Macro To Auto-Copy Entire Row From Master To Worksheet Based On Column Values
May 19, 2014
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1 Column A
1 Name 2 3 Mike 4 Rob 5 Ryan 6 7 Mindy 8 Paul 9 10 Rob 11 12 Mindy 13 Chris
Worksheet2 Column A
1 Name 2 Mike 3 Rob 4 Ryan 5 Mindy 6 Paul 7 Chris 8 9 10 11 12 13
I have been at this for days and i can't quite get it right. I have multiple worksheets of clients all formatted the same. I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet) Under the name I need the text Authorization #: then the data(C3) Under that I need the text Dates of Service Expiration: then the data (D5) Then the text 90801 Balance: then the data from (C30) Then the text 90806 Balance: then the data from (F30) Then the text 90847 Balance: then the data from (I30) Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster() Dim wSheet As Worksheet Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets If UCase(wSheet.Name) <> "MASTER" Then With wSheet .Range("I1").Copy _ Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1) 'More Copy Method code here End With End If Next wSheet End Sub...
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
I am trying to apply a conditional format to an entire row based on the presence of any value in the first cell of that row to format to a certain color. If there isn't something present in the first cell, I don't want it to change.
Everything I keep trying ends up highlighting the entire workbook.
I would like to apply the rule to the entire sheet but only have it highlight the rows which have a value/text in the first cell of each row.
I am assuming I should use the formulas selection for conditional formatting but I'm unsure of what formula would apply to this type of request.
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
Certain job descriptions require certain training. Drivers needs these two particular trainings and an office employee only needs that training...
I have a reference sheet with what trainings are required for what job. I then want the next chart with each employee name and subsequent job title to have the required trainings automatically checked. (I can take care of the conditional formatting after that).
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
attached is the template that im working on right now. the worksheet which is named as "1" has a command button when clicked on it would create another worksheet named as "2", now i need to collate the information in to a master sheet which i have named as "daily report". All im in need is to copy data from every worksheet and post the same in the daily report using a Macro code.
iam able to do the same using the following for one row (1.1 to 1.5) of values which repeats only once for the first worksheet and doesnt repeat next time for worksheet 2 and so on. I want to have the values for 1 to 10 in the daily report. Can someone help me?[/color]
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A B C D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
I have a worksheet (will be the last worksheet) that I want to use as a template for further worksheets.
I want the user to be able to run a macro (?) and copy the entire worksheet and then insert it to the right of all the worksheets as many times as needed.
I've a worksheet where I maintain the IT tickets that I handle. Whenever, the I column is updated with Implemented/Closed, the entire row should be copied to a new worksheet.
I've tried with other VBA scripts provided, but was not success with the same.
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Sub Combine()
Fpath = "C: emp2" ' change to suit your directory Fname = Dir(FilePth & "*.xls")
Do While Fname <> "" Workbooks.Open Fpath & Fname Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count) Workbooks(Fname).Close SaveChanges:=False Fname = Dir Loop
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet. (I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
I have a multi-worksheet spreadsheet in excel 2003. I want to produce a macro that will just save a copy of the front worksheet values only. That is I don't want to save any formulas or any of the hidden worksheets, just the front page report, plus it's formatting/layout.
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
I have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
way to copy the entire row of data from one worksheet into another, within the same workbook, based on the criteria "Responsible." Here is a sample of the data: ..
