Force Date Format Entry In Text Box
Sep 5, 2007
A form loads and the first thing the user is to do is enter a specific date in a text box (preferably in, "mm/dd/yyyy" format.)
Is there any way to set up the text box so that when the form loads, the, "/"'s (slashes) are already in place? And can I set it up so that if the user enters in the date in any other manner aside from, "mm/dd/yyyy", that it will give them an error?
Finally, I want the user's date input to store on a worksheet (in row, "G".) So the first time the user uses the form, they type in a date and it stores the date in the FIRST AVAILABLE CELL IN ROW, "G." (example: "G1") The next time they use the form and type in a date, it is to store in, "G2", then in, "G3", ect. Each time they fill out the form, the new entry is to save in the next row beneath the previous entry.....
For other text boxes and combo boxes I have been using the following code to do this:
Sheets("Sheet1").Range("A" & intRow) = Text.Value (or Combobox.Value - depending on whether it was a text box or a combo box.)
Unfortunately I have NO idea how to apply this logic in regards to text boxes that are to store dates.
View 9 Replies
ADVERTISEMENT
Feb 9, 2007
I have a spreadsheet that I add to daily with 3 Columns that are always the same. Name, ID number and Phone Number.
Is there a way to make it so that when other people in my department use this that no matter how they enter the name, it is always formatted the same. No matter they enter the ID number and phone number they are always formatted the same. I've tried some variations of data validation but couldn't get to where I need to be.
Attached is a simple example.
I'd like the name to always be formatted as Smith, Bob
I'd like the ID Number to always be formatted as xxx xx xxx
I'd like the Phone Number to always be formatted as xxx xxx xxxx
View 9 Replies
View Related
Mar 15, 2007
I don't why the following code is not working. I am trying to force a date format when a user is trying to enter a date in anycell
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
If IsDate(Target.Value) Then
Application.EnableEvents = False
new_date = Format(Target.Value, "dd/mm/yyyy")
Target.Value = new_date
'MsgBox new_date
Application.EnableEvents = True
End If
End Sub
View 9 Replies
View Related
Apr 30, 2008
I'd like to import some dates into some textboxes on a userform.
I'm also going to let the user edit these, however... what i'd like is for the user to be forced to:
1) enter a date in the format dd/mm/yy
2) Enter a valid date (eg, not feb 30th)
View 9 Replies
View Related
Feb 6, 2014
I have a formula as follows:
Code:
=TEXT(A1,"Mmm YY")
Where cell A1 contains a date, say 01/01/2014.
For me this returns "Jan 14." However, I have a colleague using a Spanish version of Windows/Excel and therefore it displays this in Spanish as "ene 14."
How can I force the formula to return the English spelling, Jan 14?
View 2 Replies
View Related
Jun 7, 2007
I have a customised excel woorkbook that will be distributed to several locations with different computere systems, etc. I wanted to keep some convention with the naming, so I've put in a saveas routine to open the saveas dialog and change the default name. The user can then select the directory location and save the file.
Here's the
Sub Saveas_routine()
'
Dim strName As String
On Error Goto InvalidName
strName = "E-RAMP " & Sheet1.Range("A1") & Format(Now, " dd-mmm-yyyy") & ".xls"
Application.GetSaveAsFilename (strName)
Exit Sub
InvalidName: MsgBox "The text: " & strName & " is not a valid file name.", vbCritical, "E-RAMP"
End Sub
The problem is, when the save button is pressed in the saveas dialog, the dialog disappears and the the workbook doesn't save.
View 9 Replies
View Related
Jun 9, 2006
I have a macro which is designed to collect information and then assign each piece of information to a defined cell. I have Dim statements for each piece of information i.e.
Dim Info1 = Surname
Dim Info2 = Initials And so on.
Dim Info11 = Date of entry
This is working perfectly but the date when entered is reversing to american format. 08/05/2006 becomes 05/08/2006. Type into the cell manually and it works perfectly let the macro put the date in and it changes format. Can anyone supply a line of code that would format the date to dd/mm/yyyy? Then I could insert it after the part of my code which basically says go to this cell and put in the date.
View 3 Replies
View Related
Apr 5, 2007
way to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
View 9 Replies
View Related
May 30, 2008
I have an Excel sheet which serves as an input form. I would like to set something up where if the user inputs any value into the cell range B12:B100 then they are forced to also enter a value in column J of that same row.
Maybe something could be done where if they enter a value in B12, then they cannot enter a value in B13 before entering a value in cell J12?
View 9 Replies
View Related
Jan 16, 2009
I have a spreadsheet in which has many different cells that need to be completed if another cell has data.
Examples
If the user inputs a name into A3, they must complete cells B3 thru D3. Cells B3:D3 contain different entry methods including a drop down list.
On the same sheet, if the user chooses GTD from a drop down list in cell U3, cells BA:BJ must be completed. And if they choose GCI from the drop down list in U3, they must complete cells BK:BR
View 9 Replies
View Related
Dec 30, 2007
I want to change data through a user form and disable users from going around my form. I want users to see the underlying spreadsheet as the form manipulates data.
If I enable a form in Modal mode users can bypass the form. If I use it without modal form I can't change data from my form. I seem to be in a catch 22.
View 5 Replies
View Related
Mar 20, 2008
I'm designing a spreadsheet for users to enter the length of journeys that they've claimed on their expenses. In order to ensure consistency between users, I want to add two drop-down boxes or listboxes that will offer a list of common locations (eg. office A, office B, office C, customer A): one for the start point, and one for the finish point. These will be referenced by a lookup table that will automatically fill in the journey distance.
However, users will also need to be able to input other locations themselves (ie. if a journey starts at home, not at the office). If I use data validation to create the drop-down box, it will only allow the values on the list; is there something that functions like validation in offering the user a range of options, but also allows other values?
View 4 Replies
View Related
Jun 30, 2008
I am using Control Tool box combobox in worksheet.How to change the Combobox to Non Editable combobox?
View 3 Replies
View Related
Feb 16, 2007
Below is the existing code that I'm working with and would like to be able to make the ' name' column either Upper or Proper case on entry. I haven't decided which I'm going to use yet.
Set r = Sheet1.Range("A2:C65536")
If Not Intersect(Target, r) Is Nothing Then
sTgt = Trim(Target.Value)
If sTgt = "" Then Exit Sub
Select Case Target.Column
Case NmCol
If InStr(sTgt, ",") = 0 Then
iSpc = InStrRev(sTgt, " ")
Target.Value = Mid(sTgt, iSpc + 1) & ", " & Left(sTgt, iSpc - 1)
End If
View 3 Replies
View Related
Dec 30, 2007
I found the following code which works fine until I start to select multiple cells in cell B for deletion etc. At this point it throws up a run-time error 13 type mismatch, which will cause problems when other people start to use the spreadsheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 2 Then Exit Sub
If Target.Offset(0, -1) = "" Then
Target.Select
Application.EnableEvents = False
Target = ""
Application.EnableEvents = True
MsgBox ("You must enter Atlas Part No. first")
End If
End Sub
View 2 Replies
View Related
Jul 31, 2008
I need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies
View Related
Dec 14, 2011
I have a list box in a user form using R2:R3 as Row source.
I need to force the users to choose one of the items and not allow a blank entry to be entered.
I used the code below for the entries however it still allows for a blank to be entered into the Cell.
This part of the code works for Me.sapor = "" Or Me.jobna = "" Or Me.ordernu = "" But not for the next (2) list boxes it allows blanks Or Me.snd = "" Or Me.mcode = ""
Me.Snd and Me.mcode are list boxes.
Code:
If Me.sapor = "" Or Me.jobna = "" Or Me.ordernu = "" Or Me.snd = "" Or Me.mcode = "" MsgBox ("Feilds SAP Number, Job Name, Price, Code and Month Code Must be Completed")
Exit Sub
Code:
Private Sub CommandButton1_Click()
Dim rNextCl As Range
' Row count = where the select cell finishes and window box moves to rows over
' offset = howmany cells up or down from the row count
[Code]....
View 2 Replies
View Related
Mar 24, 2009
I have a date in H34, 21/03/2009.
In I34 I have the same date again, except formatted as MMMM YYYY so its showing "March 2009".
In G10, I want the cell to read: Number at end of March 2009, with the month and year being taken from the date range. To be honest, I can get the year okay using the Year() function but cant get the month as cant convert it back from a numeric.
View 9 Replies
View Related
Jan 10, 2007
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
View 9 Replies
View Related
Oct 6, 2008
Example......
In D2 I have: =B2
In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
View 3 Replies
View Related
Jan 17, 2012
I have these as input entered as text:
January 01, 2011 January 01, 2011 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010
but I need it in this DATE format:
MM/DD/YYYY
I need it as a formula to be entered into a cell in excel (not VBA)
View 9 Replies
View Related
Nov 8, 2006
Date:31-Oct-06 (the date is in cell A3)
Formula: "as at"& " "&A3
Result: as at 39021
I need the results to be "as at 31-Oct-06". Is there a formula for this??
View 2 Replies
View Related
Dec 12, 2007
I've created a group of user forms used for recording jobs and displaying details of jobs and have come up against a problem I think you may be able to help me with.
When the user creates a new record, I've written some code to stamp txtdate text box with the current system date and this information is then copied onto a sheet called Data into a specific column.
This part works fine and as the column is formatted to handle dates it displays fine.
However, when I pull the data back in, it displays the date as the serial number date, not formatted as dd/mm/yy. I've tried every fix I can find to sort this but none of them seem to work.
The code I use to pull the data in is as follows:
ComboBox1.BoundColumn = 11
txtdate.Value = ComboBox1.Value
The idea is that the user selects a job number from combobox1 and then the appropriate column is pulled into each txt box on the form.
At the same time, I'm trying to do the same for the system time as well. Unsurprisingly I have a very similar problem here and use the same code as above. I've tried formatting both date and time txt boxes in the userform, the data transfer code etc etc with no success.
View 3 Replies
View Related
May 8, 2008
Is there a way to make a cell display today's date as YYYYMMDD?
Assuming data!a2= 7989, I need the following formula to display as shown below
="txt"&data!a2&"txt"&today
displayed as
txt7989txt20080507
View 4 Replies
View Related
Mar 22, 2013
I have attached excel, where date is mention in B Column but when I am formatting it, it is not showing in proper date format. I want format in eg 18-Mar-2013.
Book1.xlsx
View 14 Replies
View Related
Oct 27, 2008
I have dates formatted as dd/mm/yyyy and I need just the year, but with either text or standard format. (so no easy yyyy solution which would work)
I just seem to be too stupid, can't copy and paste as value, as that doesn't change a bit. If I format it as text it turns up sth like 34875 ofc.
View 4 Replies
View Related
May 1, 2009
I have been sent an excel sheet, that contains a text column with a date and time format below
24/04/2009 1700
15/05/2009 2359
16/04/2009 1400
Is it possible to convert this into date & time to use in a calculation.
View 2 Replies
View Related
Feb 12, 2010
I am trying to display both text and a date in the same line. Currently I have something like ="The Date Is " & A1. where A1 is a cell with a date formatted in a preferred format. However, once I call reference to the cell, excel re-formats it into the serial date, so it displays something like. The Date Is 40220
instead of something like: The Date is 2/11/2010. Does anyone know how to format the number back into a date form? Just going through the format menus and setting it to date does not change it.
View 2 Replies
View Related
Feb 12, 2014
I have a userform with a number of text and combo boxes. One textbox is called ("txtDate").
I would like the ability to type in "1-10" and have the textbox display "Friday, January 10, 2014".
There is also a command button that enters the data to a sheet in the workbook.
View 5 Replies
View Related
Jun 9, 2014
i am looking for vba macro to convert date format (indonesian language) to be text format, see this below :
sample (col.a)
after vba
09/10/14
09 Oktober 2014
26/12/11
26 Desember 2011
05/06/10
05 Juni 2010
etc...
View 6 Replies
View Related