We're doing a "Biggest Loser" competition at work. I have a spreadsheet that calculates the % of body weight lost. I need a formula that will look at the results and display 1st, 2nd, 3rd places. Here is this weeks results...
View 2 RepliesI have a sheet that lists all of the suppliers that we use (A2:A10). I have code that pulls the total number of reject by month for each supplier (C2:C10). What I would like is a formula that takes those values for the supplier and places them next to each other in columns E (see E2:E6) and does the same with the total reject values next to the applicable supplier (see F2:F6) without all of the zeros.
I think it is some kind of index and match function but cannot figure it out. I have attached an example of what I am trying to achieve.
Also, if at all possible, I would like to know if there is a way to auto populate a chart with those values and not the blanks that are generated (row 7 down in my example) so that my chart does not contain a bunch of blank space.
I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.
I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies View RelatedI have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
What I have is a long list of about 100 items. I would like to set up an excel sheet that allows me to place checkboxes in each row and then whatever checkboxes have been checked, to simply collate and print out ONLY the check boxes that have been checked.
I have gotten as far as to create and rename the checkboxes but my skill ends there. I also need to know how to get each checkbox to correspond to a row.
I appreciate ANY help that you can give me.
EDIT: this doesnt NEED to be checkboxes, it can be optionbuttons if that is easier... simply something to select/deselect and print.
1.1 a blah
1.1 b blah
2.1 a blah
2.1b blah
3.1a blah
3.1b blah
3.3.a blah
etc blah
etc
I have created a excel spread sheet to be set up like a schedule, including multiple macros through the sheet, when I started it put the macros into "Module 1", now if I wanted to use this same worksheet and copy it and create multiple sheets in one file via the tabs does it make a difference where the macros reside? if it remains in "Module 1" it will only be in one spot will this create problems later on or should the each reside in the sheet objects.
View 9 Replies View RelatedHow do I do this?
View 3 Replies View RelatedI am trying to figure out how to insert a decimal into a number. For ex: 1234 to become 12.34. I tried creating custom or special formatting but I cannot figure it out.
View 3 Replies View Relatedhow to control this,it should be 0.55. is they a wat too round off too next highest hole number? Here is a example.
View 2 Replies View RelatedThe code below writes the names of all active worksheets into the A column of the active worksheet. I have a situation where I have 2 workbooks open (3 if you count PERSONAL.XLS). One of the worksheets has a consistent name, the other has a name that changes every week (not in a consistent pattern).
I'd like to be able to use the routine below to get a list of open workbooks, ignore the one I'm working in and PERSONAL.XLS, and instead put the remaining filename into other Private Subs in a User Form to run other routines.
Spreadsheet 1: So in column "A" I have all of the dates written out. Then i need column "B" to put the appropriate name next to the date that person chose in spreadsheet 1.
Spreadsheet 2: I have a live form that feeds data into a different spreadsheet.
I am using google spreadsheets.... The formulas are the same as in excel
I need to place cell value into one function (I cannot modify this function it is built in) .
For example:
Function is
CODE
A2=KGF
=ABCDFE_(my value of A2 thus KGF)_GHIJKL
Thus the end result:
=ABCDFE_KGF_GHIJKL
I can concatenate the string but I cannot evaluate it .
=CONCATENATE("ABCDFE_",A2,"_GHIJKL")
is there a way to do it ?
I have a column of percentages where I only want to show 1 decimal place if the value is less than 1%. The rest of the percentages I want without decimal detail.
I've tried custom formats and cant quiet get it right. Am I close with this?
[>1]#.#%;###%
We currently have a macro that has a limitation that it only works on 8 sizes, and only upto 12 Colours. We want to change this to make the number of sizes and colours totally variable. how to change this bit of code below so that the cells selected are not fixed but are variable depending on the number of sizes and colours as entered in sheet 2.
Current Code for When 8 Sizes and 12 Colours
Code:
Sheets("Sheet2").Select
Range("B30").Select ' This is Fixed
Selection.Copy
Sheets("Sheet3").Select
Range("G2:G109").Select ' Want this to be variable based on the number of rows needed starting at G2, this can be found out from Sheet2, Cell G28
ActiveSheet.Paste
[code]...
On Sheet 2 Cells G23 is used to enter number of Sizes, and G24 is used to enter number of colours. Cells G25, G27 and G28 then have formulas to work out other values that will be needed in the macro.
I'm trying to copy a worksheet and place it at the end. I will rename it afterwards. I'm using the following code but it doesn't work.
Private Sub Copy_sheet()
Dim wbk As Workbook
Dim wsh As Worksheet
Set wbk = ActiveWorkbook
wbk.Worksheets("Template").copy After:=wbk.Worksheets(wbk.Worksheets.Count)
Set wsh = wbk.Worksheets(wbk.Worksheets.Count)
wsh.Name = "New Sheet"
End Sub
Is it possible to place Text in a Cell if a CF is True?
So Far I am unsuccessful.
I have this CF in Column S
=IF(ISBLANK(R10346),"Need Dept & Cat")
I have the value 26.06 in cell A1, I want to have everything left of the decimal place in Cell B1 and everything right of the decimal place in Cell C1, is this possible. Bearing in mind A1 will be variable (ie it could be 159.65).
View 9 Replies View RelatedNot using VBA is there a way to take the worksheet name and place it in a cell?
is it possible to place time in a textbox on a userform?
I am trying to make 5 textboxes to display different time zones.
I use Excel 2002 - I have a column with Text in its cells. The cells usually range from 30 to 130 characters including spaces. I need to use word wrap.
I would like to be able to see where the 55th character is ( Including spaces ) - but I also need to see the rest of the contents of the text in the cell.
I have thought about coloring the first 55 character/spaces ?
or inserting a character at space 56 ? Example below
XXXX XXX XXX
XX XXXXX XXX
XX XXXX XXXX
XXXX XXX XXX
XXX XX~XXX X
XXXX XX
I have a spreadsheet where I have the first and last name in two separate columns. In the same spreadsheet, I have a column where there is an Email Convention. The email convention can change from row to row. Is there a way to take the first and last name columns and make it format according to the email convention column. For are some samples.
First Name Last Name Email Convention
Ada Smith @mail.uch.org
Ann Blanc _@chs.net
Bob Jones .@halifax.org
I currenlty have a spreadsheet that works well but uses a lot of array formulas and, therefore, is running VERY slowly. The slow speed makes it impractical to work with, so I am trying to replace the array approach with the DMIN function. However, I am having trouble getting the DMIN function to find the minimum value in a column range according to a criteria in the same arrays did for rows.
Here is my problem:
I currently have arrays (composed of dates) in rows and I have converted this to non-array columns. I have pasted a sample of the new worksheet below.
Column D ["Original End"] has dates that are static. Column F ["New Start"] has dates that can change according to user inputs. I want Column G to find the date in a Column D that is greater than the date in Column F in the same row.
In the table below, you can see that I was able to get this to work for cell G3; however, when I pull the formula down, it stops working. Here is the formula I have in cell G3: =DMIN($B$2:$E$15,"End",$I$2:J3).
Conceptually, I want to write the following function in cell G4: =DMIN($B$2:$E$15,"End",">"&F4), where the criteria is 'greater than date in F4' - but this obviously doesn't work.
I'm trying to simplify a section of my code by naming a long string that is repeated. I tried by simply place the Name before equal sign (=) and also putting Set before the name. Both failed though I've seen both methods used successfully in other code. Am I having a syntax issue of some sort?
Private Sub ConditionalRowDelete()
Dim NumRows, iLine As Integer
ActiveSheet.UsedRange.Select
NumRows = ActiveSheet.UsedRange.Rows.Count
Dim CircuitType As Range
Set CircuitType = Range("C" & iLine).Value
For iLine = NumRows To 2 Step -1
If Range("A" & iLine).Value > "6999" Then
Rows(iLine).EntireRow.Delete
End If
Next iLine
For iLine = NumRows To 2 Step -1
If CircuitType = "VOIP" Or CircuitType = "Customer Care" Or CircuitType = "Dialup" Or CircuitType = "IRU" Then
Rows(iLine).EntireRow.Delete
End If
Next iLine
End Sub
I was wondering if anyone knows code that will check to see if there is a certain value in a cell, and if there is place a "1" in another cell in that row.
View 2 Replies View RelatedI'm in the process of debugging some code at the moment and so have removed the On Error Resume Next's that I had in there.
I've since gotten rid of this where it wasn't necessary, but I have a general question about using the ShowAllData method with Advanced filter.
When I use:
ActiveSheet.ShowAllData
when there is no advanced filter applied, I get an error saying the method of Worksheet class failed.
I have searched and cannot find a way to check in VBA if there are advanced filters applied, though I can find code that will check if AutoFilters are applied. This doesn't work with AdvancedFilters.
I am wanting to put a "1" in ROW 2, starting with COLUMN B until the sum reaches the value in cell A3.
Example: I have 10 in A3, I would like the macro to place a "1" in B2-K2.
I have a column that has dates in it in this format:
Friday 07/03/2014
Friday 07/03/2014
Friday 07/03/2014
Friday 07/03/2014
Saturday 08/03/14
Saturday 08/03/14
It lives on Google Docs as well, there are multiple people putting dates in and sometimes people will use just CAPS for the day name.
What I would like to achieve is that if someone puts another Friday 07/03/2014 under the Saturdays in the list, I want it to automatically sort itself under the Friday 07/03/2014 ones.
Whole row would need to move those spots up, not just the one cell.
I am completely stumped and spent over 20 hours trying to figure out this problem. There are a ton of examples on the net on how to do this using code, not using code, etc. I have attached the sample of what I have been able to do so far.
In this example I have used the non code approach. Using Name Lists to assign pictures, I was able to get this to work, the problem is that I would have to create hundreds of name lists to get it to work on all cells, unless I'm missing something.
If you look at Column C - I basically want to assign a picture instead of the word relating to the color in Column A. As you can see in the sample I was able to get this to work, but as I mentioned I would have to literally create hundreds of lists to do it across Column A,D,F,H, etc.