Force Data Entry In Cell In Order
Dec 30, 2007
I found the following code which works fine until I start to select multiple cells in cell B for deletion etc. At this point it throws up a run-time error 13 type mismatch, which will cause problems when other people start to use the spreadsheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 2 Then Exit Sub
If Target.Offset(0, -1) = "" Then
Target.Select
Application.EnableEvents = False
Target = ""
Application.EnableEvents = True
MsgBox ("You must enter Atlas Part No. first")
End If
End Sub
View 2 Replies
ADVERTISEMENT
Aug 21, 2007
I've been searching but I can't find an answer that fits. Here's the closest I've come. Force Date Entry on Particular Condition. What I need is if A10 has any data in it then I want a box to pop up that instructs the user to input data into B10 they click OK and then enter the data. Once the user inputs data into B10 then the error should be cleared. If they don't enter data then the error should keep coming back.
View 3 Replies
View Related
May 30, 2008
I have an Excel sheet which serves as an input form. I would like to set something up where if the user inputs any value into the cell range B12:B100 then they are forced to also enter a value in column J of that same row.
Maybe something could be done where if they enter a value in B12, then they cannot enter a value in B13 before entering a value in cell J12?
View 9 Replies
View Related
Jun 13, 2009
I have forced the tab order of sheet. Unlike the example with the link, I have used named ranges instead of cell references in the array to order the tab sequence. (the named range are single cells and merged cells)
Force Tab Order Of Cells
Just like the author of the link, the sequencing works great but if I choose click on another cell (that is in the pre-determined sequence) it then takes me to the next pre-determined cell int he sequence.
I have tried the code the "shg" has suggested for merged cells to no avail. Maybe it has something to do with the name ranges.
Dim aTabOrd As Variant
Dim iTab As Long
Dim nTab As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim iNew As Long
If IsEmpty(aTabOrd) Then
View 3 Replies
View Related
Feb 9, 2007
I have a spreadsheet that I add to daily with 3 Columns that are always the same. Name, ID number and Phone Number.
Is there a way to make it so that when other people in my department use this that no matter how they enter the name, it is always formatted the same. No matter they enter the ID number and phone number they are always formatted the same. I've tried some variations of data validation but couldn't get to where I need to be.
Attached is a simple example.
I'd like the name to always be formatted as Smith, Bob
I'd like the ID Number to always be formatted as xxx xx xxx
I'd like the Phone Number to always be formatted as xxx xxx xxxx
View 9 Replies
View Related
Jul 31, 2008
I need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies
View Related
Sep 23, 2009
I am building Food Stand Orders Record Table, which I would like to automate and reduce the data entry process as much as possible so that it will take as long to enter all 400 orders into the spreadsheet and mitigate errors and calculate totals. I am looking for ideas as to how to make this easier to update. Also, I am not set on the concept of the spreadsheet, if there is a better way to capture this data.
Below is a list of columns in my Order Record Spreadsheet: My spreadsheet start on A5. The Header row is A5:N5
No. = record input number
Order # = The number of the order taken (i.e. 35306 – 11, 35306 – 12)
Item = The Items sold from each order #
Item Category = Was the item sold a special order or standard order
Date = The date the items and orders were sold
Time = The time the order was taken
Quantity = how many of the item was sold for that order #
Order Taker = record of who (order taker) took the order #
Item Price = What is the price of one unit x the quantity of the item sold
Total Order = What is the total cost of each item price associated with the same order #
Cash Received = We only accept cash, what was the cash tendered with the order#
Change = What is the change amount given to back to the customer associated with the order #
Donation Received = Is the change amount, When customer associated with order# did not accept the Change.
Notes = special notes related to the order#
View 15 Replies
View Related
Jan 1, 2008
I have input cells on a protected sheet with a tab order array setup. It was originally set up to work when their was a Worksheet Change. Not every cell is going to have data input into it. This is where the problem lies. If a cell is left blank it tabs out of sequence. I changed it to a Worksheet Open Sub but that didn't work.
Code is as follows: ...
View 9 Replies
View Related
Jan 16, 2009
I have a spreadsheet in which has many different cells that need to be completed if another cell has data.
Examples
If the user inputs a name into A3, they must complete cells B3 thru D3. Cells B3:D3 contain different entry methods including a drop down list.
On the same sheet, if the user chooses GTD from a drop down list in cell U3, cells BA:BJ must be completed. And if they choose GCI from the drop down list in U3, they must complete cells BK:BR
View 9 Replies
View Related
Dec 30, 2007
I want to change data through a user form and disable users from going around my form. I want users to see the underlying spreadsheet as the form manipulates data.
If I enable a form in Modal mode users can bypass the form. If I use it without modal form I can't change data from my form. I seem to be in a catch 22.
View 5 Replies
View Related
Mar 20, 2008
I'm designing a spreadsheet for users to enter the length of journeys that they've claimed on their expenses. In order to ensure consistency between users, I want to add two drop-down boxes or listboxes that will offer a list of common locations (eg. office A, office B, office C, customer A): one for the start point, and one for the finish point. These will be referenced by a lookup table that will automatically fill in the journey distance.
However, users will also need to be able to input other locations themselves (ie. if a journey starts at home, not at the office). If I use data validation to create the drop-down box, it will only allow the values on the list; is there something that functions like validation in offering the user a range of options, but also allows other values?
View 4 Replies
View Related
Jun 30, 2008
I am using Control Tool box combobox in worksheet.How to change the Combobox to Non Editable combobox?
View 3 Replies
View Related
Feb 16, 2007
Below is the existing code that I'm working with and would like to be able to make the ' name' column either Upper or Proper case on entry. I haven't decided which I'm going to use yet.
Set r = Sheet1.Range("A2:C65536")
If Not Intersect(Target, r) Is Nothing Then
sTgt = Trim(Target.Value)
If sTgt = "" Then Exit Sub
Select Case Target.Column
Case NmCol
If InStr(sTgt, ",") = 0 Then
iSpc = InStrRev(sTgt, " ")
Target.Value = Mid(sTgt, iSpc + 1) & ", " & Left(sTgt, iSpc - 1)
End If
View 3 Replies
View Related
Sep 5, 2007
A form loads and the first thing the user is to do is enter a specific date in a text box (preferably in, "mm/dd/yyyy" format.)
Is there any way to set up the text box so that when the form loads, the, "/"'s (slashes) are already in place? And can I set it up so that if the user enters in the date in any other manner aside from, "mm/dd/yyyy", that it will give them an error?
Finally, I want the user's date input to store on a worksheet (in row, "G".) So the first time the user uses the form, they type in a date and it stores the date in the FIRST AVAILABLE CELL IN ROW, "G." (example: "G1") The next time they use the form and type in a date, it is to store in, "G2", then in, "G3", ect. Each time they fill out the form, the new entry is to save in the next row beneath the previous entry.....
For other text boxes and combo boxes I have been using the following code to do this:
Sheets("Sheet1").Range("A" & intRow) = Text.Value (or Combobox.Value - depending on whether it was a text box or a combo box.)
Unfortunately I have NO idea how to apply this logic in regards to text boxes that are to store dates.
View 9 Replies
View Related
Apr 22, 2009
I have a VBA method that goes thru and calculates a bunch of stuff and puts this calculated info into a static data structure. This method is called 'setProjectInfo()'. This method is reliant on values on my worksheets, So as the user makes changes to the worksheet, I want setProjectInfo() to get called so it refreshes the data structure with updated information. I then have a bunch of helper methods to access different parts of this data structure. These helper methods are used in the formulae of a bunch of cells on a worksheet (ie '=getPercentComplete(period)', etc, etc).
This is all working well except for one thing. Sometimes the helper methods get called BEFORE setProjectInfo() gets called.. So, the helper methods return stale information. I can only get around this by manually recalculating the spreadsheet again. setProjectInfo() does enough stuff and takes a long enough time that I don't want to have to call it at the top of each helper method.
I've put the call to setProjectInfo() in a cell formula at the top of the my spreadsheet in hopes that Excel would know enough to call it first.. But that does not seem to work. Net, how can I get VBA to always call setProjectInfo() BEFORE it calls any other VBA methods?
View 3 Replies
View Related
Dec 14, 2011
I have a list box in a user form using R2:R3 as Row source.
I need to force the users to choose one of the items and not allow a blank entry to be entered.
I used the code below for the entries however it still allows for a blank to be entered into the Cell.
This part of the code works for Me.sapor = "" Or Me.jobna = "" Or Me.ordernu = "" But not for the next (2) list boxes it allows blanks Or Me.snd = "" Or Me.mcode = ""
Me.Snd and Me.mcode are list boxes.
Code:
If Me.sapor = "" Or Me.jobna = "" Or Me.ordernu = "" Or Me.snd = "" Or Me.mcode = "" MsgBox ("Feilds SAP Number, Job Name, Price, Code and Month Code Must be Completed")
Exit Sub
Code:
Private Sub CommandButton1_Click()
Dim rNextCl As Range
' Row count = where the select cell finishes and window box moves to rows over
' offset = howmany cells up or down from the row count
[Code]....
View 2 Replies
View Related
Oct 4, 2013
I have a user form and in my code I am using the Erow function
EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
View 6 Replies
View Related
Sep 16, 2009
B2: =SUMPRODUCT(--(INT('Order Entry'!$B$2:$B$37)=Summary!$A2) )
C2: =SUMPRODUCT( (INT('Order Entry'!$B$2:$B$37)=Summary!$A2) * 'Order Entry'!$A$2:$A$37) / Summary!B2
D2: =MIN(IF(INT('Order Entry'!$B$2:$B$37)=Summary!$A2, 'Order Entry'!$A$2:$A$37))
E2: =MAX(IF(INT('Order Entry'!$B$2:$B$37)=Summary!$A2, 'Order Entry'!$A$2:$A$37))
The overall picture is an order tracking sheet that has start times in column B, end times in column C, number of jobs in an order number in column D and the processing time in column A. On the Summary sheet I have dates listed for each workday.
Next to these dates I am wanting a formula that will traverse through column B of the Custom and Order Entry sheets and provide the number of orders and average processing time that match this. There can be multiple jobs per order number so it needs to order the Sumproduct by column D for each.
View 4 Replies
View Related
Apr 2, 2009
In Column B I have dates and in column C I have values correponding to the dates in B.
In Column J I have dates and in column L I have values correponding to the dates in J.
The first date entry in column B and J are equal but after that it is different based on a workday formula adding months, years, days etc. etc.
B31 = 06-apr-09 and J31 = 06-apr-09
B32 = 06-apr-10 and J32 = 06-Oct-09
B33 = 06-apr-11 and J33 = 06-apr-10
B34 = 10-apr-12 and J34 = 06-Oct-10
B35 = 08-apr-13 and J35 = 06-apr-11
B36 = 07-apr-14 and J36 = 06-Oct-11
J37 = 10-apr-12
J38 = 08-Oct-12
J39 = 08-apr-13
J40 = 07-Oct-13
J41 = 07-apr-14
As may notice column B adds 1 year to the previous date while column J adds 6 months to the previous date. (This is changing and B can add 1 month while J adds 3 months etc. etc.
I need a formula in column N that will look at the dates in column B and in column J and list them in column N in ascending order while not taking into account double entries.
View 9 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Jun 24, 2009
Basicaly what I am trying to accomplish is the use of a single cell to enter the values 1 thru 60, so starting at e2 for instance, if I enter the number 1 then cell f2 will populate with a 1, if I were to enter the number 18 then the cell w2 would populate with an 18. So the range of cells that need to populate in this example would be (f2:BM2) for row 2. Furthermore if I were to enter a -1 or a -18 in cell e2 then those numbers would be eliminated from the appropriate cells on row 2. The next 299 rows would need to perform the same way for a total of 300 user input rows.
The way that I'm imagining e2 would behave in the example would be...type a 1 then enter....18 then enter....31 then enter and so on. Columns f thru bm would locked and unselectable....so a tab should send me back to a3.
Reasoning.... this is a simple scoring system based on 60 codes and data integrity is very important and I want to eliminate as much human error as possible. I will be setting autofilters and such later on.
I am attaching a screencapture as well.
View 9 Replies
View Related
Nov 17, 2008
I want to lock cell after cell in a worksheet after data entry. Entering the data is what drives the locking of the cells. All cells with data are locked but those without are unlocked.
View 9 Replies
View Related
Mar 31, 2007
I have a table where the first column contains the date and the second column contains number of calls answered on that day. I have all the dates from Jan 1, 2007 - Dec 31, 2007 listed in the first column. I would like to be able to show the last date where data was entered at the top on my page where I have my Year-to-date running total. I would like the date to be automatically updated to the last datewhere data is entered.
View 2 Replies
View Related
Jul 31, 2012
I am attaching the example where I need to lock H2 to H1000, note that sheet is locked "anixter12 and I have also given range to user for modification I simply want to lock cells in H once date is entered.
View 3 Replies
View Related
Jun 22, 2009
Using 2003 - Is it possible to prevent cell data entry automatically creating a hyperlink for email/web url's. Using
View 4 Replies
View Related
Jan 10, 2007
I have been sent a spreadsheet that i need to extract the first 4 characters of the data in column C and put that data into column D.
View 9 Replies
View Related
Feb 21, 2009
How do I setup one "master cell" to be used as the permanent entry point for dollar values of all entries performed as needed....and have that value be automatically added to the cell of the month reflecting the day the data was entered?
I am looking to keep track of purchases on a monthly basis. (e.g. I have 35 receipts for today...I just want to grab one at a time, enter the total for each receipt in one cell and have it add the value to which ever month's value based on the day I enter it.
View 9 Replies
View Related
Jul 2, 2013
I have a scenario where a cell has to be restricted based on the user input of another cell, also it should allow only Yes or No values.
ex:column A
column B
pending response
submitted
User should be allowed to enter a value in column B as "yes" or "No" only when column A has a value "Submitted"
I referred the thread to restrict entering the data [URL]...
However not able to add list as well.
View 2 Replies
View Related
Jul 4, 2013
I've set up a binary matrix, such that I have 421 unique headings repeated twice: once in each column and once in each row (i.e., in the matrix the headings for row 5 and column 5 will trace back to the same description in the column headings and in the row headings).
I need to fill in 1s (case satisfied) or 0s (not satisfied) in this 421X421 matrix. Where my problem lies is in finding the exact row-column cell combination in which I need to enter the 1s. Descriptions that belong to the same group or category will be marked by these 1s in the matrix. For example, if I have descriptions 5, 9, 13, and 17 belonging to the same group I need to enter a 1 in each possible combination of these numbers: {5,9} {5,13} {5,17} {9,13} {9,17} {13,17}. I need a quick formula that will compute all possible combinations for inputted descriptions AND will enter a 1 into the cells, which correspond to these combinations.
View 14 Replies
View Related
Mar 14, 2013
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
View 2 Replies
View Related
