Worksheet_SelectionChange - Execute Error
Jun 12, 2006
When the next empty cell in column A is selected, add a formula in the same row, column H. I'm not sure on how to hard code this and used the offset instead. So maybe instead of offsetting, i should/could change the references? However, as it is, it also adds the formla in column H when column G is selected and data is entered. I cant recreate this with any other column though.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A5:A65000")) Is Nothing Then
If ActiveCell.Offset(-1, 0) = " r " Then
If ActiveCell.Offset(0, 7) = "" Then
ActiveCell.Offset(0, 7).Formula = "=if(RC[-1]="""","""",RC[-1]+120)"
Exit Sub
End If
End If
If ActiveCell.Offset(-1, 0) = "" Then
MsgBox "Please select the next empty cell/row!"
Exit Sub
End If
If ActiveCell.Offset(0, 7) = "" Then
ActiveCell.Offset(0, 7).Formula = "=if(RC[-1]="""","""",RC[-1]+120)"
End If
End If
End Sub
View 2 Replies
ADVERTISEMENT
Jan 27, 2009
I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
View 3 Replies
View Related
Feb 28, 2014
I have the following code:
[Code] .......
What do I need to change in order to make it execute the Call statement on EVERY item in the ListBox2, not the Selections.
View 3 Replies
View Related
Jul 4, 2006
I have written the following code which will use "U10" to divide by 12, & put the results on "H10.S10" if "U10 is not empty.
The results work fine except that if I delete the value in "U10", the formula "= sum($U$10/12)" will remain in H10.S10, if there any way that this formula do not remain in H10.S10?
Because this code should work from row 10 to row 47, like to ask how to write in short vba code instead of repeating the code with the need to change the row number?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("U10").value <> "" Then _
Range("H10.S10").value = "=sum($U$10/12)"
End Sub
View 9 Replies
View Related
Apr 27, 2007
Is it possible to have two Worksheet_SelectionChange events for the same worksheet if so how. If not what options do i have?
View 3 Replies
View Related
Jan 6, 2008
I found this code on one of my many searches, that works great.
(can't remember where I got it or who wrote it, (My deepest apoligies to the author))
Public pRule
Sub butRulerToggle_Click()
pRule = Not pRule
Selection.Select
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If pRule Then
For Each aCell In ActiveSheet.UsedRange
If aCell.Interior.ColorIndex = 27 Then aCell.Interior.ColorIndex = xlNone
Next
On Error Resume Next
For Each aCell In Application.Intersect(ActiveCell.EntireRow.Cells, ActiveSheet.UsedRange)
If aCell.Interior.ColorIndex = xlNone Then aCell.Interior.ColorIndex = 27
Next
End If
End Sub
My question:
This works in a sheet module. How can I put it in the This Workbook module so it works on all sheets.
By the way, what this does is highlight the whole row on a clik of a cell, leaving any color formating that was initially there alone.
Very useful if you are looking at say A10 and then want to look at Z10 without losing focus on the row.
View 9 Replies
View Related
Sep 19, 2008
I have popped the code below in the worksheet and it will not work on my machine (Vista + Office 2003). However, it works fine on my colleagues machine (XP + 2003).
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column < 4 Then GoTo usevalue
On Error Resume Next 'MUST reenable events...
Application.EnableEvents = False
ActiveCell.Offset(1, 1 - Target.Column).Select
Application.EnableEvents = True
usevalue:
ActiveCell.Copy 'Put value into clipboard (marching ants)
ActiveCell.Interior.ColorIndex = 36
End Sub
I have tried different code from different web sources on different fresh files. This includes the Worksheet_Activate() function.
My macro security setting are low.
View 9 Replies
View Related
Nov 21, 2003
Worksheet_SelectionChange(ByVal Target As Range)
from executiing each time i like to execute
Worksheet_BeforeRightClick(ByVal Target As Range, Cancel As Boolean)
View 9 Replies
View Related
Apr 27, 2007
I have this code that will update column "AW8:AW60" when a date is entered into"z8:z60" if column"c8:c60" equals 4. It works great if the c column doesnt change if it does it doesnt recaluate. What I need it to do is if the number in "c8:c60" changes it recaulates.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim msgg As String
Dim msgg2 As String
Dim NewDate1 As Date
Dim c1 As Range
If Not Intersect(Target, Range("z8:z60")) Is Nothing Then
msgg = InputBox("Please Enter A Date..." & vbLf & vbLf & "(MM/DD/YY)")
If msgg = vbNullString Or Not IsDate(msgg) Then
MsgBox "You Did Not Enter Date!", vbCritical
With Target
View 7 Replies
View Related
Jul 13, 2007
The attached file receives information from another program in cells A2:D2. It then carries out a copy/pastespecial, and then does a copy insert. The script is supposed to update when new data enters the cell, however it keep adding an additional null line. Does anyone know why this is or how to fix it?
View 2 Replies
View Related
Aug 22, 2008
I have some code which enables new comments to be added when a user double clicks a cell, but I want to restrict this to a specific range B5:B125. How do I change the code to reflect this, and add the current Date to new comments added. Here is the first section of the code which sets the range etc...
Option Explicit
Public oldRange As Range
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
On Error Resume Next
Dim rng As Range
Set rng = Target(1, 1)
oldRange.Comment.Visible = False
With rng
If Not .Comment Is Nothing Then
If .Comment.Visible = False Then
.Comment.Visible = True
Else
.Comment.Visible = False
End If
End If
End With
Set oldRange = Target(1, 1)
End Sub....
View 4 Replies
View Related
May 19, 2009
Excel 2003, Windows XP SP3
I cannot solve problem 1, thus I tried workarounds, however there are also problems with them (problem 2, problem 3). I do not use .activate or .select in my code. I have recreated the problem in sample workbook.
Problem 1:
I get a blink when I call another sub from Worksheet_SelectionChange event.
Event is located in Sheet module, CellChange procedure - in seperate module
Sample ...
View 9 Replies
View Related
Apr 17, 2009
I have below as part of my
Dim ToPath As String
ToPath = "C:Documents and Settings" & Environ("UserName") & "Desktop"
With Application.FileSearch
.LookIn = ToPath
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
Sheets("Sheet2").Range("A1:A65536").ClearContents
For i = 1 To .FoundFiles.Count
tempbuf = .FoundFiles(i)
tempbuf = Mid(tempbuf, InStrRev(tempbuf, "") + 1, 255)
Sheets("Sheet2").Range("A1").Offset(i, 0).Value = tempbuf
Next i
Else
Exit Sub
it exits the sub which apparently means .Execute is not > to 0.
So my question is, what does the line If .Execute() > 0 checks?
I am 101% sure that there are pdf files under the ToPath folder.
View 9 Replies
View Related
Feb 13, 2007
I'm using code from the Ozgrid page: http://www.ozgrid.com/VBA/loop-through.htm
However, once I get to the if statement If .Execute > 0... it does not contain a value. The folder contains 16 files in it, but .Execute does not recognize any of them. Is there a specific library or call that I'm missing??
I've been battling this for sooo long, I just dont know what to do with it.
View 9 Replies
View Related
Dec 27, 2008
Using Excel 2003 with WinXP. I'm trying to run macro code automatically whenever time = 9:30:01 (or whatever time I pick) for a stock market trading program, which is why the exact time matters so much. I've been able to get the time to update fine, but unless I click on the worksheet while the time condition is TRUE then my code doesn't run. The time actually is sent to me from the stock data provider and it shows up in a cell as a constantly updating value.
I've tried using the Workbook_SheetChange function and OnTime method, but without luck.
In both cases, unless I activate the sheet the code doesn't run. By activate, I mean that I have to click on the sheet when the values that trigger the code to run would be true. If I do that it works just fine, but sitting around and clicking on a worksheet defeats the purpose of automation. Since I'm trading stocks this has to be very exact, so I can't trust a macro scheduler to do this.
The code further below is what I'm trying to get to run. The time value is in cell L1. In cell L2 I have the following
View 9 Replies
View Related
Feb 24, 2014
Attachment 299651
I have turned a Workbook with Macros into an add-in. The macros work perfectly for the intended purpose: copy selected data in a special way and put it into an e-Mail message.
I used the CustomUI Editor to assign a macro to a Ribbon button.
However, when I turn it into an add-in and click the Ribbon button, it doesn't work on my machine or any other machine, with an error that says "Cannot run the macro 'CreateListofInventory'. The macro may not be available in this workbork or all macros may be disabled.
My macros are not disabled, and the add-in doesn't even work in the book where the macros reside.
View 2 Replies
View Related
Sep 25, 2009
I have two userform one if useing the getopenfilename to popluate a listbox. and then i use these listbox item withen this code to copy the files into a new folder. This works ok.
Then i copy a program into the same folder jpegresize.exe this program makes resized images of all files in its directory. by defult this program should only deal with these files. though what is happening is instead of using the files in the new folder it running on the files where the originals where copied from. (hope that makes sence). Though if i run jpegresize.exe from the new folder or command prompt it. It runs like it should. So i cant figure it out is there somethink the the shell and wait is passing that it shouldnt be.
View 3 Replies
View Related
Oct 15, 2009
I would like to execute a sub when the workbook is saved, what is the procedure for this.
View 3 Replies
View Related
Nov 6, 2009
How do I have a workbook execute VBA code when I hit 'Enter' anywhere on a specific sheet? I don't need the code to execute when I hit 'Enter' on any of the other sheets in the workbook, just a specific sheet.
View 11 Replies
View Related
Jan 13, 2010
I coudn't find anything on this forum on this subject.
Is there a way to execute [trigger] a macro from within a formula?
e.g. Based on an IF statement result, execute macro1 if true or macro 2 if false?
modytrane
View 7 Replies
View Related
Feb 3, 2003
I need a macro that will execute the F2 function key so that the cell can be edited.
View 7 Replies
View Related
Nov 19, 2011
I have this very simple code below that I use to delete a row if its marked as 'false' in column M. This works quite well, but I want to expand it. I use this in a workbook that can have name different sheet names in a month, and I want it to automatically go through all the sheets and do this...except for 2 sheets named addressess and sheet1. Is there something I can add to this macro that will loop through all the other sheet names (regardless of name) and execute this?
Sub DelRow()
With ActiveSheet
.AutoFilterMode = False
With Range("m1", Range("m" & Rows.Count).End(xlUp))
.AutoFilter 1, "false"
On Error Resume Next
.Offset(1).SpecialCells(12).EntireRow.Delete
End With
.AutoFilterMode = False
End With
End Sub
View 2 Replies
View Related
Jan 4, 2008
Assume a cell -- say A1 -- has a long formula in it. If I select A1, press F2 to "Enter" the cell, then I have a blinking 'l' indicating the cursor/pointer position WITHIN the cell.
Is there any way to control the position of the blinking 'l' (or whatever it is called)? For instance, in a long formula, I would like to write a macro which could transport the blinking 'l' to midway into the formula string.
Alternatively, can I make a partial selection WITHIN a cell and run a macro on it. For instance, if cell B1 has a heading "Dec 2007" and I highlight just the "Dec" portion of the string, I would like to execute a macro to color it red. I have a simple macro that can do it to the entire cell, but not to only part of the cell contents. Is there any way for VBA to be active when I am WITHIN a cell.
Sub Font_Red()
'will add red color to ActiveCell font
Selection.Font.ColorIndex = 3
End Sub
View 9 Replies
View Related
Jun 17, 2008
I tried the following code but it shows an error:
Sub test2col()
Sheets("Sheet6").Cells.ClearContents
Sheets("Sheet6").Range("A:B").Value = Sheets("Sheet1").Range("A:B").Value
Sheets("Sheet6").Range("D").Value = Sheets("Sheet1").Range("C").Value
End Sub
It said
Sheets("Sheet6").Range("D").Value = Sheets("Sheet1").Range("C").Value
End Sub
has error.
Does a Sub not support to use Range more than one time? If so, do I need to write many Sub to do it?
View 11 Replies
View Related
May 18, 2009
How do I let a macro execute a certain key strok combination, such as Alt, D, G, H?
(Didn't really know what to search for...)
View 9 Replies
View Related
Sep 26, 2006
I need to create a batchfile from data retrieved from an excel spreadsheet.
1. I have 30 pre-select users on a list with their phone numbers and want to create checkboxes on each user to be selected.
2. Selected users will then be included in a batchfile to execute but only the corresponding phone numbers will be used.
3. Probably need to use a form for it to be user-friendly...i guess.
e.g. batchfile.bat
@ECHO OFF
::Location of the executable file:example.exe
d:
::CLI of utility
example 32165487 -tsve -g<ip> <msg>
example 45679821 -tsve -g<ip> <msg>
example 16543248 -tsve -g<ip> <msg>
View 9 Replies
View Related
Oct 29, 2006
Is is possible to have a button or a box of some sort that the user of a spreadsheet can click to execute a piece of vba code that I have? If so, can someone tell me how to insert such a button?
View 2 Replies
View Related
Oct 31, 2006
I'm doing a function to comprobate that a cell value has 11 digits. I'm not use only a validation because the the cell value can start with a 0. So I make this function
'This function is to get all the characters from a cell
Function ValidaSeguro(SS As String) As Boolean
Dim strArray() As String
Dim lLoop As Long, lCount As Long
Dim Respuesta As Integer
lCount = Len(SS)
If lCount <> 11 Then
ValidaSeguro = False
Respuesta = MsgBox("Don't have 11 digits")
Exit Function
End If
Redim strArray(lCount - 1)
For lLoop = 0 To lCount - 1.........................
View 4 Replies
View Related
Nov 20, 2006
I'm having a problem with negative values. Somehow if the pitchX is -11.1877, let's say, and it is the right value, the code will still perform the 2nd if statement, when it should not. Am I using the wrong data type? Or is there anything I'm missing out?
Dim pitchX As Double
If pitchX > 10000 Then
pitchX = pitchX / 1000
End If
If pitchX <> Range("C8").Value Then
With Range("C8")
.Font.Bold = True
End With
End If
View 6 Replies
View Related
Mar 14, 2007
i have columnar text that is organized by catagory and sub-catagory. what i would like to do is have a macro to hide/unhide rows containing text under sub-catagories by clicking on the sub-catagory and hide/unhide rows containing sub-catagories by clicking on the catagories.
I'm looking for a way to execute macros to hide/unhide rows according to catagory/sub-catagory and for this macro executer to hide/unhide as needed.
View 6 Replies
View Related
