I need to know the line or two of code to disable the
FILE and CLOSE buttons to force saving to the same file.
I know they exist, because I obtained and tested them in
an excel sheet, but somehow managed to lose the code
and the link from which I obtained them.
I am trying to save my workbook to a file on my shared drive.
When I change the default save location in the options menue it works fine for the first instance but when I return and open the file ... even the one from the shared drive it faults back the C: drive location on my laptop. My excel version is 2010 and my code for file name is below ... I just dont know how to force the path/destination in VBA
Code:
Dim namefile As Variant
With Worksheets("Panelas")
namefile = .Range("V3") & "_" & .Range("C5") & "_" & .Range("P3") & "_" & Format(Now, "yyyy-mm-dd") & ".xlsm"
End With
namefile = Application.GetSaveAsFilename(namefile, fileFilter:="Excel Files (*.xlsm), *.xlsm")
[code]....
When you click File>Save As, you get a save as window that shows the current file name to "Save As"
I would like to create a macro that shows the values in a couple of cells (lets use Range("A1") & Range("B2")) instead of the current file name.
I've looked through the threads and have seen some Save As posts, but nothing that seems to fit my task. All I want to do is force the Save As file type to .xls (for some reason on our network, xlsm causes save errors... After looking through various posts, I found this:
VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Not SaveAsUI Then
Exit Sub [code]....
The problem is this causes the Save As dialog box to show up twice... How I get the Save As dialog box to show up once?
I have created a tool in excel to facilitate different requests from our sales force. A drop down list in the first worksheet lists the request types. Once the type is selected the user clicks a command button that sends the user to the corresponding worksheet specific to the request type.
My problem is that I need to verify that the cells on the specific worksheet have all been completed. I tried to verify when saving in the workbook module, but I don't know how to only check the selected request worksheet.
One thought was to insert save command buttons on each worksheet and only allow saving through those buttons. (So I would need to remove any saving functionality from the file menu/toolbar.) Then I could attach the verification code to that button on each worksheet. Preventing saving until the requested data was entered.
If this methodology will work I need to know how to do the following:
1) remove alternative saving methods
2) Once those methods are removed, how do I code a command button to check that specific cells are not null and then "save as".
3) if cells are null then, stop save and show msgbox.
I am working in Excel 2003.
I have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
I've created a file where our accountmanagers can mace price calculations. But eversince i've added a macro to force them to fill the form completely, they have gone and tried to hack the macro (and with succes).
I now would like to add a protection for the macro, so they can only access VBA when "sheet1" is unprotected. How can i do this?
I also would like to create a macro so they only can save the file as a Macro Enabled Excel file (.xlsm),
how can i do this best? .....
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View Relatedam using Excel 2010 and having issues trying to save a worksheet to a specified file location with the save date....
I have tried several posts form this forum and elsewhere and can't seem to get the macro to do what I want.....
I want to save a 'worksheet' from an open workbook that I use for updating information to the same file path as the workbook with the date the file saved...
What I am trying to do is that I have an excel file with macros and it is a read-only file. In order for the user to save, I want them to only be able to save as a .xlsx file as it disables all macros. If for whatever reason, the user wants to save the file as another .xlsm file, they should be allowed but before they save, a "are you sure you want to save as .xlsm?" message should pop up.
All the options in the save as box should still be available in case they want to save in that particular format. Just that the .xlsx should be the default.
I have a macro that copy one sheet of the Active workbook and sends it via email.
I need to add a code in this sheet so when one opens it from the email, with a command button to be able to save the file to specific, fixed folder on the local network with it’s original file name.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I have a spreadsheet where I want to require certain fields to be completed then I want to have that file auto emailed. I have learned that I do need to have the file saved before sending otherwise the data will not appear in the email, so with this I want to have the file temporarily saved emailed then the temp file deleted.
Here is the code I have so far but it errors on the blue text, I did change the TempFileName from = "Copy of " & wb1.Name & " " & Format(Now, "dd-mmm-yy h-mm-ss") to = [C16] & "_" & [B6] & "_" & [D6]
Private Sub CommandButton1_Click()
If Range("B6").Value = "" Or _
Range("d6").Value = "" Or _
Range("f6").Value = "" Or _
Range("E9").Value = "" Or _
[Code] ......
A co-worker of mine is exporting files from Quickpen as excel files, but every time he names the files with any Uppercase letters in the files name, they are automatically changing to all lower case. Even when he tries to rename the files, they will not stay with any uppercase letters....I have searched all over and cannot find a solution. If he sends ME the file, I can open it in excel and save it with any cases.
View 2 Replies View RelatedI have a Workbook that already has a macro in it that will generate multiple sheets based on certain criteria.
For each of these newly generated sheets (numbered 1-6 in the attached example), I need to be able save each of them to a PDF file based on a unique name contained in a certain cell (in this case, each named is referenced in cell Q1 of each sheet). As such, I should end up with 6 pdfs based on the attached sample files.
The PDFs would ideally need to be landscaped and should be just 1 page per sheet.
In my attached sample workbook, you'll notice that I have a "PracticePrint" macro that doesn't quite get the job done. One other criteria involves not printing any sheet with the characters "1010" in it (my PracticePrint macro is setup to do that, but it fails to do much else).
I have a macro which successully saves a worksheet as new file to another file path....(below)...but I can't figure out how to close this new file and return to the original file...
Dim myPath As String, fName As String
myPath = Sheets("Date").Range("C8").Text
fName = Sheets("Date").Range("C9").Text
Sheets("Sage CSV File").Copy
With ActiveWorkbook
.SaveAs Filename:=myPath & fName
End With'
I have written the following simple macro to import some data into a worksheet and then prompt the user to save the file in Excel 2003 format (the system to which we will upload this data does not accept formats later than 2003). The template is in "*.xlsm" format.
The code executes without error, but when the user hits the "Save" button in the "Save As" dialog box, nothing happens. The "Save As" box closes, but no file is saved.
Code:
Private Sub cmdImportData_Click()
Dim sFName As String
'On Error Resume Next
PrepData
CopyData
FormatColumns
'prompt the user to save the file in "*.xls" format
sFName = Application.GetSaveAsFilename("upload", "Excel files (*.xls), *.xls")
End Sub
How can I set the SAVE AS file name to equal A1's cell contents? (More specifically, when I need to rename an existing open file and place my cursor in A1 and hit Save As, I need to new file name to automatically populate A1's cell contents so I don't have to retype the contents of A1.)
View 1 Replies View RelatedHow can I save worksheet from existing workbook as a new workbook with extension .xls or .xlsx depending on the version of Excel on which the original was opened and no matter the extension of original?
My code that I was trying to create all above does not work, because even if I am using Excel 2007, 2010 or 2013 it will still be saving only as .xls.
I want to create a macro that will select all the worksheets (names and quantity will vary) and saves the file as the current file's name but in PDF. Since I only know how to record a macro it specifies the worksheet names but I need it for various workbooks. The name will vary plus the number of tabs can go anywhere from 3 to 40.
View 9 Replies View RelatedHow to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................
I presently have a macro that, when run, takes to conents of C4 and C6 and saves a new version of the file being worked on into a folder on my desktop. I love the macro with the exception of one part: I don't want to be prompted to overwrite the file if it already exists. How can I change this macro so that, when pressed, it overwrites the file without prompting the user and waiting for their answer?
Here is the current
Sub SaveIt() ...
My macro pulls data from a set of files in a folder and creates an output based on my formatting rules.
Ran into 2 issues though. The first being is after this macro is run it saves a file in the folder with the name "Data Export" and before I had it do this if "Data Export" was already there
Code:
'Check if file name to save exists If Dir$(vFolder & "" & sSubFolder & ".xls", vbNormal) = "" Then
wb.SaveAs vFolder & "" & sSubFolder & ".xls"
MsgBox "Complete!", vbOKOnly
Else
MsgBox "File already exists, could not save!", vbInformation, "COMPLETE!"
End If
What I want it to do instead is change itself and save it as Data Export A, and then also loop for A each time, if A is there go to B , so on and so forth.
-Alternate solution if this is way to challenging, can I have it pop up the Save Message box to let the user try a new name if "Data Export" exists. I was trying to think through that too..
2nd Issue is when I loop the files in the folder I selected in my macro, I want it to ignore "Data Export" files. Before I just took a shortcut and had it save outside of the data folder, which was fine but now we are running on so many files a day that we need it inside the same folder for organization purposes.
That is done with the following
Code:
'Loop through files in folder sFileName = Dir$(vFolder & "")
Do Until sFileName = ""
I was thinking maybe I can add an error handler to the loop? Before Do Until? Something like this? But how I can add it into the loop?
Code:
If sFileName Like "????.?.xls" Then
I am trying to create a macro to run from a form button, within a report, to save a file to a variable file path and name depending on the date value in cell B5.
The format of B5 looks like - 13/08/2014 16:39
The file path has folders for each year in format "yyyy" with each year having sub folders for each month in format "mm".
The file name is just the date only and is formatted "dd.mm.yy" e.g. 13.08.14
I have tried the code below in various permutations but always end up with an error - Method 'SaveAs' of object '_Workbook' failed.
[Code] ......
I have an excel workbook that uses a .bmp file [a picture]. The master excel file and the .bmp file are in the same directory on the network. The excel file is "Read-Only", so the user would open it, customize it and save it on their own computer or somewhere else on the network.
They are only allowed to save it under "Save As". Once the user saves it, they would then be able to use their customized copy for future updates etc. The problem is that the .bmp file is missing from this new directory.
Is there a way to automatically save a copy of the .bmp file under the Directory specified by the user, so it's always available when the Excel workbook is opened? Or is there a way to attach the .bmp file to the excel file, so they are always saved together?
There are two excel files abc.xlsm and xyz.xlsm enclosed. download these two excel files to your desktop. Then open abc.xlsm and run following code.
[Code]....
After running code above you will see that you have a new file in your desktop named xyz.rar. Everyhing is okey until now.
Now, delete abc.xlsm, xyz.xlsm, xyz.rar from your desktop. Then download enclosed file named klm.xlsm to your desktop. Then open klm.xlsm and run following code.
[Code] ....
After running code above why there is no klm.rar file in your desktop? Is it not possible to create a zip file running code includes same workbook? I mean why I cant zip excel file, from same excel file?
Attached Files :
klm.xlsm‎
xyz.xlsm‎
abc.xlsm‎
What I would like to do is to open an excel workbook from a bat file in dos with one arguement.
so something like
start c:lacklist.xls 2315t
Once the blacklist.xls is opened I would like to have the macro to save the excel file as a csv file ignoring all the prompts and use the argurement 2315t as the directory to save it to on the j drive ie save to j:2315tlacklist.csv. Then close the workbook and continue with the rest of the commands in the bat file.
I'm guessing I have to use GetCommandLineA to read in the arguement but I can't find anything on the net that gives a clear explanation of how to use it.
I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
View 5 Replies View RelatedI am trying to prompt the user for the directory to be saved in and file name to be saved as; then save the workbook in the input directory with the inputted file name.
View 3 Replies View Related
