For/Next To Change .Left & .Width Parameters
Jun 26, 2006
Is it possible to change the Left and Width parameters of a group of TextBoxes in a For/Next loop, when the only common factor is the amount of change? The TextBoxes ar of different widths and locations. The common factor is a small TextBox the left of each TextBox which is what I am hiding under certain conditions. When hidden I need to move the TextBoxes over to where the hidden TextBox was and then enlarge the TextBox by the widt of the heddin TextBox (When the condition changes, I will resore the orginal positions and sizes).
vba did not like this bit of code in a For/Next loop:
Me.Controls("TB" & i).Left.Value = Me.Controls("TB" & i).Left.Value - 24
Me.Controls("TB" & i).Width.Value = Me.Controls("TB" & i).Width.Value + 24
View 5 Replies
ADVERTISEMENT
Mar 16, 2007
I have a workbook that requires a multiple of 3 to be entered in a cell. If a quantity other than a multiple of 3 is entered, a Msgbox pops up and requires the quantity to be changed to such value.
I am looking for where this is handled. I found part of it in a Private Sub:
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
But I cannot locate where the other parts of the code is stored....
I would like to see how this is handled so I can incoporate this in my own worksheets.
View 9 Replies
View Related
Jul 29, 2013
is there a way to save column widths once a pivot table is refreshed..
if not what is the vba code (and on what event procedure) to set the width for columns M to AF set to 13.
View 2 Replies
View Related
Dec 21, 2007
How do I write a short piece of code that defines the specific height and width that I want to assign to an existing chart. The code will be added to existing code that I have that formats the chart in other ways. This needs to be able to work with any active chart selected, not a specific named chart.
View 2 Replies
View Related
Apr 17, 2008
I have vba code to change column width and height into mm.
The code is taking alot of time to run and then hangs my excel session.
The code below calls two sub routines.
Sub Change()
Dim i As Long
With Application
.DisplayAlerts = False
. ScreenUpdating = False
End With
For i = 1 To 23
SetColumnWidthMM i, 3.5
Next i
End Sub...
View 3 Replies
View Related
Sep 7, 2010
I've just switched to 2007 and can't seem to find where they've moved the ability to change the width of bars in a chart. Where is it in 2007?
View 7 Replies
View Related
Oct 6, 2013
I have just been sent a strange file, which I have attached, on its only sheet columns "A" and "B" have data entered in them, but they are not visible. You can access them if you select column "C" and use the left arrow key, but all attempts at unhiding and changing the column width are fuitless.
I have tried selecting the ENTIRE sheet, then Home>Format>Unhide Columns but it does nothing I try selecting the entire sheet, then Home>Format>Column Width and setting it to something, like "20", but again it is fruitless.
I even tried using a macro in the "Immediate Window" to ask Excel whether the columns are hidden (by using "?Columns(1).Hidden" and it returned "False") then I used a similar macro ("Cells.EntireColumn.ColumnWidth = 12.75") and again - nothing! :O
View 3 Replies
View Related
Nov 17, 2009
Is it possible to set parameters on a query but use a wildcard to return all instances? I have a query that I want to be able to set multiple parameters on but give the user the ability to select as many or as few parameters as they want to see. 2 of the parameters are number fields and 2 are text fields with no spaces.
View 4 Replies
View Related
Mar 19, 2008
I have a form where I want to change the color box on the left hand side see attached image. Now it is a static and I want it dynamic where the user chooses the color. Now it is constant using an image with the color green, red, blue, etc... I want a color picker so user can pick their own colors and when the color is picked the code will pick the color number.
View 9 Replies
View Related
May 24, 2012
Is it possible to adjust a cells' column width without the whole column width changing? EXAMPLE...I'm looking to lock rows 1-41 at certain column widths and change the column width as needed from rows 42 and below.
View 4 Replies
View Related
Sep 4, 2013
I'm using Excel 2010. When I type 'true' or 'false' in any cell, Excel automatically changes to CAPITAL and Align Centre. I have to use the function 'lower' to change to lower case and manually to align to the left.
How to change the default setting.
View 1 Replies
View Related
May 8, 2014
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
View 9 Replies
View Related
Feb 5, 2009
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
View 2 Replies
View Related
Nov 19, 2009
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
View 3 Replies
View Related
Mar 14, 2014
I am trying to add a 0 if it is missing at the start of the number in columns K2:K3000 and L2:L3000, The numbers do not have fixed lengths so I cant use the custom setting but if the number starts with a 7, 8 or 3 I want to add a 0
View 6 Replies
View Related
Apr 1, 2014
Excel Question 1.jpg
I need to have a code that looks up Column 1 (Parameter 1) first, then looks up Column 2 (Parameter 2), and inputs Column 3 (Value). The code needs to be in a SINGLE cel.
I thought initially using a Lookup function within another Lookup function might work, but I can't seem to get the code to work properly.
View 7 Replies
View Related
Dec 7, 2013
I'm working on an attendance tracker for church. We will have folks scan a QR code and fill out a 2 question survey: Name of person being checked in and date of check in. Both are mandatory and are set in such a way as to always have the same formatting every time. That's my first sheet, it just gathers the data. My second sheet actually has the attendance tracker with the roll and dated columns. What I'm trying to create on the second sheet is a formula that will search the first sheet for the date and name and return a 1 if they were there that day.
View 7 Replies
View Related
Oct 7, 2013
I have a datast that looks like:
ID Week Sales
1 1 $200
1 2 $300
1 3 $200
1 4 $250
1 5 $220
1 6 $100
2 1 $500
2 2 $100
2 3 $230
2 4 $250
2 5 $210
2 6 $110
I will have 3 parameters in different cells that will identify the range of data in which i'd like to get a SUM for:o
ID,
Week,
Number of weeks.
So for example my I would identify ID =1, Week = 3, # of Weeks = 2
I should get an output of: $450 ($200+$250, rows 3+4 from above).
I've tried using IF(AND and Sumifs nested.. but it's not working out..
View 3 Replies
View Related
Jan 10, 2007
I am using the following formula and I need to modify it a little:
=IF('Input Sheet'!A17="AR",0,'Input Sheet'!F17)
All I need to do to the above is add "MISC" to the formula. I have tried but I keep getting errors.
Basically I want:
=IF('Input Sheet'!A17="AR" OR "MISC",0,'Input Sheet'!F17)
View 9 Replies
View Related
May 22, 2007
Is there any way to use an Excel cell as a parameter for MS Query.
i.e. Select fields from table where field = "cell value"
I tried the $ ($D$5 ) got Invalid pseudocolumn error; which leads me to hope there might be a way to introduce a VALID pseudocolumn in my Query.
View 9 Replies
View Related
Feb 4, 2009
I have a query that has criteria based on "is one of". I would like to pass this off to a parameter selected from a list box where the user could select multiple items. Is something like this possible?
View 9 Replies
View Related
Mar 31, 2014
I need to modify the following formula,
=IF(G5=-105,-105,-G5-IF(ABS(G5)>251,40,IF(AND(ABS(G5)>221,ABS(G5)<251),30,
IF(AND(ABS(G5)>180,ABS(G5)<221),20,IF(AND(ABS(G5)>=100,ABS(G5)
[Code].....
View 10 Replies
View Related
Dec 26, 2013
I need to search for 3 parameters, L, M and P based on the *** and age from the attached excel file wtageinf.xls and enter them into the formula below
((X/M)**L) - 1
Z = -------------------------, L≠0
LS
or
Z = ln(X/M)/S ,L=0
where X is the weight of the child. The formula is for the Z score.
View 1 Replies
View Related
Feb 5, 2009
I have a spreadsheet in which one column I'm trying to find a value in another table that has 3 columns (A, B, C). I need to find all the values in A, that fulfill the parameters of less than 1.5 in B, and great than 5% in C.
They all need to be listed in column H while skipping the records that do not meet this criteria.
View 9 Replies
View Related
Apr 30, 2014
So below is an Sample (Actually about 200 people) of a manually finished product (without names). All parameters must be met.
Basically it will break the Big groups into smaller groups of 4. Assigning the smaller groups a numeric group number starting with 1.
Parameters. No more than 2 members of a club in one small group. No more than 7 lbs between lowest weight member and largest weight member. If it can not complete this, a 3 or 5 (preferably 5) man group can be made.
Sample 3 excel forum.xlsx
View 1 Replies
View Related
Jun 19, 2014
I am getting erors when i am trying to use excel parameters in sub query
select gen_fundnumber
from FilteredGen_fundmain
where gen_customeridnumber =
(select distinct gen_customeridnumber from FilteredGen_fundmain
where gen_fundnumber =? )
If I am changing the ? to '123' it works fine.. The second select with the ? parameter is running alone excellent.
View 1 Replies
View Related
Mar 27, 2008
How can I get at parameters passed on a command line to Excel 2007?
For example invoking Excel from Vista's Run command with:
"C:ProgramDataMicrosoftWindowsStart MenuProgramsMicrosoft OfficeMicrosoft Office Excel 2007" "C:GZNORPWeather StationParamTest1.xlsm" /e/abc/def
Should reveal the parameters "abc" and "def". But this does not happen!
Supposedly, the API function GetCommandLine does this, but I cannot seem to get it to work. Here's a sample of what I've been trying:
View 9 Replies
View Related
May 27, 2008
In order to be able to replicate something like the MATCH function, which accepts a String (or cell reference), an Array of Strings (or a range of cells) and then the match type as parameters, how do I declare such a function header?
it is returning #VALUE without executing any of the function. It is something to do with the Array of Strings that is causing the problem.
View 14 Replies
View Related
Oct 29, 2009
I've got some data formatted by column in the worksheet that I'd like to pass into the function and have it return something from an array. This is essentially a replacement for vlookup, but easier considering the volumn of data I've got. Take something like this...
Column N will have integers (0 through 20)
I want to pass contiguous parts of N into the function and have it return the corresponding sum of values from the respective positions in an array I defined locally. Here is the function:
View 2 Replies
View Related
Jun 18, 2009
I have a long list of past jobs, around 4000+. I have multiple fields, but I really wish to concentrate on the:
1) Job Type - Example would be Medical or Imprint
2) Job # - Correlates when it was done - Example would be 91059 would be a job within 2008-2009 fiscal year.
All the jobs are listed in the first spreadsheet. The second spreadsheet will hold generalized data broken down by the Type of Job and the fiscal year it was done.
I wish to first count how many jobs fit a specific job type. This was easily done:
=COUNTIF(Data!A2:A4121,A7)
A7 = Medical
A1:A4121 = the range of the names.
Count comes up as 346, which is correct.
I then want to add another parameter to break up the 346 by fiscal year. It ranges from 05-06 to 08-09. I came up with this:
=COUNTIF(Data!A2:A4121,A7)-COUNTIF(Data!F2:F4121,"9????")
Since the job # correlates to the fiscal year it was created, anything starting with 9 is a job done in 08-09. Anything starting with an 8 would be of course 07-08 range. I would have multiple fields with each different fiscal year.
However, when I put the 2nd formula in the function didn't work. It keeps the count at 346, which I know is wrong. I am not sure if I did something wrong here. Been looking at this for an hour and can't figure out what is wrong. The jobs that are medical within 08-09 fiscal year should be 120, but it keeps at 346.
View 14 Replies
View Related
