I am trying to write a function that searches a column for an index then sums the value in a corresponding column. This function works when run in the immediate window of VBA but when I use it in the spreadsheet it can't find any rows.
The reason I need this formula is because there are more than one rows that can be found.
Function SumIndex2(ByVal sField As String, ByVal sIndex As String) As Double
Dim i As Integer
Dim dSum As Double
Dim rng As Range
Dim firstaddress As String
I have this code attached to a button on the first sheet of a workbook with hundreds of sheets.
it is suposed to look for a cell that contains "SAY:" and then move one column to the right and make it a zero. It works on the first sheet but not on any other sheet.
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
I have a macro that works by pasting formulas into cells and then pasting over them with the values produced by the formulas. It works fine for 500 iterations then crashes at this line:
I need my program to: - find the cell containing the string "Datum/Tid" - record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range Dim lRow As Long Dim lCol As Long
'Find method of VBA Set rFoundCell = Range("A1") Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
This code, supplied through this forum, works perfectly in one workbook but not another. I have created a range called ColourRange, one called ColourIndex but I am getting a '400' error message when I attempt to run it. Can anone explain to me (in very simple terms) why it won't work?
Sub CopyFormatMMT() 'Colour code Owners Dim r As Range Dim f As Range Dim c As Range Dim j As Range Set r = Range("ColourRangeMMT") Set f = Range("ColourIndex") Range("ColourRangeMMT").Select Selection.Interior.ColorIndex = xlNone For Each c In r.Cells For Each j In f.Cells If c = j Then c.Interior.ColorIndex = j.Interior.ColorIndex End If Next j Next c Range("C9").Select End Sub
I am trying to programmatically select an item from a single selection listbox (i.e., set to fmMultiSelectSingle). The following code works properly only every other time I run it; the problem is extremely repeatable.
Const storeStartCell = "B5000" Private Sub ListBox_CounterTOs_Click() selectedTOName = CStr(Mid(Worksheets("Sheet1"). Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 3, 3)) selectedTONumber = CInt(Mid(Worksheets("Sheet1").Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 6, 4)) ListBox_TO_Name.Value = selectedTOName ListBox_TO_Number.Value = selectedTONumber End Sub
The times that it works, ListBox_TO_Name.Value is set to something like "ABC" and ListBox_TO_Number.Value is set to something like "1234". When the values get set properly, the associated click subroutines (e.g., ListBox_TO_Name_Click()) get called automatically when the value is set. The times that it doesn't work, they are both set to "" and the click subroutines do not get called. I also tried
I have a proyect evaluation. I use solver to find a value, which works. I recorded a macro for this situation (which repeats all the time), but when I run it, it does not work. The problem is not the answer, it is that the macro does not run
Sub TIR() SolverOk SetCell:="$M$41", MaxMinVal:=1, ValueOf:="0", ByChange:="$C$44" SolverSolve Range("E44").Select End Sub
When I started using VBA, all the code for each module was shown in the code window. This was a bit cumbersome when looking for one sub in particular. Now when I load VBA, all the Subs and Functions have their own page, and can be selected from the right hand drop down list. This is much easier for entering code, and finding subs. However, it is sometimes useful to see 'the big picture', so how do I swap between the two types of display?
I am trying to create this macro for my accounting journal What I want to happen is that in my sheet1 if the 1st cell in column a is "CASH" then the whole row should be copied and pasted in sheet 2. i want this to happen from the first cell in a column until the very last data in column a which means i am not certain up to what row number it will have data since this is a journal with uncertain number of transactions.
I wrote code to update some workbooks. The code opens the workbooks and then activates the workbook to add the update.
I was tired when I wrote the code to activate the workbook and it is written:
Workbooks("Update").Activate
The updates have already been sent out and it is not working on some computers. (If I change the code to
Workbooks("Update.xls").Activate
it works fine.)
Is there some option in the VBA editor that I can have people change on their computer so the code will run? Why does it work on some computers and not others?
(Unfortunately, rewriting the code to add ".xls" and resending everything isn't an option.)
I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4() Dim r As Range Set r = Range("A1:A6") With Application.FindFormat.Font .Bold = True .Italic = True .Size = 16 End With r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate End Sub
I put together about 10 separate macros that will log you into a site using the values in a given cell. I was having trouble with the last one because of AutoComplete remembering the username. So I put in an IF statement, and when I used F8 to go line for line, it works perfectly. However, when I click F5 and just let it play through, it doesn't log in. I tried adding a 5 second delay, but that didn't seem to work. I still get a run-time error when I hit play.
It get hung on this line:
Code: If doc.getElementById("user_name").Value = cUsername Then
But the complete code is this:
Code: Sub StreetLinks_Login() 'On Error Resume Next
Dim cURL As String cURL = Worksheets("Sheet1").Range("B9").Value
I have a nifty formula brought to me by one of the excellent members on this board. It works perfectly for what I want, but I must admit I cheated, I have a problem that was similar to the problem this formula rectified and I find myself not knowing how it works.
=IF('IIC Transfer Status'!O139="x",MIN('IIC Transfer Status'!K139+10-WEEKDAY('IIC Transfer Status'!K139-{1,3})), "" )
What Im wondering is if someone could enlighten me as to what is happening in this function, so Im not as blind to assume it is magic.
Eventually I need it to be customed tailored to work in this way: I have a column of dates, I want it to look at column A and if there is a date in it ADD 4 WEEKDAYS (business days) and return the resulting date.
i.e date in column a is march 19 plus 4 business days. Result in column B march 23.
If someone can explain how this string works that would be great, or if someone could just post a suitable function, that would work for now.
I have a worksheet which holds a concatenation of AppID's and App Names in Column U. There are approximately 12,000 rows and each cell in Column U holds one of either of the following value formats:
I need to find all instances of a chosen App ID and then copy any row in which the App ID appears to a new sheet (to obtain the chosen AppID I am presenting a list of those to the user in a form Listbox, and I know the selection ofthe AppID is functioning as I am currently presenting it in a MsgBox prior to running this part of the code).
When I run a manual FindAll on a given AppID it returns all the cells in Column U which that AppID appears, but when I use the following code to achieve the same it does not seem to find the AppID's.
(NB - I've "borrowed" this code from a posting on Ozgrid, but I have also compared it to the many other FindAll methods available on the web and they all apppear to be pretty similar).
(The changing of the cells interior colour is just a way of identifying whether it's working prior to writing the code to copy the row ino a new sheet).
Dim temp2WS as Worksheet Set temp2WS = ThisWorkBook.Worksheets("AppID") Dim lCount As Long Dim rFoundCell As Range Set rFoundCell = temp2WS.Range("U1") temp2WS.Activate
I wrote the following basic code earlier (which will end up being part of a larger code)
Code: Dim DateInput As String Dim LastCell As String
Sub LastRowInputBox()
LastCell = InputBox("What is the last row number in the range?", "Last Row Input")
[Code] ......
As you can see, all the ColumnCopyInsert Subroutine does is copy select/copy four columns (E:H), inserts the copied selection immediately to the right, inserts formulas and autofills down to the last row required. I added the LastRowInputBox routine as the range of rows varies from week to week (inserting new rows, deleting others).
The code works great...up to a point unfortunately. If ran as it is, everything that should be copied/pasted will be and cells autofilled to the row specified via the InputBox. Here comes the problem, if any rows are either inserted or deleted then the code throws out "The object invoked has disconnected from its clients" when it reaches the first instance of the following line:
Code: Selection.Insert Shift:=xlToRight
At which point, Excel hangs (or maybe in some sort of loop) and I have to open Device Manager and close the Excel exe process.
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping:
Sub FormattingAcutalReport() Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls" Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls" Dim myBorders() As Variant, item As Variant Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
Sub RemoveCodeAndSave() 'Remove all code from ThisWorkbook code module ThisWorkbook.VBProject.VBComponents("ThisWorkbook").CodeModule.DeleteLines 1, _
[Code]....
I get the error "Run-time error 440: The specified dimension is not valid for the current chart type" why I am getting this. The macro does everything I want it to, except for throwing the error at the end.
Private Sub cmdShowdata_Click() Dim Tgt As Worksheet Dim Source As Range Dim wbSource As Workbook Dim cel As Range Dim rng As Range Dim c As Range Dim i As Long Application. ScreenUpdating = False Set Tgt = ActiveSheet Set wbSource = Workbooks.Open("C:Documents and SettingsDesktopStaff Recoed 2") Set Source = wbSource.Sheets(1).Columns(1) With Tgt .Activate 'clear old data Range(.Cells(3, 2), .Cells(200, 5)).ClearContents ' Loop through names in column A For Each cel In Range(.Cells(3, 1), .Cells(Rows.Count, 1).End(xlUp)) If Not cel = "" Then...................
The above vba command which is extract the data from the Other workbooks. It looks for the "Staff 001", "Staff 002"...these parameters to transfer the data to the worksheet. But, the "Staff 001" data must appear twice in each workbooks. If i use the above command, i only can extract the FIRST "Staff 001" average data. But SECOND "Staff 001" average data cannot extract. I know it may be use FindNext method to do this but i am not sure how to write it
Sheets("Tracker").Activate Set StudentTbl = Sheets("Tracker").Range("A1:" & "Z" & NumStudents)
Set NamePosition = StudentTbl.Find(What:=RightName, LookIn:=xlFormulas, _ LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) I thought the find method returned a range?
I am having trouble using teh find method. I'm using it to search for a string in a column, then give me the row number, which is fine when the string is found, but when it is not I get an error of "variable not set." I'm pretty certain it is returning void, but how to I capture that? Here's the
The objective of this macro is to sort through a database and find all entries that match up (ie 12345 and -12345) and delete these records. when i run it foundCell always returns nothing.
Sub recSheet() Dim balance As Double Dim balanceCell As Double Dim BalanceVal As Variant Dim FoundVal As Double Dim calcmode As Long Dim ViewMode As Long Dim FoundCell As Object Dim myRng As Range Dim sh As Worksheet
With Application calcmode = .Calculation .Calculation = xlCalculationManual .ScreenUpdating = False End With Set sh = ActiveSheet Set myRng = sh.Range("I:I") With sh .Select .................................
giving me a macro to find a word in a sentence by using the "FIND" method. For example I have a sentence say "I am happy" in which I have to search whether any of 2 words say "Happy" or "Sad" is there or not. If the sentence contains any of these words, then that row has to be highlighted.
How to get the GetFromClipboard syntax from here working with my code (below), but am having a really frustrating time. Basically, I need to search for whatever value is copied to the clipboard (as you can see below which will be relative to a certain cell).
Here's what I have so far, and I'm trying to replace the contents of the What:="121212121" part of the Find method to look for the clipboard contents (a 9 char number) in another sheet (where a duplicate exists - the value I am searching will be a unique identifier for the incorrectly created duplicate record that needs to be deleted).
So, What:=<insert number/string on clipboard here>
I am trying to use the .Find method to match a date. In sheet2 I have a range of cells which are formatted to only show the day "dd" (I could format each cell to show (dd-mmm-yy, etc). In sheet1, I have dates which are formatted as "January 7, 2009"
I want to create a VBA find routine which allows me to match the date from Sheet2 (Ranged between cells A1:Z1) with Sheet1. Then output a MsgBox stating "Match found in cell $A$7 of Sheet1" I have tried a formula similar to:
PHP Set FoundCell = Sheets("Sheet1").Range("A1:Z1").Find _ (what:=DateValue("January 7, 2009") ,lookin:=xlFormulas)
