As per my attached file : duplicate value.xlsx
How to highlight duplicate value by using Conditional Formatting in office 2010.
Actually i Know how to use this feature in sheet "example" of my attachment.
But i want to highlight inv# 457878268 in cell E9 of sheet "My requirement" if it is exist above in cell E2 to E6.
I am trying to use condtional formatting to highlight a row in a table if the order number is NOT on another table, on a different sheet. Example: Order Number 1001 is in my table on Sheet4, Once the order has been filled is comes off my "Pending Orders" table on Sheet1, which is based on a data connection, so it updates once the connection is refreshed. I would like the row with order number 1001 in my table on Sheet4 to be highlighted letting me know it can now be removed, since I have to manually manage this table. I am using Excel 2010.
View 3 Replies View RelatedI am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
How can we find or highlight the duplicate value in two different sheets using conditional formatting.
View 3 Replies View RelatedI would like (in excel 10) to highlight cells where there is NO DUPLICATE found In Columns "E" on Worksheets 1 & 2. Is that possible ?
View 7 Replies View RelatedI need conditional format in column Q which highlight in red, any date over 14 days old.
This column also contains texts (non-dates) and these need to be left alone.
I've experimented with a few bits of formula I've found online, but nothing has worked . .
I'm on Excel 2010.
I need a conditional formatting formula that will highlight the second instance of a combination of values from two columns.
For example, Column A is a person's name and Column B is a drop down with 3 options (Street Address, Phone Number, and Email Address). If Row 2 says John Smith (Column A) and Street Address (Column B) and Row 6 also says John Smith (Column A) and Street Address (Column B), what conditional formatting formula would I use to highlight Row 6 as duplicate information?
Name
Information
John Smith
Street Address
Mary Black
Email Address
[Code] ..........
Using Excel 2010
I need to "Fill" cells A1 to A10 with a fill colour if cell A1 contains anything (Value or characters)
Is it even possible using Conditional Formatting rather than VBA?
I'm running Windows XP with Excel 2010. I would like to be able to have a group of 19 boxes of which each box has a unique entry, ie 1, 3B, 5C etc. Each box I'd like to have a way in which when selected only the single or dual unique characters show as a color. See attached spreadsheet with sample. When a cell with lets say 1 is selected, a drop box appears and the color and description are shown. Select a color but only show the 1 and the color selected, leaving behind the description. How can I do this for all 19 boxes. This seems like its a classic conditional format. Unfortunately it appears to be several orders of difficulty than a normal conditional format.
View 2 Replies View RelatedI need to generate conditional formatting in Excel 2010.
For the planned date of material submittable should turn yellow before 10 days ago & planned date of material submittable should turn Red when overdue.
I'm trying to do conditional formatting that applies to an entire column (that way there are fewer conditional rules), but it only applies to a certain range of cells within that column. So what I did was setup the rule such as:
Applies To:
=$B:$Z
Formula I want to use:
=AND(MOD(ROW()-3,49)=38,INDIRECT("B"&ROW()-4)>=0)
If I copy the entire formula into a cell on the spreadsheet itself, it works just fine returning TRUE and FALSE depending on what row I'm on.
However, the above formatting rule does NOT format ANY row. But if I remove the AND function and the first condition (the one that limits which rows it's actually going to apply to) then it will work...OR if I do NOT use the INDIRECT function then it seems to work, it's some weird combonation of using the two together that is causing it to not evaluate to true.
Oh, and I thought of trying to get the formatting to work with the INDIRECT...then I put in the AND function but the only parameter was the original INDIRECT function (see below)...it stops formatting!
=AND(INDIRECT("B"&ROW()-4)>=0)
Office 2010 on Windows 7 64bit
I have a spreadsheet where we track our contractor's Worker's Comp and General Liability insurance certificate expiration dates. I want the expiration date to highlight in red if it is expired and to highlight in orange if it will expire within 30 days or less.
I have attached a testing sheet similar to what I'm working on. The F column has the dates that need to highlight. I have MS Excel 2010.
I am trying to do a conditional formatting based on the result in one cell but it needs to add up multiple cells first to determine which conditional format it needs to use. I am not sure whether I need to do a formula conditional format or whether to use cell is greater than with =sum() in it. I have tried both but neither seem to be working correctly. I have attached an example of the spreadsheet and the conditions I am trying. I am using 2010 version.
Basically, the closing amount for Monday in prod 1 (cell c4), needs to display in red if sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4) & Fri (R4) is greater than that value or display in amber if the sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4).
I need to complete the same for the whole column for Monday (col C) for each appropriate product. Then the same for column B but this will sum different cells but the principal will be the same.
I have a date in column A. I want to format to YELLOW column F based on whether column F is blank and 20 days past column A. I also want the formatting to change colors to RED if it remains blank past 30 days. Then, when column F is filled in I want the formatting to be removed.
I am working in Excel 2010
I've run into an issue where conditional formatting is working correctly 98% of the time, but 2% seems beyond logic. Basically if I have more than 120% of Stock Limit on hand I want the cells to turn green. To do this I entered the following Conditional Formatting formula in cell D4:
HTML Code:
=((D4-$C4)/$C4)>=$E$1
I copied the formatting to all the other cells in the range, and most are colored correctly. This is what I get:
Sheet1
ABCDEFGHIJ1
Overstock Threshold: 120%
2Location:ABC
3ItemNameMin Limit5/1/20126/1/20127/1/20128/1/20129/1/201210/1/201211/1/20124123Part A2-328765435234Part B35-2-21212489898
As you can see, it works correctly for the most part, however some cells, such as cell H5 in the example, that should be colored by they aren't.
My first thought was that this is an issue with the reference, because as I examine other cells it doesn't look like conditional formatting formulas are updated relative to that particular line, however that is the same case for my red formats and those are correct. I have over 50,000 rows so creating a new formula for each row certainly isn't the preferred option, neither is writing a macro to manually color them because of the processing time. I'm using Excel 2010.
Excel 2010. I have a field that is color formatted based on the value of another field, which is calculated.
The conditional formatting does not refresh when the value is recalculated, but when I go away from the tab and come back, it works fine.
Any simple VB code to refresh the conditional formatting upon a workbook change?
USING EXCEL 2010
I'm looking to create a conditional format which highlights a date RED if it is within 90 days of today's date (the date the file is opened). What would the formula for that look like?
I have two conditions for a cell. One is that it counts the time elapsed in cell M4, (=now()-J4). The other is whether or not we are still waiting for a response (in cell L4, Y or N). What I would like to do is make it so that when we are still waiting for a response the M4 cell is highlighted yellow if more than 3 days and red if more than 6 days, but if cell L4 is changed to "N", then the formatting goes away. II use Excel 2010.
View 1 Replies View RelatedExcel 2010
Conditional Formatting 1 cell with 3 different formulas
I am monitoring tank levels using a program called "PI". I need to know if the tank is rising, lowering or staying the same.
I am using conditional formatting to turn red if high, blueif low and yellow if stays the same. Column B, F and J are tank volumns, Column C is in feet and D is in inches.
A B C D E F G H I J K L
1 TIME LEVEL FT IN TIME LEVEL FT IN TIME LEVEL FT IN
2 7:00 3628 18 11 9:00 3456 18 0 11:00 3321 17 3
AB AC AD
1305 5600 3600
LOW HIGH CURRENT
I started using formals =$B$2=$AD$2 COLOR YELLOW
=$B$2>$AC$2 COLOR RED
=$B$2
Using Excel 2010.
The background to this question is that I'm trying to replicate conditional formatting using a user VBA function, because I require a thick border around the cells (and the conditional formatting within Excel only has thin borders)
In the final function, there will be 9 combinations of formatting {Red, Amber, Green} interior with {Red, Amber, Green} thick borders.
The formatting is determined by a number in another cell (the "target" cell), which returns a value 0,...,8
I've only got as far as filling in the interior for the first combination, but the function returns an error "Application-defined or object-defined error".
VB:
Function VBA000_003_SetRAG(strTargetRange As String) 'strTargetRange is the reference for the target cell that contains the value 0,...,8
On Error Goto handler [code]....
There is not a problem with the target range, if I remove the two lines relating to rngCaller then the function works OKExecuting the rngCaller.Interior.Color = RGB(255, 0, 0) command through the Immediates window works OKI've tried calling a subroutine & passing the range across
Same errorChanging the range in the subroutine to an absolute range (eg. Sheet1.range("A1")) also causes the
same errorExecuting the subroutine on its own (with the absolute range) works OK
So my guess is that it's a bug/limitation with Excel VBA when trying to execute commands from inside a user function
I need to highlight a column in a pivot based on the 3 rules below.
Highlight cell in column A if:
Cell in Column A contains numbers 4, 5, 6. or 6.5.
Cell in Column D contains a value
Cell in Column E contains a value
An example of how it should look (Excel 2010): MrExcelhelp1.xlsx
Formula to put in conditional formatting?
I am trying to use conditional formatting to calculate when the date in the top column gets within 60 days from expiring to turn yellow, 30 days from expiring to turn orange and when it expires to turn red. The dates that are listed from row 5 down are when the classes were taken. the expiration date will be based on row 3. Some are annual,3 years and 5 years, etc. I am using Excel 2010....
View 10 Replies View RelatedI have a workbook containing two worksheets of staff training records.
The first work sheet contains a list of names and the dates they completed various training courses. I have used some simple date based formulas and conditional formatting to colour-code their name depending on whether their earliest retraining due date has passed, is coming up in the next few weeks, or is a long way off. The data is set out alphabetically, one person per row of data.
The second sheet contains the same list of names, but each person's data is split across two consecutive rows. The cells in column A which contain the staff names are merged in pairs so that the name heads both rows of data.
I want the colour coding of the merged name cells in sheet 2 to automatically copy the colour coding applied to the single name cell in sheet 1, but don't know how.
I'm using excel 2010.
I have a problem where Excel 2010 is deleting one of my conditional formatting conditions. I do not know if it is deleting it on open or close. I just know that I enter the conditional formatting, save the workbook, close the workbook, reopen the workbook, and it is gone.
The other conditional formatting conditions (simple "Cell is Blank") are left intact.
Setup:
Cell with conditional formatting is on sheet "MyRecord" at "$E$7". A corresponding boolean value on separate sheet "Data" and must be referred to by using "OFFSET" with a record locator value (workbook level named range "RecordLocator") that leads to corresponding data row, so looks like following:
Code:
=IF(OFFSET(Data!$D$5,RecordLocator,0),TRUE,FALSE)
When I configure this, it works great until I save and close the workbook. When I reopen the workbook, this particular conditional formatting is gone with all other conditional formatting left intact.
I've tried using the actual range address in place of range name "RecordLocator", changes nothing.
I can't figure out why Excel deletes this particular conditional format.
I am using Excel 2010 on XP. I would like to apply conditional formatting to shade every group in alternating color. For example, I have a list of US states. I have a formula already to produce this:
Current Conditional Formatting Formula: =MOD(SUM(1/COUNTIF($a$2:$a2,$a$2:$a2)),2)=1
STATES (unfiltered)
AL
AL
AK
AK
AK
AR
AR
AZ
AZ
AZ
When I apply a filter, the rows remain shaded as they were originally:
STATES (Filter OUT AK)
AL
AL
AR
AR
AZ
AZ
AZ
I want the conditional format to change when I have filtered out items (DESIRED RESULT):
STATES (Filter OUT AK)
AL
AL
AR
AR
AZ
AZ
AZ
I would assume SUBTOTAL(3,...) would need to be incorported into the conditional formatting formula above, but I do not know how.
I'm using Excel 2010.
I have created a spreadsheet with 3 month inspection schedules on using the formula below.
=DATE(YEAR(C50),MONTH(C50)+3,DAY(C50))
I then copy this in to a cell where I want the date to appear... and then in to another cell where I want a further 3 month date to appear. Obviously changing the cell reference.
I would like the formula to ignore the very first cell "C50" if there is no date inputted in this cell.
I'm new to 2010 and can't work out the new conditional formatting! I need to be able to enter a letter in A1 and have E1, F1 and G1 automatically show a different letter in each cell (different coloured fonts in each cell as well).
View 3 Replies View RelatedI'm using Excel 2010 on my Mac. I would like to set up the data as follows:
A
B
C
D
E
F
NAME
DATA X
DATA Y
DATA Z
DATA XX
DATA YY
NAME
90%
88.2
410
88.4%
97.8
[Code] ........
Now what I would like to do is have the data in each column highlighted a certain color based on specific ranges. For example in Column B I want anything from 92% - 100% highlighted blue. I would like 83% - 91.9% highlighted purple, and anything under 83% highlighted red. Do I need to have a conditional format entered in each cell? Can I set up a conditional format for the whole column? Once I can figure the formatting in my example the remaining columns will be a breeze since they will be set up in the same manner just different number ranges, same colors will apply.
I am using the following formula on Excel 2010 in conditional formatting
=$D5=VLOOKUP($B5,'Approved Master OLD'!$B:$BC,3,0)=FALSE
However I am trying to apply this to a whole column but the numbers are not (D5,B5) moving down (to D6,B6), When I use the format painter it is taking too long as I can only merge conditional formatting on one cell at a time and I have 30 colums and 390 rows to apply this formatting to.
