# Excel 2010 - Getting Average When Have A List Of Dates

May 29, 2014
Data example is displayed below. I need to know how to find the average, not date average, but count. What is the average per day? Example on 2/9/2014 there are 12 entries but on 2/10/2014 there is only 1. Example: For all the lines of data that I have, what is average per day?

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

[code].....

View 4 Replies
ADVERTISEMENT
Aug 9, 2013

I'm trying to create a set of three dynamic/dependent drop down lists of date values, based on a set of imported data. Depending on whether the preferred choice is to list all dates in a range or just dates on the 15th, the available start and end drop down lists will change.

In addition, if possible I would then like to display a list of valid dates (not sure if this needs to be VBA).

The attached sheet shows/explains what I am attempting but here it is as well:

If B3 is set to show all dates in the month then:

the first dropdown option for C3 will be the first date of IMPORT (D2)

the first dropdown option for C4 will be the C3 value, to the last date in IMPORT (D) column

If B3 is set to show 15th of the month then:

the dropdown for C3 will be the first date of IMPORT (D) column with a date of 15th the dropdown for C4 will be in the range of C3 to the last date of IMPORT (D) column with a date of 15th only dates of 15th will be listed in both C3 and C4 dropdownlists

General

the dates in IMPORT column D are taken from IMPORT column A, B & C, which will be imported and will always be date sequential the number of rows of date entries will change with every import but there will never be any blank rows between dates the values in IMPORT columns A, B & C will always be numerical, and can be referenced if required [ideally] the LIST OF DATES will be populated with the date range, based on the option selected in B3

I'm fairly familiar with Excel (2010) and I have also done some VBA but I'm new to dynamic, nested dropdown lists and I'm unsure what the most practical way is to achieve this.

View 1 Replies
View Related
Nov 8, 2012

I'm trying to make a simple chart, which maps the value of an investment fund over time. I wanted to use the new 'Table' feature within Excel 2010 to format and maintain the formulae within the Table, and the 'Header' for the table contains the date, which is not at regular intervals.

If I opt not to use the Table feature, I can create a line-chart with ease, and Excel recognises that the Dates are indeed dates and plots the graph correctly. The minute I convert over to a Table, the Date headers are no longer recognised as dates, and are instead plotted as if they were text, at regular intervals.

I've tried multiplying the Date Headers by 1 to force them back to true Dates, but this still does not work. I've also changed the setting on the horizontal axis to Date axis rather than automatic, but still no joy.

View 1 Replies
View Related
Jul 20, 2013

Finding an average age from a list of dates. This is just a small sample:

7/9/2013

7/10/2013

7/10/2013

7/10/2013

7/11/2013

7/11/2013

7/14/2013

7/14/2013

7/19/2013

7/19/2013

I tried using =AVERAGE(DAY(A1:A10)) CTRL + SHIFT + ENTER, but that just doesn't seem correct.

View 9 Replies
View Related
Jul 23, 2014

I am using Excel 2010 and I am currently trying to find the Avg Min / Avg Max costs for 4 different groups.. Players, Accompanying, Coaches, Medical.

I need it to get the minimum values from 3 different sections ( I am using custom names for them such as PlayerReg for Player Registration costs ) once it gathers the minimum / maximum values from the 3 different sections it needs to add them together to display the Avg Minimum / Maximum for each group.

At the moment I have =MIN(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Minimum /w Frequent Flier although the minimum value it should detect is $948.75 it displays $1115.

For maximum I have

=MAX(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Maximum /w Frequent Flier although once again this value should be $1174.50

Although for some reason it displays $978.75 - which is the minimum cost. The Maximum figures for the other groups (Accompanying, Coaches and Medical) don't even display values Instead it just has #VALUE! in which I'm guessing I have something wrong with it.

View 2 Replies
View Related
Apr 10, 2014

Basic Excel-2010 functions.

I have given a table with some decimal values like e.g 0.3658 0.358 0.485 0.7863 0.558 0.858 0.985, I want to find the sum and average of these number.

1) I have tried the autosum or auto Function =AVERAGE(A2:A7) but it yields #DIV/0! error

2) when I use =AVERAGEA(A2:A7), it yield ans=0

3) puttin =ROUND(AVERAGEA(H2:H23);3) also yields 0;

View 4 Replies
View Related
Sep 10, 2012

I have a sequence of 40 columns of data, representing 10 weeks worth of events with 4 values per week

I need to average the first pair for each week, ignoring zeros and blanks, and also separately the 2nd pair of cells, across the whole 40 columns

I am trying to come up with a neater solution which takes into account the zeros, at the moment I have the following which does not, for row 34

=IF($AR34>0,ROUND(AVERAGE(D34:E34,H34:I34,L34:M34,P34:Q34,T34:U34,

X34:Y34,AB34:AC34,AF34:AG34,AJ34:AK34,AN34:AO34)*2,2),0)

I could use SUM, COUNT COUNTIF etc but its gonna get messy

Using EXCEL 2010

View 5 Replies
View Related
Jan 4, 2014

I am working with Excel 2010 and I have a problem that I can't seem to figure out. I am trying to find the first nonzero cell and begin an average function from that cell and down through 29 rows (a total of 30 rows).

Sub average()

FinalRow = Cells(Rows.Count, 3).End(xlUp).Row

For I = 3 To FinalRow

If Cells(I,3).Value 0 Then

'I use the above to identify the first nonzero cell

ActiveCell.FormulaR1C1 = "average(........)

This is where I am stuck, I don't know how to code the first nonzero (which can change with different data) cell and average rows below it.

View 7 Replies
View Related
Apr 3, 2014

In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.

We created a SQL Server view of this column and other columns of info joined together from several tables.

Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.

Excel 2010 displays each of the columns in our view.

The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.

We want to calculate the average time in this column.

We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.

We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.

We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.

View 1 Replies
View Related
Apr 5, 2012

How I could create a chart (standard column) with an average line in Excel 2010?

View 4 Replies
View Related
Jul 5, 2012

Using Excel 2010.

I am trying to come up with a formula that will return a total average from two columns of dates with criteria. The range will need to cover an entire column as my data is continuously growing and the criteria would have to limit the start date to each month. I have tried

=AVERAGEIFS(DAYS360(A:A,B:B),A:A,">5/1/2012",A:A,"5/1/2012",A:A,"

View 2 Replies
View Related
Jul 9, 2014

Please find the attached 2010 version excel file <For a given date Time Range average .xlsx>.

I want to calculate the average value (Column C) for the given date (Column A) and given time range (Column B).

Values to be plotted in the color cells yellow and light pink / magenta.

Voting Results.xlsx

View 4 Replies
View Related
Aug 25, 2014

Please find the attached MS Excel 2010 file <average set.xlsx>.

There is set of positive set & negative set of values available in the Column A. The values are plotted against Column A in Column B. Light green are positive sets and light yellow are negative sets.

Now I want to calculate the average for the positive set & negative set of values as shown in light majenta in the cells F4:F9. Also all majenta cells to be plotted by formula.

The Column H and Column I also same as like above , but here negative set of numbers starts first.

View 4 Replies
View Related
Dec 4, 2013

1.jpg

I wan to calculate the average for three cells not in Sequence using AVERAGEIF with condition (VALUE >0)

View 5 Replies
View Related
Feb 11, 2014

I have an excel spread sheet with columns of dates I am trying to get an average formula that counts dates less than a year old as 1 and blank cells and dates greater than a year old as 0 and then gives me a percentage. For example I have a column with 10 dates all less than 1 year old I would get 100% but if I had a column with 8 dates less than a year old and 1 dates older than a year, and 1 blank cell, I would get 80%

Is this possible at all, or do I have to calculate the percentage for each column individually.

View 9 Replies
View Related
Jan 20, 2012

Excel 2010 Higher than past average formula?

Im using Excel 2010 and want to make a formula that will High light the number when it exceeds the past 30 days average. My information is listed vertically in row F..

View 3 Replies
View Related
May 19, 2014

I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.

View 5 Replies
View Related
Mar 8, 2012

I'm using Excel 2010 on a Windows 7 machine.

I have one sheet with a large list of dates and total prices.

I have a second sheet with a list of dates and unit prices.

I want to divide the total price in my first list by the unit price on my second list.

I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.

My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.

View 2 Replies
View Related
May 14, 2014

I have a pivot table and I created a formula that says:

=jobCompletedDate-jobCreatedDate

and so for example, I have

3/31/2014 7:21AM - 3/31/2014 6:33AM

and that difference is giving me: .03367

I'm not sure what this value represents......the difference in dates, converted to ??

View 2 Replies
View Related
Dec 11, 2013

I have 2 columns directly next to each other each containing dates.

Example 1:

F2 = 5/23/13

G2 = 5/23/14

Example 2:

F3 = 6/6/13

G3 = 4/11/14

I wanted to do a conditional formatting that would highlight the cell in

column G if the Month/Day doesn't match the Month/Day in column F

Is there a way to do this with Excel only looking at the Day/Month and ignoring the year??

View 3 Replies
View Related
Apr 7, 2012

I am using 2010 to write some code for a spreadsheet that will be used in 2007, so I know that RepeatLabels is not available.

My question is if you Group a date field by Months and Years and the data spans across 2 or more different years, is there a way to hide months in a specific year? I ask because the Date field has only 12 months in it and if I hide Jan (for example) it hides Jan in both years. (attached pic of filter for Date field below.)

Is there some other way to format it so it can discern between years or do I need to add yet another column to my original data?

View 2 Replies
View Related
Aug 5, 2013

I have a column of Dates in Col B with corresponding X values in Col C. I specify a start date in Cell F14 and an end date in Cell F16. I then use the function shown in cell H6 to identify the starting row number (corresponding to start date) in Cell F6. If I used the same function to identify the end row (in this case 4/2/13), it would choose row 8 which is the first row in which it encounters that date. Unfortunately, I need the end row to identify the last row that date appears in. In this case, that would be row 11.

Excel 2010ABCDEFGHIJKLM1 Date and TimeX2

3/30/201334/1/2013 1:366.9744/1/2013 4:563.95 54/1/2013 4:573.27

Start Row64/1/2013 5:165.553=MATCH(DATE(YEAR(F14),MONTH(F14),DAY(F14)),$B:$B)+174/1/2013 5:172.35

End Row84/2/2013 17:191.59894/2/2013 17:192.81 104/2/2013 17:252.14 114/2/2013 17:262.05 124/3/2013 5:152.84 134/3/2013 5:154.11

Start Row144/3/2013 5:173.2404/01/13154/3/2013 5:173.45

End Row164/3/2013 17:124.0304/02/13174/3/2013 17:133.621819Sheet1

View 7 Replies
View Related
Jan 27, 2014

Code:

tblCluster

Jan-14 Feb-14 Mar-14

Salary 10,000 20,000 30,000

Jan-14

Feb-14

Salary 30,000

I have a table above (in red), as an example, my actual table goes out 60 months.

Where the Green Value is, I need a formula that will reference the two months above it (They could be any of the 60 months), that will then sum the salary from the table between the selected two months (including these months)

I have tried,

Code:

=SUMIFS(C6:BJ6,

tblCluster[[#Headers],[Jan-14]:[Dec-18]],">="&'Cluster Analysis'!$I$51,

tblCluster[[#Headers],[Jan-14]:[Dec-18]],"

View 2 Replies
View Related
Apr 26, 2014

I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).

At the moment I cannot format the axis and minor/major units remain numbers.

I am using Excel 2010 and European date format.

View 2 Replies
View Related
May 28, 2014

I am using Excel 2010, and trying to count the number of times a certain name occurs within a specified date period. The date range start date is manually entered in F7, and the date range end date is manually entered in F8. I need to be able to choose different reporting periods. The answer to this question goes into F3.

I also want to know how many working days (Column D) it takes per name. A working day is Monday-Friday, less public holidays. In this period there have been public holidays from 24 December until 2 January (inclusive), 20 January, 6 February, 18 April, 21 April, and 25 April. I put these dates manually into the worksheet "Holidays".

For the number of times a certain name occurs I tried the COUNTIFS function but keep getting a "zero" value. I used the NETWORKINGDAYS function for the working days and have incorporated the holiday periods. That seems to work OK and I can live with the negative date values showing here.

The really tricky part for me - can I combine the COUNTIFS (assuming it works) and NETWORKINGDAYS functions into a single function to only count the working days of a specific name. As some names have yet to be completed (i.e. there is no data in Column C) how do I not count those? The answer to this question goes into F4.

There will be about 6 of these spreadsheets, and I intend to link all worksheet data into a "master" spreadsheet which automatically updates whenever it is opened. The separate spreadsheets are stored in a document management system rather than a network drive so I can't state a filepath.

View 7 Replies
View Related
Dec 18, 2013

how to calculate the time between two dates in years and quarters (represented in .25 increments). I would round down on the .25 increments (3 months) if not fully surpassed.

See attachment on what it should look like. C2 is my calculated column.

View 4 Replies
View Related
Mar 17, 2014

I'm an Excel newbie using 2010, but have been given a rather daunting task. I have a lot of data organised in a table, something such as:

Column A: Name, Column B: City, Column C: Date Entered

I can obviously filter this table to show the values I need, but I need it to automatically tell me the total amount of people entered per week, per city on a separate worksheet.

I understand I could use a pivot table for some of this, but I want to further automatically manipulate the data once I have the totals (for example, adding a financial value for each, etc) which I'm not certain how to do with a pivot.

So, ideally what I would like is a formula that says total entries in Table 1 that are marked Sheffield in Column B and have a value including or between 01/03/2014 and 07/03/2014 in Column C.

View 3 Replies
View Related
Jun 21, 2011

I have a spreadsheet where we track our contractor's Worker's Comp and General Liability insurance certificate expiration dates. I want the expiration date to highlight in red if it is expired and to highlight in orange if it will expire within 30 days or less.

I have attached a testing sheet similar to what I'm working on. The F column has the dates that need to highlight. I have MS Excel 2010.

View 6 Replies
View Related
Oct 19, 2013

I am working with a 2010 Excel spread sheet and need some direction.

One column has dates in it. Some dates are like dd/mm/yyyy (eg 15/03/1974) and others in the same column are in the following format 14th October 1983.

I need all of the dates to be in the first format (dd/mm/yyyy).

Is there a way to do this without manually changing each field? I have already tried highlighting the column, then clicking the 'numbers' arrow and picking 'date' from the number tab but that didn't work. It's never that easy, is it?

View 14 Replies
View Related
Jul 26, 2012

I've gotten the desired result in Column B, but this will not work going forward as we add to the table in columns E:G .

I'm looking to search between columns E:F, Identify the date-range where my dates in column A belong, and pull the corresponding rate from column G into column B.

Excel 2010

A

B

C

D

[Code]...

View 8 Replies
View Related