I have forced the tab order of sheet. Unlike the example with the link, I have used named ranges instead of cell references in the array to order the tab sequence. (the named range are single cells and merged cells)
Force Tab Order Of Cells
Just like the author of the link, the sequencing works great but if I choose click on another cell (that is in the pre-determined sequence) it then takes me to the next pre-determined cell int he sequence.
I have tried the code the "shg" has suggested for merged cells to no avail. Maybe it has something to do with the name ranges.
Dim aTabOrd As Variant
Dim iTab As Long
Dim nTab As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
I found the following code which works fine until I start to select multiple cells in cell B for deletion etc. At this point it throws up a run-time error 13 type mismatch, which will cause problems when other people start to use the spreadsheet.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column <> 2 Then Exit Sub If Target.Offset(0, -1) = "" Then Target.Select Application.EnableEvents = False Target = "" Application.EnableEvents = True MsgBox ("You must enter Atlas Part No. first") End If End Sub
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I have input cells on a protected sheet with a tab order array setup. It was originally set up to work when their was a Worksheet Change. Not every cell is going to have data input into it. This is where the problem lies. If a cell is left blank it tabs out of sequence. I changed it to a Worksheet Open Sub but that didn't work.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I have just started diving into the vast world of dynamic ranges and it's a bit overwelming. I have a dB of sorts that a listbox in a userform fills off of. The dB will be driven by column A and B. Column B are names that are displayed in the listbox. Column A is the class that these names belong to (3 classes). I need to develop dynamically named ranges of Column B based off of Column A. In other words, I need a dynamically named range for all of class1, class2, and class3 in column A to display column B in the listbox on the userform. I have attached an example to clarify the example.
=IF(ISERROR(IF(Search1="","No Place Found",INDEX(LocationsANDLocations2,MATCH("*"&Search1&"*",LocationsANDLocations2,0)))),"No Place Found",IF(Search1="","No Place Found",INDEX(LocationsANDLocations2,MATCH("*"&Search1&"*",LocationsANDLocations2,0))))
But its not finding anything on the second table, being LocationsTable2.
LocationTable is about 65500 rows, and next to it another row of 65500.
What is the best method of linking the them, so it can search for matched text in each cell, so it looks in LocationsTable then LocationsTable2 and so on.
I have a VBA method that goes thru and calculates a bunch of stuff and puts this calculated info into a static data structure. This method is called 'setProjectInfo()'. This method is reliant on values on my worksheets, So as the user makes changes to the worksheet, I want setProjectInfo() to get called so it refreshes the data structure with updated information. I then have a bunch of helper methods to access different parts of this data structure. These helper methods are used in the formulae of a bunch of cells on a worksheet (ie '=getPercentComplete(period)', etc, etc).
This is all working well except for one thing. Sometimes the helper methods get called BEFORE setProjectInfo() gets called.. So, the helper methods return stale information. I can only get around this by manually recalculating the spreadsheet again. setProjectInfo() does enough stuff and takes a long enough time that I don't want to have to call it at the top of each helper method.
I've put the call to setProjectInfo() in a cell formula at the top of the my spreadsheet in hopes that Excel would know enough to call it first.. But that does not seem to work. Net, how can I get VBA to always call setProjectInfo() BEFORE it calls any other VBA methods?
I am looking for a solution to dynamically create named ranges according to the contents of cells in a particular column. The following code works for 1 word names, but in many cases the title cell contains numerous words separated by spaces. Is there a way I can adapt this code so that it will name the ranges with the spaces removed? For example, where cell C2 contains the narrative 'Sales Ledger Control', I would want the range name 'SalesLedgerControl'.
Range("R2:Z2").Name = Range("C2")
The named ranges are referred to in numerous other worksheets, where selecting a particular narrative from a listbox creates a dependant drop-down in the adjacent cell (eg if Sales Ledger Control is selected, the dependant list contains names of customers). FYI, the data validation in the other worksheets ignores the spaces in the range names, ie: =INDIRECT(SUBSTITUTE(G2," ",""))
It would not take me long to name the ranges manually, but a macro is preferable because the narratives in the title cells will often change and the range names will obvioulsy also therefore change.
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Count > 1 Then Exit Sub Dim i As Long
For i = 1 To 31 If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
I am wanting to display cricket bowling figures - the best figures for each player as the season progresses.
I track runs and wickets each week like this:
Runs 23 25 18 35 Wickets 1 3 2 3
Sorry can't post attachments. Top row is A1:E1. Bottom row is A2:B2. This shows the bowling figures for 4 weeks.
I need to sort the Wickets range and find the highest number. When there are two or more cells returned with the same value (as there are here (3)), we then need to find the lowest value in the runs range for these two matches.
The result needs to be displayed as follows:
(number of wickets hyphen number of runs)
In this example 3 wickets was found twice. 25 runs were conceded one week and 35 runs another. So the result needs to be: 3-25
When there is only one cell with the highest number of wickets, the number of runs for that week is chosen without any need to check anything else.
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to 2) Header: the header to search for in order to copy the data underneath it 3) WorkbookName: the name of the workbook to search in
It looks like this:
VB: Function LoadParameters(Output_Range As Range, Header, WorkbookName As String) MyTimer = Timer 'Defining the variables. Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate() Dim lngRow As Long Dim intIndex As Integer UserForm1.ComboBox1.Clear 'Clear combobox lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> "" For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1 If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value Then Goto NextRow End If Next intIndex UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value NextRow: lngRow = lngRow + 1 Loop End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
At the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
I am having problems getting the code below to follow my intentions. I have 2 files. I have a temporary file that holds all the data that I need. I have a destination file that needs to have data copied into it. In the temp file, I have data for several dates and product types. What I intend to do is to do a vlookup in VBA to look for the date and the product type in the temp file and copy the appropriate data to the destination file. I have numerous named ranges both in my temp file and my destination file. For the code below, I wanted to make a loop to find the date in the temp file that is listed in the destination file. Once this is done, I wanted to find the product type in the temp file that is listed in the destination file. If both conditions exist, then copy a certain range from the temp file to the destination file. My intention is evident in the code, but I don’t think that I am putting in the correct “code format”.
(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
I'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
I have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
The worksheet contains 20 different datasets which are divided into separate 30 x 10 grids, all of which help comprise a larger 300 x 20 grid. I have defined each smaller grid/dataset as its own named range. Originally the entire dataset started in A1, but I am shifting it dataset down by 40 lines to create space to work at the top of my workbook.
I am wanting to create a data validation list in A1, then have cells A3:J32 populate with the named range I select in A1. However I also want this populated dataset at the top of the sheet to be a mirror -- not a copy.
Therefore once I have the data in my range available A3:J32, anything I manipulate would be mirrored in the original range in the lower portion of the workbook.
I am importing an external Sheet into my Excel workbook but it only imports the data not the named ranges. I need the named ranges to be imported and overwrite any existing range of same name.
Example:
In existing workbook Sheet I have a named range, ABC which is A1:E10 - in the Sheet I am importing the ABC range is A1:E12. So when I have done import I want named range ABC in my workbook to become A1:E12 (as per external Sheet).
This is the code that import data (but not named ranges)
