I have this code attached to a button on the first sheet of a workbook with hundreds of sheets.
it is suposed to look for a cell that contains "SAY:" and then move one column to the right and make it a zero. It works on the first sheet but not on any other sheet.
I am trying to write a function that searches a column for an index then sums the value in a corresponding column. This function works when run in the immediate window of VBA but when I use it in the spreadsheet it can't find any rows.
The reason I need this formula is because there are more than one rows that can be found.
Function SumIndex2(ByVal sField As String, ByVal sIndex As String) As Double
Dim i As Integer
Dim dSum As Double
Dim rng As Range
Dim firstaddress As String
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
I am trying get a set of code to run through the sheets in the workbook... All sheets EXCEPT 1 named "Summary".
How can I code the proper statement? This is my current
Private Sub cmdAddDistribution_Click()
Dim ws As Worksheet
Dim lCount As Long
Dim rFoundCell As Range
'check for selected cash flow
If Trim(Me.cboxCashFlow.Value) = "" Then
Me.cboxCashFlow.SetFocus
MsgBox "Please select a Cash Flow."
Exit Sub
End If...............
I am using Excel 2003, Windowx XP Professional, and Internet Explorer 7
In one Excel 3003 example workbook sheet1 contains data copied in from Internet Explorer 7 that keeps changing position on the sheet. From a cell, EG C5, in sheet2 I want to use functions to find a name in Sheet1 and pull the value on the same row say seven columns to the right back into sheet2 cell C5.
My knowledge of Excel is very limited but this would seem to be a simple common thing to have to do, but have been unable figure it out. If this has been answered elsewhere I appologise, this is my first time to this forum which I found with google.
i've got two textboxes and a command button on a userform.
Textbox1's value is "A" Textbox2's value is "B".
On commandbutton_click, i'd like to search down column P for textbox1's value.
then offset -5 to column J and insert textbox2's value.
Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.
I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedI am putting in search items and running a macro to find the items on 'physical servers' WS, copying the header in that WS and the entire line the match appears on, though I cannot get it to do this.... it is really causing me stress
Then next part that is working is the items that return false are showing up on the results page - this is expected and what i want it to continue to do.
What I cant seem to work out also is how to run the search on the 'Virtual Server' WS also and return the results to the results WS as just like the 'physical servers' WS.
I have included some dummy data + code + the expected result on the 'Server Results' WS.
Hope you all can work out a way to make it work.
I want to search a column, from A30 moving up to A10 for the first value in excess of 0.
Having found the value the search stops and I want to select the cell next to it in B column.
Then I want to check if a value in B column exists. If no value exists I want to enter a fixed value from another sheet.
If a value does exist I want to take no action and move on to Column C to repeat the checking process for columns C and D.
Then I want to move to the next spreadsheet and repeat the process.
The code I have written so far is below and I just can't get it to work.
I have attached a spreadsheet to illustrate the problem.
Sub Closingdata()
Dim a As Integer
Dim b As Integer
Dim rngOutput As Range
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("sheet1", "sheet2")
Set shtTemp = Worksheets(vntName)
shtTemp.Select
shtTemp.Range("a30").Select
Do Until ActiveCell.Value > 0
If ActiveCell.Value > 0 Then
ActiveCell.Select
Exit Do
End If
I am trying to write a macro that will find duplicate listings in two worksheets by row. I don't really want to do a user form unless I have to.
View 9 Replies View RelatedI've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
[Code] .....
i attached link to sample and its contains employee sheets and Report sheet ,and in Report sheet there is comment
[URL]
Is it possible to loop through a list of sheets and execute some calculations that have sheet references from a different list of worksheets? For example, you have a list (list 1) of your worksheets, which will be the destinations of the calculations, and you have a second list (list 2) of worksheets that the calculations are based on. So, lets say there are sheet1 and sheet2 in list 1, and sheetA and sheetB in list 2. The calculations based on sheetA would appear in sheet1, and calculations based on sheetB would appear in sheet2. I thought the code would look something like this:
Code:
Sub LoopthroughWorksheets()
Dim sheet_name As Range
Dim sheet_name2 As Range
Set sheet_name2 = Sheets("WS").Range("F:F")
[Code] ......
I'm getting a "Run-time error '1004: Application-defined or object defined error" at this line:
Code:
.Range("K1") = .Range("sheet_name2.Value!A14").Value
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
I basically have a sheet where clicking a button on a UserForm creates an email and populates it with data from a specified sheet. So for example, the attachment v3.1, I've included looks at Sheet1 and populates an email with the data. However, I want it to drag data from another sheet. So, as per the attachment v3.2, I want the UserForm on Sheet1 and the data on Sheet2.
It works fine if the UserForm and data it's looking for are on the same page, but it won't find information from another sheet when the code is changed? I thought changing the code to Sheet2 instead of Sheet1 would work fine, but that's not the case!
I have a number (>100) of excel workbooks (consistent format) on a server and I am trying to create a master spreadsheet with links to specific cells. I started using formulae based on Concatenate and Indirect functions but always had to use F2 & F9 to get a result. I am now working on a macro to build semi dynamic links, I am some way there but need some expert help please.
In Col A I have the path and file name for all my source files - I have used the Filename *.xls & FoundFiles for this.
In Col B is my specific file name(s) extracted from Col A using an If , Len and Text function.
My macro declares variables; File = Range (“B#”) and Data(21) - an array of 21 specific worksheet cell references
I then select C1 and with active.formula insert the consistent path, File and Data(1).
Then C2 with path name, File and Data(2). Then C3 path name, File and Data(3). & So on for the 21 variables in the array - not elegant but it works okay
I am now at the point where I need to move down the rows and repeat this for each source.
I am wondering (hoping ) there is a simple way of offsetting this for the 100 rows / source files. I would also like to be able to set the offset repeat by counting the number of populated rows in Col A.
The code (from memory so syntax may be a bit wonkey):
How would I loop this macro to drop down one row to B4, run through the procedure (there are always the same number of rows to move), and continue to offset one row until reaching the end of the data?
The problem is that when I pull report data into excel, the data and headings end up in the first three columns. This is a simple cut, paste and delete macro that I recorded. I need it to offset to b4 after moving the data under b2, run, then b5, run, ect. so at the end I will have a list of numbers in column B and the coresponding data on the same row.
Range("B3:D3").Select
Selection.Cut Destination:=Range("F2:H2")
Rows("3:4").Select
Selection.Delete Shift:=xlUp
Range("B3:D3").Select
Selection.Cut Destination:=Range("I2:K2")
Rows("3:4").Select
Selection.Delete Shift:=xlUp
Range("B3:D3").Select
Selection.Cut Destination:=Range("L2:N2")
I found sheet code on the forum that highlights the both the entire row and column when a cell is selected.
This is great, but is there a way I can make this an add-in so it is easily available in all workbooks and sheets?
How can run a loop for all the sheets on the right side of sheet tab named Target?
View 3 Replies View RelatedThis code, supplied through this forum, works perfectly in one workbook but not another. I have created a range called ColourRange, one called ColourIndex but I am getting a '400' error message when I attempt to run it. Can anone explain to me (in very simple terms) why it won't work?
Sub CopyFormatMMT()
'Colour code Owners
Dim r As Range
Dim f As Range
Dim c As Range
Dim j As Range
Set r = Range("ColourRangeMMT")
Set f = Range("ColourIndex")
Range("ColourRangeMMT").Select
Selection.Interior.ColorIndex = xlNone
For Each c In r.Cells
For Each j In f.Cells
If c = j Then
c.Interior.ColorIndex = j.Interior.ColorIndex
End If
Next j
Next c
Range("C9").Select
End Sub
I am trying to programmatically select an item from a single selection listbox (i.e., set to fmMultiSelectSingle). The following code works properly only every other time I run it; the problem is extremely repeatable.
Const storeStartCell = "B5000"
Private Sub ListBox_CounterTOs_Click()
selectedTOName = CStr(Mid(Worksheets("Sheet1"). Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 3, 3))
selectedTONumber = CInt(Mid(Worksheets("Sheet1").Range(storeStartCell).Offset(ListBox_CounterTOs.ListIndex, 0), 6, 4))
ListBox_TO_Name.Value = selectedTOName
ListBox_TO_Number.Value = selectedTONumber
End Sub
The times that it works, ListBox_TO_Name.Value is set to something like "ABC" and ListBox_TO_Number.Value is set to something like "1234". When the values get set properly, the associated click subroutines (e.g., ListBox_TO_Name_Click()) get called automatically when the value is set. The times that it doesn't work, they are both set to "" and the click subroutines do not get called. I also tried
myListbox.Selected(myIndex) = True
I'm currently writing a macro to check for changes between versions of a spreadsheet. I'm having a problem looping through the sheets and selecting equivalent (named the same)sheets in both sheets. My attempt at code (stripped down a little) is here.
Option Explicit
Sub Difference_Checker()
Dim Check As Boolean
Dim Row As Integer
Dim Column As Integer
Dim ColRef As String
Dim MaxLength As Integer
Dim MaxWidth As Integer
Dim i As Integer
Dim j As Long
Dim Shtname As String
Dim StartTime As Variant
MaxLength = 100
MaxWidth = 256
'Set Application Settings
Application. ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual....................
I have a proyect evaluation. I use solver to find a value, which works. I recorded a macro for this situation (which repeats all the time), but when I run it, it does not work. The problem is not the answer, it is that the macro does not run
Sub TIR()
SolverOk SetCell:="$M$41", MaxMinVal:=1, ValueOf:="0", ByChange:="$C$44"
SolverSolve
Range("E44").Select
End Sub
I only need this as a workaround to the 8192 hidden row limit when copy and pasting.
View 4 Replies View RelatedHow do I selectively rename sheets by sheet code name?
Instead of sheet1.name = "New Name" I need sheet1 to be a variable of a specific sheet.
I am trying to create this macro for my accounting journal What I want to happen is that in my sheet1 if the 1st cell in column a is "CASH" then the whole row should be copied and pasted in sheet 2. i want this to happen from the first cell in a column until the very last data in column a which means i am not certain up to what row number it will have data since this is a journal with uncertain number of transactions.
View 9 Replies View RelatedThis snippet of code works fine when I run it. When another user uses this same workbook and runs it it gives an error:
Sheets("Data").Select
Range("A2").Select
ActiveSheet.Paste
This is the line highlighted by excel:
ActiveSheet.Paste
I have tried changing it to:
Sheets("Data").Paste
I wrote code to update some workbooks. The code opens the workbooks and then activates the workbook to add the update.
I was tired when I wrote the code to activate the workbook and it is written:
Workbooks("Update").Activate
The updates have already been sent out and it is not working on some computers. (If I change the code to
Workbooks("Update.xls").Activate
it works fine.)
Is there some option in the VBA editor that I can have people change on their computer so the code will run? Why does it work on some computers and not others?
(Unfortunately, rewriting the code to add ".xls" and resending everything isn't an option.)
I need to copy the value from cell Z18 and then use the function 'paste values' to input the data in cell B24.
Having done this I need the sheet to recalculate and generate a new set of random numbers. I then require the new value in cell Z18 to be copied and pasted in the next row of column B, cell B25.
I need this process repeating for 10,000 iterations so that the range B24:B1023 is filled.
Here is my code, it will recalculate cell Z18 and return the value in cell B24, but will not offset down one row and loop.
I have a workbook with 2 sheets. Both the sheet contains Column "Name,Avg,Max". Compare both the sheets and paste the Avg values in Sheet3(Avg) and Sheet4(Max). I have attached the sample file below.
comparison.xlsx‎
