Excel 2010 :: Pivot Table Conditional Formatting - Highlight ENTIRE Row
Aug 16, 2013
I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
View 2 Replies
ADVERTISEMENT
Nov 26, 2013
As per my attached file : duplicate value.xlsx
How to highlight duplicate value by using Conditional Formatting in office 2010.
Actually i Know how to use this feature in sheet "example" of my attachment.
But i want to highlight inv# 457878268 in cell E9 of sheet "My requirement" if it is exist above in cell E2 to E6.
View 3 Replies
View Related
Apr 24, 2013
I am trying to use condtional formatting to highlight a row in a table if the order number is NOT on another table, on a different sheet. Example: Order Number 1001 is in my table on Sheet4, Once the order has been filled is comes off my "Pending Orders" table on Sheet1, which is based on a data connection, so it updates once the connection is refreshed. I would like the row with order number 1001 in my table on Sheet4 to be highlighted letting me know it can now be removed, since I have to manually manage this table. I am using Excel 2010.
View 3 Replies
View Related
Apr 12, 2013
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
View 3 Replies
View Related
May 9, 2014
I need to highlight a column in a pivot based on the 3 rules below.
Highlight cell in column A if:
Cell in Column A contains numbers 4, 5, 6. or 6.5.
Cell in Column D contains a value
Cell in Column E contains a value
An example of how it should look (Excel 2010): MrExcelhelp1.xlsx
Formula to put in conditional formatting?
View 4 Replies
View Related
Feb 25, 2012
in order to perform conditional formatting for entire row, if one condition satisfy for particular Cell then entire row should get highlighted.
View 5 Replies
View Related
Dec 30, 2013
I have a quantity - thick/dia - width - length fields used as row labels, I would like each cell to have a border, after each update I get negative results to preserve the cell border formatting. Col b,c,d,e continually lose their cell border formatting after updating the data.
PIVOT TABLE FORMAT PRESERVATION DURING UPDATE 12-30-13.xlsx
View 1 Replies
View Related
Jun 13, 2014
In excel 2010, I'm using the following to copy and paste values and formatting from a pivot table, but i lose the formatting (TableStyle2 = "PivotStyleLight8"):
VB:
Selection.CurrentRegion.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I have tried to add, xlPasteFormats, but to no avail...?
View 4 Replies
View Related
Jan 2, 2014
I'm working in Excel 2010.
I setup a table with a column titled "Type". Each value under column "Type" defines the type of row it is: "Section", "SubSection", "SubSubSection"
I wish to create a set of conditional formatting rules that apply to data rows in this table, each rule controlling how cells within a whole row should be formatted, according to the value found in "Type", for that row.
Example:
Rule1: [@Type]="Section" -> fat red line on top of cell.
Rule2: [@Type]="SubSection" -> thin black line on top of cell.
Rule3: [@Type]="SubSubSection" -> dashed black line on top of cell.
I can't seem to make this work.
How can I leverage the nice column names, and the "@"-this row designator, within a table to create conditional formatting rules that apply to all the cells within a row, in the same way one can refer to in table formulas?
View 2 Replies
View Related
Apr 10, 2013
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
View 4 Replies
View Related
Mar 19, 2013
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
View 3 Replies
View Related
Jun 22, 2014
writing VB code to conditionally-format the pivot table shown here (I am not inclined to use the Excel Conditional formatting option as it loses the formatting when refreshing the pivot table)
Excel_screenshot1.png
I need a VB macro that reads each value in a Pivot table .. starting with the Col1, Row1 of the Pivot table .
It then matches the value in Col 1, Row1 to the Baseline value for Col 1 that is specified in (Yellow ) .
Note : The Baseline values are not part of the Pivot table area
If the value in in the Col 1, Row1 is less than the baseline value for that column at the top ,it formats the font color of that pivot table cell (say to red) It then moves to read the value in Col 1, Row2 and does the same check .
Once it completes the check on all values in Col 1, it does the same with Col 2 (where the values are compared to the baseline value for Col 2) ... and so on until all the colums of the PIvor table are validated in the same manner .
View 1 Replies
View Related
May 15, 2012
I am using Excel for Mac 2011. I am trying to conditionally format the cells that apply to each row in the table with the exception of the grand total (listed as the bottom row). Depending on the filter applied by the user, the number of rows can go from 1 to 10. I have seen where some people have applied based on whether the cell showed a sum of some component in the source data. I am looking for this within the Mac version and have not found it. Do I need to write something in VBA to format it after refresh?
View 1 Replies
View Related
Feb 26, 2014
I need conditional format in column Q which highlight in red, any date over 14 days old.
This column also contains texts (non-dates) and these need to be left alone.
I've experimented with a few bits of formula I've found online, but nothing has worked . .
I'm on Excel 2010.
View 3 Replies
View Related
Oct 3, 2013
I need a conditional formatting formula that will highlight the second instance of a combination of values from two columns.
For example, Column A is a person's name and Column B is a drop down with 3 options (Street Address, Phone Number, and Email Address). If Row 2 says John Smith (Column A) and Street Address (Column B) and Row 6 also says John Smith (Column A) and Street Address (Column B), what conditional formatting formula would I use to highlight Row 6 as duplicate information?
Name
Information
John Smith
Street Address
Mary Black
Email Address
[Code] ..........
View 2 Replies
View Related
Mar 25, 2014
I have a pivot table which shows below... I need to set up a conditional format to highlight the row where all fields are "0"
Company
Deals
Opps
Days since Deal
Days since Opp
Days since Meet
Co 1
1
7
80
20
20
Co 2
0
0
0
0
0
Co 3
1
4
30
30
28
Co 4
3
3
30
30
37
View 1 Replies
View Related
Mar 13, 2014
My macro is designed to look at a summary source tab and create a new tab for each unique project number. It then creates a pivot table from five different source detail tabs and filters on the project number. If a tab already exists it selects the tab and moves on to the next project number. There are six pivot tables created for every project.
New data is added each month to the source tabs and I have a macro to delete all pivot tables and the macro will recreate the pivot tables when ran again.
Issue: Running out of resources At work I'm limited to the use of Excel 2010 (32bit) so I'm restricted on 2GB of memory. At home I ran the file successfully (64bit) and it was around 3GB of memory.
My macro creates a new pivot cache for every pivot table where as I'm trying to only use 6 pivot caches in my coding. I kill it half way through and it's around 100+ caches causing unnecessary usage of memory.
Fix / Solution:
Correctly code the vba to only create six caches and code the rest the pivot tables to use that cache.The only difference in the Pivot Tables is that it’s sorted on the Project Number.
Code:
Dim VBAPPPC As PivotCache
Dim VBAAPPC As PivotCache
Dim VBAPRPC As PivotCache
Dim VBAEXPC As PivotCache
Dim VBAMJPC As PivotCache
Dim VBAIVPC As PivotCache
Dim VBAPT As PivotTable
[code]...
View 1 Replies
View Related
May 24, 2007
Below is some code I am trying to run. What I would like to do is select a certain "data row" in the pivot, and apply some conditional formatting to that. It works just fine until I reach the .colorindex = 3 line. It says I'm getting an application/object defined. how to fix this? I'm on Excel 2007. This was fine on 2000!
pvtCurrent.PivotSelect "'% Dist'", xlDataAndLabel
With Selection
With .Interior
.ColorIndex = 36
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
End With
With .FormatConditions.Add(xlCellValue, xlBetween, "0", "0.97")
With .Font
.Bold = True
.ColorIndex = 3
End With
End With
End With
View 4 Replies
View Related
Jul 30, 2007
I am running office 2007. I am using conditional formatting in a pivot table to highlight rows where the value in the last column meets a particular criterion. However everytime I update the table the formatting gets lost. I have looked through all the threads I can find to establish if there is some VBA code that I can use to reapply the required conditional formatting after each update
View 2 Replies
View Related
Apr 25, 2014
I am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?
Image attached : Capture.JPG
View 2 Replies
View Related
Apr 26, 2012
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
View 3 Replies
View Related
Sep 24, 2013
Using Excel 2010
I need to "Fill" cells A1 to A10 with a fill colour if cell A1 contains anything (Value or characters)
Is it even possible using Conditional Formatting rather than VBA?
View 3 Replies
View Related
Jan 5, 2013
I'm running Windows XP with Excel 2010. I would like to be able to have a group of 19 boxes of which each box has a unique entry, ie 1, 3B, 5C etc. Each box I'd like to have a way in which when selected only the single or dual unique characters show as a color. See attached spreadsheet with sample. When a cell with lets say 1 is selected, a drop box appears and the color and description are shown. Select a color but only show the 1 and the color selected, leaving behind the description. How can I do this for all 19 boxes. This seems like its a classic conditional format. Unfortunately it appears to be several orders of difficulty than a normal conditional format.
View 2 Replies
View Related
Feb 19, 2013
I need to generate conditional formatting in Excel 2010.
For the planned date of material submittable should turn yellow before 10 days ago & planned date of material submittable should turn Red when overdue.
View 1 Replies
View Related
Jan 10, 2012
I'm trying to do conditional formatting that applies to an entire column (that way there are fewer conditional rules), but it only applies to a certain range of cells within that column. So what I did was setup the rule such as:
Applies To:
=$B:$Z
Formula I want to use:
=AND(MOD(ROW()-3,49)=38,INDIRECT("B"&ROW()-4)>=0)
If I copy the entire formula into a cell on the spreadsheet itself, it works just fine returning TRUE and FALSE depending on what row I'm on.
However, the above formatting rule does NOT format ANY row. But if I remove the AND function and the first condition (the one that limits which rows it's actually going to apply to) then it will work...OR if I do NOT use the INDIRECT function then it seems to work, it's some weird combonation of using the two together that is causing it to not evaluate to true.
Oh, and I thought of trying to get the formatting to work with the INDIRECT...then I put in the AND function but the only parameter was the original INDIRECT function (see below)...it stops formatting!
=AND(INDIRECT("B"&ROW()-4)>=0)
Office 2010 on Windows 7 64bit
View 5 Replies
View Related
Jun 21, 2011
I have a spreadsheet where we track our contractor's Worker's Comp and General Liability insurance certificate expiration dates. I want the expiration date to highlight in red if it is expired and to highlight in orange if it will expire within 30 days or less.
I have attached a testing sheet similar to what I'm working on. The F column has the dates that need to highlight. I have MS Excel 2010.
View 6 Replies
View Related
May 16, 2013
I am trying to do a conditional formatting based on the result in one cell but it needs to add up multiple cells first to determine which conditional format it needs to use. I am not sure whether I need to do a formula conditional format or whether to use cell is greater than with =sum() in it. I have tried both but neither seem to be working correctly. I have attached an example of the spreadsheet and the conditions I am trying. I am using 2010 version.
Basically, the closing amount for Monday in prod 1 (cell c4), needs to display in red if sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4) & Fri (R4) is greater than that value or display in amber if the sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4).
I need to complete the same for the whole column for Monday (col C) for each appropriate product. Then the same for column B but this will sum different cells but the principal will be the same.
View 3 Replies
View Related
Mar 29, 2012
I have a date in column A. I want to format to YELLOW column F based on whether column F is blank and 20 days past column A. I also want the formatting to change colors to RED if it remains blank past 30 days. Then, when column F is filled in I want the formatting to be removed.
I am working in Excel 2010
View 1 Replies
View Related
May 30, 2012
I've run into an issue where conditional formatting is working correctly 98% of the time, but 2% seems beyond logic. Basically if I have more than 120% of Stock Limit on hand I want the cells to turn green. To do this I entered the following Conditional Formatting formula in cell D4:
HTML Code:
=((D4-$C4)/$C4)>=$E$1
I copied the formatting to all the other cells in the range, and most are colored correctly. This is what I get:
Sheet1
ABCDEFGHIJ1
Overstock Threshold: 120%
2Location:ABC
3ItemNameMin Limit5/1/20126/1/20127/1/20128/1/20129/1/201210/1/201211/1/20124123Part A2-328765435234Part B35-2-21212489898
As you can see, it works correctly for the most part, however some cells, such as cell H5 in the example, that should be colored by they aren't.
My first thought was that this is an issue with the reference, because as I examine other cells it doesn't look like conditional formatting formulas are updated relative to that particular line, however that is the same case for my red formats and those are correct. I have over 50,000 rows so creating a new formula for each row certainly isn't the preferred option, neither is writing a macro to manually color them because of the processing time. I'm using Excel 2010.
View 2 Replies
View Related
Jun 18, 2012
Excel 2010. I have a field that is color formatted based on the value of another field, which is calculated.
The conditional formatting does not refresh when the value is recalculated, but when I go away from the tab and come back, it works fine.
Any simple VB code to refresh the conditional formatting upon a workbook change?
View 1 Replies
View Related
