I have two userform one if useing the getopenfilename to popluate a listbox. and then i use these listbox item withen this code to copy the files into a new folder. This works ok.
Then i copy a program into the same folder jpegresize.exe this program makes resized images of all files in its directory. by defult this program should only deal with these files. though what is happening is instead of using the files in the new folder it running on the files where the originals where copied from. (hope that makes sence). Though if i run jpegresize.exe from the new folder or command prompt it. It runs like it should. So i cant figure it out is there somethink the the shell and wait is passing that it shouldnt be.
Is it possible to write a macro that can import VBA code in a text file then execute it? I need this functionality as I have produced a corporate spreadsheet template that goes out to many people and I will need to be able to update it as requirements change once it has been distributed. So my idea was to build a macro in the template that has the code in it to import the "update code" from a text file that I would send to all the folks that have the template. If the template was centralized, that would save me from this issue but it is however going to be distributed widely.
I have to run a report each morning and in once cell I need to pull in the contents of another cell from another worksheet. I'd rather not have to open the additional file each morning to copy and paste special the values so I'd like to add to my current macro to pull this data in automatically. I have to do this for two different reports/portfolios and the data I am pulling in for each portfolio is located in the same exel file but under two different tab names, the portfolio names 2010 and 2045.
Deliverables The spreadsheet I am pulling data in from is located here: K:Risk OversightMarket RiskTracking ErrorBARRA and the file name is: Daily Barra Tracking Error.xls
Tab name would be 2010 for the 2010 portfolio or 2045 for the 2045 portfolio The vlookup will be from "A32:B2500" and I would like to incorpoprate an IFERROR function that returns "" in the event of an error. Column "A" are dates and column "B" is the data I need to pull in.
Receivables I am pulling the data into cell "J23" of a summary report (sheet 2) and would like the vlookup to read something like this:
IFERROR(VLOOKUP("K1"Active.Workbook.Sheets2,[K:Risk OversightMarket RiskTracking ErrorBARRA"&"Daily Barra Tracking Error.xls"(Sheets)]."2010""A32:B2500",2,0),"")
This should return a blank cell if the date cannot be found in the data spreadsheet and return the correct data for teh correct date being referenced in my summary sheet.
how to do the bracketed parts for pulling in the right spreadsheet and tab.
This is a sample of the data with which I am working. I know that a macro can do what I need, but I am only versed in Excel formulas and not that much programming. I need to be able to first sort the data by Column C ("Element Type"), then by Columns E, F, G ("Year", "Month", "Day"). Then, I need to be able to copy all rows that have the same "Element Type" and "Year" to a new file, using the same header from the original spreadsheet on each new spreadsheet - doing this multiple times until the end of the file is reached.
Ideally, the new files would have a strict naming convention: XXXXXX-ZZZZ (YYYY).xls, where the X's are the value of the "COOP Station ID" in Column A, the Z's are the "Element Type" from Column C, and the Y's are the "Year" from Column E. If this theoretical macro were run with the Sample Data file I provided, it should result in the creation of five new workbooks. Is there a way to write a macro to do this, or at least something similar
I have csv files auto generated (with date stamp in name) and saved in a specific folder everyday. I need to find a macro that will copy the row(s) every day and add to the next empty row in the master excel file. Some days the csv file may have a single row of data and on some other days it may have multiple rows of data to copy and paste.
I have certain excel file that i want to be able to write a macro in order for it to extract certain information from certain cells on different sheet. In other words, i want cell A2 from each of the three different worksheet i have under different files. And have those data automatically update a master excel or access file whichever might be easier.
Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1() Dim fs As Object Dim oldPath As String, newPath As String oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save Set fs = CreateObject("Scripting.FileSystemObject") fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls" Set fs = Nothing End Sub
I already have code that I believe is supposed to do what I'm trying to accomplish. However, it doesn't fully work. The Macro is below:
VB: Workbooks.Open Filename:="C:Documents and Settingsplp138DesktopExample 1.xls" On Error Resume Next With Workbooks("Example 2.xls")[code]....
Basically, what I'm trying to accomplish is to have a certain range from one file copied, and pasted in the next available (empty) row of another file. While debugging I see that everything is working except for the actual pasting.
I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents. ex:
file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--
Is there an easy way to automatically copy data from 1 Excel spreadsheet to another when the data is slightly out of order? Currently an admin copies and pastes from file 1 to file 2 manually. There are approximately 800 names to copy. It would be ideal to type a command or press a key and have file 2 updated automatically. Is there a feasible way to accomplish this without spending a lot of money or time?
file 1 file 2
john 100 john 100 june 200 lance 50 marie 150 june 75 stan 100 marie 125 phone 50 stan 200 hold 25
In the example above, if lance doesn't appear in file 1 his amount doesn't get copied and his 50 remains the same. The amounts do not get added, just pasted over from file 1 to file 2 with the days sales results. Only the names on file 2 get pasted over. Phone and hold amounts in file 1 are ignored.
ToPath = "C:Documents and Settings" & Environ("UserName") & "Desktop"
With Application.FileSearch .LookIn = ToPath .FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
Sheets("Sheet2").Range("A1:A65536").ClearContents
For i = 1 To .FoundFiles.Count tempbuf = .FoundFiles(i) tempbuf = Mid(tempbuf, InStrRev(tempbuf, "") + 1, 255) Sheets("Sheet2").Range("A1").Offset(i, 0).Value = tempbuf Next i
Else Exit Sub
it exits the sub which apparently means .Execute is not > to 0.
So my question is, what does the line If .Execute() > 0 checks?
I am 101% sure that there are pdf files under the ToPath folder.
I'm using code from the Ozgrid page: http://www.ozgrid.com/VBA/loop-through.htm
However, once I get to the if statement If .Execute > 0... it does not contain a value. The folder contains 16 files in it, but .Execute does not recognize any of them. Is there a specific library or call that I'm missing??
I've been battling this for sooo long, I just dont know what to do with it.
Using Excel 2003 with WinXP. I'm trying to run macro code automatically whenever time = 9:30:01 (or whatever time I pick) for a stock market trading program, which is why the exact time matters so much. I've been able to get the time to update fine, but unless I click on the worksheet while the time condition is TRUE then my code doesn't run. The time actually is sent to me from the stock data provider and it shows up in a cell as a constantly updating value.
I've tried using the Workbook_SheetChange function and OnTime method, but without luck.
In both cases, unless I activate the sheet the code doesn't run. By activate, I mean that I have to click on the sheet when the values that trigger the code to run would be true. If I do that it works just fine, but sitting around and clicking on a worksheet defeats the purpose of automation. Since I'm trading stocks this has to be very exact, so I can't trust a macro scheduler to do this.
The code further below is what I'm trying to get to run. The time value is in cell L1. In cell L2 I have the following
I have turned a Workbook with Macros into an add-in. The macros work perfectly for the intended purpose: copy selected data in a special way and put it into an e-Mail message.
I used the CustomUI Editor to assign a macro to a Ribbon button.
However, when I turn it into an add-in and click the Ribbon button, it doesn't work on my machine or any other machine, with an error that says "Cannot run the macro 'CreateListofInventory'. The macro may not be available in this workbork or all macros may be disabled.
My macros are not disabled, and the add-in doesn't even work in the book where the macros reside.
How do I have a workbook execute VBA code when I hit 'Enter' anywhere on a specific sheet? I don't need the code to execute when I hit 'Enter' on any of the other sheets in the workbook, just a specific sheet.
I have this very simple code below that I use to delete a row if its marked as 'false' in column M. This works quite well, but I want to expand it. I use this in a workbook that can have name different sheet names in a month, and I want it to automatically go through all the sheets and do this...except for 2 sheets named addressess and sheet1. Is there something I can add to this macro that will loop through all the other sheet names (regardless of name) and execute this?
Sub DelRow() With ActiveSheet .AutoFilterMode = False With Range("m1", Range("m" & Rows.Count).End(xlUp)) .AutoFilter 1, "false" On Error Resume Next .Offset(1).SpecialCells(12).EntireRow.Delete End With .AutoFilterMode = False End With End Sub
Assume a cell -- say A1 -- has a long formula in it. If I select A1, press F2 to "Enter" the cell, then I have a blinking 'l' indicating the cursor/pointer position WITHIN the cell.
Is there any way to control the position of the blinking 'l' (or whatever it is called)? For instance, in a long formula, I would like to write a macro which could transport the blinking 'l' to midway into the formula string.
Alternatively, can I make a partial selection WITHIN a cell and run a macro on it. For instance, if cell B1 has a heading "Dec 2007" and I highlight just the "Dec" portion of the string, I would like to execute a macro to color it red. I have a simple macro that can do it to the entire cell, but not to only part of the cell contents. Is there any way for VBA to be active when I am WITHIN a cell.
Sub Font_Red() 'will add red color to ActiveCell font Selection.Font.ColorIndex = 3 End Sub
Sub test2col() Sheets("Sheet6").Cells.ClearContents Sheets("Sheet6").Range("A:B").Value = Sheets("Sheet1").Range("A:B").Value Sheets("Sheet6").Range("D").Value = Sheets("Sheet1").Range("C").Value End Sub It said
Sheets("Sheet6").Range("D").Value = Sheets("Sheet1").Range("C").Value End Sub has error.
Does a Sub not support to use Range more than one time? If so, do I need to write many Sub to do it?
When the next empty cell in column A is selected, add a formula in the same row, column H. I'm not sure on how to hard code this and used the offset instead. So maybe instead of offsetting, i should/could change the references? However, as it is, it also adds the formla in column H when column G is selected and data is entered. I cant recreate this with any other column though.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Target.Cells.Count > 1 Then Exit Sub If Not Intersect(Target, Range("A5:A65000")) Is Nothing Then If ActiveCell.Offset(-1, 0) = " r " Then If ActiveCell.Offset(0, 7) = "" Then ActiveCell.Offset(0, 7).Formula = "=if(RC[-1]="""","""",RC[-1]+120)" Exit Sub End If End If If ActiveCell.Offset(-1, 0) = "" Then MsgBox "Please select the next empty cell/row!" Exit Sub End If If ActiveCell.Offset(0, 7) = "" Then ActiveCell.Offset(0, 7).Formula = "=if(RC[-1]="""","""",RC[-1]+120)" End If End If End Sub
Is is possible to have a button or a box of some sort that the user of a spreadsheet can click to execute a piece of vba code that I have? If so, can someone tell me how to insert such a button?
I'm doing a function to comprobate that a cell value has 11 digits. I'm not use only a validation because the the cell value can start with a 0. So I make this function
'This function is to get all the characters from a cell Function ValidaSeguro(SS As String) As Boolean Dim strArray() As String Dim lLoop As Long, lCount As Long Dim Respuesta As Integer lCount = Len(SS) If lCount <> 11 Then ValidaSeguro = False Respuesta = MsgBox("Don't have 11 digits") Exit Function End If Redim strArray(lCount - 1) For lLoop = 0 To lCount - 1.........................
