I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
In Excel 2013 x64 (EN; CZ locale) I have this funny bug. I work on a large vba project and sometimes when I open it, every cell in every workbook that had default formatting now has this numberformat (shown as "Accounting")
"_-* #,##0.00 [$Kč-405]_-;-* #,##0.00 [$Kč-405]_-;_-* ""-""?? [$Kč-405]_-;_-@_-"
its seems that this formatting is assigned to styles --> Normal and it just messes up everything (pivots, slicers...) and cannot(!) be undone.
I have made some routines to check for this error on workbook.open and workbook.close and I also have file versioning. I check for the error regularly on every worksheet change, but it never comes up, nor does it whenever I close the workbook, so Im having hard time detecting when it occurs.
Sometimes when I try to open the workbook its just all messed up. When I go trough the versions, couple of them back still has the error which means it was already saved with it.
All I could figure out so far is that it sometimes happens when I try to copy some cell and paste it elsewhere (but later it works fine)
I'm 99.9% sure that my code is not causing it by accident or purpose. Now I just found the problem on different workbook that might have been opened at the same time. If you're interested, have a look here [URL] ......
I am a total newb to excel and vb, and only have minimal experience in embedded C.
I have a very large spreadsheet with 9 columns and the max number of rows that excel supports (office 2010).
What I want to do is copy the entire row of data IF a cell in that row contains a specific string I'm interested in.
If it's necessary, the column that contains the values that would trigger a row copy would be column C and the data would be pasted onto a new sheet.
My macro's function is to paste the workdays of an entire month in a specific row of a worksheet. Everything seems to work except using a number to reference the column in which to store the values. I've searched the web for over an hour and found two "solutions":
1. write a function to convert column number to a letter
2. utilize Cells object
#2 seemed more efficient but the function is giving me the error: "Runtime Error: '1004': Method of 'Range' of object "_Worksheet' Failed"
I need CF entire row if column D cells contains formula. All formulas starts with =, so I guess It should be worked around it, but I don't know exactly how. I Use excel 2013.
View 1 Replies View RelatedI am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies View RelatedI have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet.
(I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
Is it possible to copy text from a Excel worksheet and paste it into the custom header or can you just type in the three boxes?
View 1 Replies View RelatedFrom mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I need to make several exact duplicates of an existing worksheet which includes several form controls. Basic Copy/ Paste the worksheet works well but row heights are different and hidden rows are unhidden. Is there a way to make an EXACT duplicate ?
View 2 Replies View RelatedSomeone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
[Code] .....
How do you copy and paste an entire row from and to another excel sheet, with control of where to copy and where to paste.
I have this paste sh_CIF.Cells(sh_CIF_X, "a").EntireRow.Paste
but it is wrong.
I'm using Excel 2013 on Windows 7.
I have an Excel file which has a macro that sucks in data from a number of separate files (two Excel, a varying number of csv). The macro grabs all the individual files and loads them into one of three worksheets with some formatting, sorting, and structuring on the way. All good so far.
I then need to take two of the worksheets and copy them to a new Workbook which I can send out to some users. So I use the Workbooks.Add method, and use the Selection.Copy on just the data (UsedRange.Rows/Columns.Count to ensure it is only the data) and Selection.PasteSpecial with the xlPasteColumnWidths, xlPasteValues, and xlPasteFormats options to copy the data over. None of the data is filtered. Just straight data.
I would expect the newly added workbook to be smaller than the one with the macros because the one with the macros has two extra sheets that I don't transfer, and the sheets I do transfer are identical.
And that's where it gets weird. The file with the macros and more data is 18.7Mb, but the new one with only two sheets is 24.8Mb. One is .xlsm and the other is .xlsx (because it has no macros).
I've tried opening the new workbook and saving as .xlsm (no material difference to the size) and as .xls (it got even bigger). I've opened the new workbook, gone to the end of the data and deleted all the blank rows and columns, but no effect (because the rows are already empty).
Why would the file with less in it be so much bigger (or bigger at all)?
I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Useful information are included !!!
I'll give an example of a record...
Column: BZ, Row: 543 says --> "2110000000-6989000000, 1TOK_TER:17-11-010(25 DAYS LESS),
KATERINA 25 (MANTAS KALNNNNN_HYPERTENSION)1000-150, W:95_105, , HR THE 16wks_US NEFRON OK,
NT OK_B EPIP OK(GOLF BALL)_KAMPILI ORIAKI(DIAITA)_DOPPLER OK, O+,TEST OK(TOX_), , , , , , "
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range)
For Each Cell In Rng
Temp = Temp & Cell.Value & ", "
Next Cell
Temp = Mid(Temp, 1, Len(Temp) - 2)
MyMerge = Temp
End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469.
Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I'm using some workbook-scoped named formulas to define some dynamic ranges which will be referred to by numerous worksheets. The named ranges are defined like:
NAME: gTable_costDetailsEquipment
REFERS TO: =globalParameters!$B$5:INDEX(globalParameters!$B$5:$C$1048576,1+countAdjacentNonBlank
(globalParameters!$B$5,"down"),1+countAdjacentNonBlank(globalParameters!$B$5,"right"))
From either of the tabs "Reports" or "DOR_Template" the user can press the large "+" icon to add a report (which copies the template or the last report to a new sheet).
When this Sheet copy takes place, excel is repeating my named formulas - this time it's making LOCAL versions scoped to the newly made worksheet.
I've used this copy sheet trick before and have never had excel create new, locally scoped, named formula for each workbook level name.
I also just recently started using excel 2013, is this a problem with the new version? I've just never seen this problem, usually workbook-level names are NOT duplicated on sheet copy.
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies View RelatedI have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
I have excel 2013.
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies View RelatedI have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).
What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.
How to copy the content of cells from an excell->sheet1 to an string array
View 2 Replies View RelatedI have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedI am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
View 9 Replies View RelatedIs there a formula which places the date In A5 whenever text is entered in A2 - Excel 2013
View 9 Replies View RelatedI have the following data set with about 500 rows. It has one large value in column A, followed by a number between 1 and 24 in column B.
I am trying in Excel 2013 to develop a formula that will: divide A by the value in cell BPlace in cell C, D, E, F... the result of this division, where the number of times the value is repeated depends on the value in B. E.g.
Example of source values/data set:
A
B
18504
18
2011
2
23694
24
(about 500 rows more)
An example of the output result that I am looking for:
A
B
C
D
E
2011
2
1,005.5
1,005.5
In above example, the value in column B is 2, so the result of the division of value A with value B is repeated twice. In case value B would be 18, the value would be repeated 18 times...
I have been trying to do this in Excel for more than 2 hours, but I did not manage to complete it.
I need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
