cache?

Mar 13, 2014

My macro is designed to look at a summary source tab and create a new tab for each unique project number. It then creates a pivot table from five different source detail tabs and filters on the project number. If a tab already exists it selects the tab and moves on to the next project number. There are six pivot tables created for every project.

New data is added each month to the source tabs and I have a macro to delete all pivot tables and the macro will recreate the pivot tables when ran again.

Issue: Running out of resources At work I'm limited to the use of Excel 2010 (32bit) so I'm restricted on 2GB of memory. At home I ran the file successfully (64bit) and it was around 3GB of memory.

My macro creates a new pivot cache for every pivot table where as I'm trying to only use 6 pivot caches in my coding. I kill it half way through and it's around 100+ caches causing unnecessary usage of memory.

Fix / Solution:

Correctly code the vba to only create six caches and code the rest the pivot tables to use that cache.The only difference in the Pivot Tables is that it’s sorted on the Project Number.

Code:

Dim VBAPPPC As PivotCache
Dim VBAAPPC As PivotCache
Dim VBAPRPC As PivotCache
Dim VBAEXPC As PivotCache
Dim VBAMJPC As PivotCache
Dim VBAIVPC As PivotCache
Dim VBAPT As PivotTable

[code]...

View 1 Replies View Related

Excel 2010 :: Create Sheet With Table From Pivot Table?

Apr 26, 2012

Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.

Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)

View 3 Replies View Related

Listing Unique Values And Summing W/o A Pivot Table

May 27, 2009

I have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:

View 14 Replies View Related

Formula To Count Unique Values Within A Group For Pivot - Paste Special

Jun 26, 2013

I use the following formula to count unique values within a group for a pivot:

=IF(SUMPRODUCT(($CO$2:$CO55681=CO55681)*($E$2:$E55681=E55681))>1,0,1)

When I paste values over the formula it takes around 1 hours to do the 70k cells which is excessive. I want to know if there is a way to speed it up?

I tried doing an =cell and then paste special that and it works really fast but when I delete the actual formula's again the whole sheet locks up.

View 9 Replies View Related

Excel 2010 :: Produce Unique List Of Key Values With Second Values Concatenated Together

Sep 15, 2013

I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)

The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.

Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b

My system is Windows 8 Excel 2010.

View 7 Replies View Related

Excel 2007 :: Extracting All Unique Items From Pivot Table

Feb 20, 2012

I am looking for a way to extract all of the unique items in a Pivot Table. For example, I have a Pivot Table that has category A items and category B items. There may be several B items to one A. For example:

A0
B1
B2
B3A1
B3
B4
B5

Now, what I need is a list that looks like this:

A0 - B1
A0 - B2
A0 - B3
A1 - B3
A1 - B4
A1 - B5

Formatted so that those are two columns. However, in Excel 2007, I cannot set the option to have it repeat the A series items in the Pivot table. Is there some easier way to do this?

View 2 Replies View Related

Excel 2010 :: Pivot Table Grouping

Apr 28, 2014

I had a workbook in Excel 2003 that i just moved to 2010. In the 2003 file I had 2 pivot tables, one each on a worksheet, looking at the same data, just grouped differently. One yearly, one quarterly.

Now in the 2010 workbook whenever I change the grouping on pivot table, the other one changes also. It's like they are linked together or something.

View 3 Replies View Related

Excel 2010 :: Filtering Pivot Table?

Sep 13, 2012

I have a pivot table in 2010- is there a way to filter the data using an external reference from the pivot table? I'd like to put the value in another cell and have the pivot update automatically when I type a new value in that cell.

View 2 Replies View Related

Excel 2010 :: Pivot Table Sorting With VBA?

Apr 10, 2013

Using Excel 2010

I have a workbook with multiple sheets.Sheet1 is named "UPC" and is a giant database for my workbook containing 80,000+ rows and 12 columns.

Sheet2 is named "Scan" and uses a bunch of index-match formulas. Basically, you scan a barcode and it auto-populates across the row all the information it pulls with that particular UPC from the "UPC" sheet. One of my columns, "QTY Scanned", in the "UPC" sheet has a countif formula to keep track of how many times that item was scanned on the "Scan" sheet.

Sheet3 is named "PSlip" and has a big button on it that you press and multiple macros go into overdrive. First macro takes all the rows from "UPC" with a quantity greater than 0 in the "QTY Scanned" column and copies it to the "PSlip" sheet.

Second macro takes that data and makes a pivot table.This is all clothing, pants, shirts, jackets, etc...When my pivot table is created, my Column Label is Size. When the pivot table is created, it automatically sorts it in ascending order, so it goes from numbers to letters.

This is great for pants because the size is in reference to a waist size; 24,25,26,27, etc...

HOWEVER, shirts, jackets, and other tops are not in a numeric size: they are in a Text format. XS, S, M, L, etc...

Sometimes we only scan pants for an order, sometimes only tops, sometimes both.

Is there a way for the pivot table to recognize when tops are in included and automatically sort the sizes?

I still want the numeric values at the beginning, but once the text starts it automatically sorts in this order:

XXS, XS, S, M, L, XL, XXL, MT, LT, XLT, XXLT, 1X, 2X, 3X, 4X, 5X

View 2 Replies View Related

Excel 2010 :: Create Pivot Table VBA

Nov 26, 2013

I'm trying to create a pivot in vba. I can record what I have done but if I run that recorded code, it returns an error "Invalid call procedure or argument".

Code:
ActiveSheet.PivotTableWizard SourceType:=xlDatabase, _
SourceData:=Sheets("Raw Data").Range("A1:AG" & Z), _
TableDestination:=Range("A3"), _

[Code].....

View 1 Replies View Related

Excel 2010 :: Pivot Table Showing Zero Instead Of Value

Mar 8, 2014

My problem is this: I use Excel 2010 and have Pivot Tables that are using a Data Connection which is being built (and rebuilt) with VBA. The Pivot Table field is calculating a field that contains an integer value. The Pivot Table field filter properly displays this value.

However, the Pivot Table itself calculated Sum field only displays 0 (aka zero). Other fields that are exactly the same as this one are displaying properly.

My data connection is built as follows:

Code:

ThisWorkbook.Connections.Add "ChartQuery", "", "OLEDB;Persist Security Info=0;DSN=Excel Files;
DBQ=" & wbFullName & _ ";DefaultDir=" & wbPath & ";DriverId=1046;MaxBufferSize=1024;PageTimeout=5;
BackgroundQuery:=False", sSQL, 2
(And yes, my sSQL is sound, there are no typos, no special character issues)

The filter in the Pivot Table shows my value (for example, 14) however it always only displays a zero

My Pivot Table is formatting the field (like the others just like it) as a Number, two decimals
My Pivot Table data source is ChartQuery

The worksheet this is pulling from is also set to use Number format for the entire column, but changing that doesn't make any difference even on the other fields that are working.

View 9 Replies View Related

Excel 2010 :: Pivot Table - Value Field - Multiply

Apr 25, 2014

I have a Pivot table showing costs of several types of items.

The issue is, the cost of an item is not in U$, it is in amounts of the unit value (example: Unit value of an item (cell A1) = U$500, and Item Cost (cell B1) = 2, the total cost is U$1000).

So instead of showing just the Item Cost (U$500) in the pivot table, I need to show 500*2 (A1*B1) which would be U$1000.

Can this be done in Excel 2010?

I don't want to create a new column with that multiplication, because I'm doing a monthly cost for the items.

View 3 Replies View Related

Excel 2010 :: Pivot Table Blank Column?

Jan 27, 2014

Why do blank columns with no information sometimes appear when I prepare pivot tables? Excel Version 2010. I hide the columns, but many times they re-appear on screen or print-outs.

View 1 Replies View Related

Excel 2010 :: Hierarchical Display In Pivot Table?

Dec 1, 2011

I tried multiple variations of searches for this, but can't seem to get this to work. I've been asked to perform some analysis on the number of direct reports for each manager in our company as well as the number of total reports. I have been able to calculate this with no problem. My difficulty comes with the request to be able to display this information in a particular way with Excel. (this is using Excel 2010)

What the VP would like to be able to do is to drill down on each manager to see all of their direct reports, and then, for any of those direct reports that are managers, be able to further drill down into those people's direct reports. The difficulty I am coming to is that, depending on the employee, there can be as many as 9 layers of management when I work this all the way up to the Executive Vice President Level.

My data is currently laid out such that my first 5 columns are identifiers such as employee id, employee name, job title and organization information. After that I have columns for the managerial hierarchy. For example first column of this (let's call it column H) is the EVP, the 2nd column (column I) is the Senior VP, 3rd column (column J) has the various reports to the senior VP, 4th column (column K) is the managers that report to those in column J, and so on, up to 9 layers.

For example, one of the employees in my finance area would have name of the EVP in column H, the SVP in column I, the director in column J, and their manager in column L. The remaining columns that could house hierarchy data are blank for them because of where they are in the hierarchy.

When I set up the pivot table, I placed each field of the managerial hierarchy in the row area and then the employee field at the end. The problem I encounter is that with all of the blank cells in the data due to the varying levels of the hierarchy, I get a lot of (blank) fields in the pivot table for any layer below where the person fits in (ie, for the example above, the EVP, SVP, and manager name come in find, but then it is (blank) on down to the employee name.) If I deselect (blank) in the field settings, it eliminates all of the rows that don;t go as far down in the hierarchy, i.e. I deselect (blank) at level 5, any employee that is 4 or less levels from the EVP does not appear.

I also tried doing the same as above but including the employee name in my hierarchy (so for the example above, the employee name would be placed in column M). This worked a bit, but then after every employee was the series of (blank) drill down options.

The ideal solution that I've been asked to come up with would be to have the data display as it does when I've set the pivot table up with the employee name in the appropriate hierarchy level, but not have the drill down (blank) show for those that don't have layers below them.

View 1 Replies View Related

Excel 2010 :: Cannot Create Pivot Table In New Sheet

Jan 21, 2012

I get a "Object variable not set" error when creating a Pivot Table from a cache. I want the destination to be in a different sheet in the workbook. I set the new worksheet as: Set WSD = Worksheets.Add and I reference WSD.Cells(2,FinalCol +2) in the destination field of the CreatePivotTable method. I use the code from the Excel 2010 VBA book I got last week.

View 9 Replies View Related

Excel 2010 :: Pivot Table Filter Query

Feb 21, 2012

I have created a pivot table in Excel 2010 that lists amounts used of particular items each month. Inside the pivot table value field settings i have changed the show values as field so that it displays the difference in usage from this month to last.

However if i now select a top 10 filter it only filters by the total number used as opposed to the difference in usage from one month to the next (which is the values displayed).

Is there a way that i can filter by top 10 by the actual values displayed in the pivot chart and not just the underlying data that creates it?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved