Is there a way to change the format of a value stored in a variable without inputing it onto a worksheet first? (i.e. if I have a number stored in a variable, and I want to format it to have commas and dollar signs)
View 4 RepliesCell C9: 1.25773
Cell C10: 20.0
Cell C11: 2.25%
Cell C15: =C9+((C10*C11)/10000)
C9 is a user entered value, currently formated general
C10 is a user entered value, currently formated decimal with one decimal
C11 is a user entered percentage, currently formated percent with two decimals
C15 is a formula calculation, currently formated general
I've tried formating cells to general (and/or) text and the values appear to be correct but still don't show what I want.
The most popular entries for C9 will be:
123.12
123.123
1.1234
1.12345
Any of the above could have one or more trailing zeros.
I would like C15 to show the same amount of decimal places that the user enters in C9. If user enters one, two, three, four, five, etc...decimal places in C9 then show the same amount of decimal places in C15 after the calculation is done and include any trailing 0's that are needed to match the number of decimals in C9.
I've tried different If statements with custom format to try to get the format of C9 transfered to C15 but haven't come across the right way to do this.
I am entering values in columns AV and BD of the attached spreadsheet. Rather than manually editing each value to adopt the decimal place value of the adjacent cell is there a formula that can achieve this before the value is entered? The decimal place values are determined using a VLOOKUP table (column3) on the NES tab.
View 2 Replies View RelatedIs it possible to store format of a sheet in a variable?
I have one sheet. i want to select all cell. then copy the formatting of this sheet(template) in a variable. is that possible? does variable need to be a clipboard? if it is in clipboard how to reference it? i.e if i have two or three formats stored in a clipboard how to select and paste the second one?
once i store this in a variable, i will paste in new sheets(about 50 of them) so that all these new sheets have same format as the template.
what is the easiest to do that?
I have two sheets of data, exported by a program. The first sheet uses a single row for information of each log entry. The second page will have 1 to X rows for information of each log.
What I am would like to do is combine that data into one cell, and place it in the corresponding row on the first page. This will be used in a mail merge, and I would need commas and an "and" between the data points, where appropriate for proper English. I know how to get the data together, but am having issues trying to get the correct grammar within the cell.
Willing to use either VBA or other formulas.
I am still a novice in you standards, but have run into a problem and hoping you all will have some insight for me.
I have a workbook that I am parsing data from the first sheet and putting the data onto the second sheet. Before I place the values in I want to format the cells with boarders, colors, alignment, and in some cases validation (but I can worry about the validation later).
Currently what I am doing is using a 3rd page that has a group of cells that have the formats I want in place before I start. The code will then parse the data and when it finds the data I need go to sheet 3 and grab a range of cells and paste those cells to sheet 2 and then write the data over those cells. This allows me to format the document as I create it.
The problem is that I am going through 25k of lines and on average this function is running 40+ minutes. If I run the same script with out the formatting it only takes at most 2 minutes.
So on to the question.
Is there a way that I can start of my script by grabbing all the format information before I parse the data and save it as a variable? Then instead of doing a copy of the format it would just apply the formatting that is saved already. I would think this would be much faster of a process.
I'll get straight to the point:
where ( Date > 9/20/2007)
The above Date si used in a sql select statement where I'm hard coding the date (9/20/2007). This date is actually located in sheet1, cell E1. How can I get it from that cell and use it in my Select statement instead of entering the date manually every day in my code?
The following code stops at the red line with "Method 'SaveAs' of object '_Workbook' failed.
FF="xlCSV". It works fine if I replace
Code:
FileFormat:=FF
with
Code:
FileFormat:=xlCSV
Code:
Sub SaveIt(FileNm, FF)
Dim FSO As Object, a
Set FSO = CreateObject("Scripting.FileSystemObject")
If FSO.FileExists(FileNm) Then FSO.DeleteFile FileNm
If FSO.FileExists(FileNm) Then
[code]....
The code below is for a macro that allows the user to create a list of contacts. The column containing the names of these contacts are then referenced by a userform (code not present) by way of a Named Range. I want to update the named range whenever the user adds another contact so this new contact shows up in the user form.
I am currently referencing the range containing the names using R1C1 style, but I cannot get the variable aspect to work correctly.
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedI'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
View 3 Replies View RelatedI Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long
'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
lRow = rFoundCell.Row
lCol = rFoundCell.Column
End Sub
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
End Sub
I am getting error in Set MyRange
[Code] .....
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies View RelatedI attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View 7 Replies View RelatedI am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have
shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value
I want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.
Here's the code
Code:
Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer
[Code]....
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.
Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh
End Sub
I am getting an error at this line:
Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))
Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................
I have a spreadsheet form with all kind of values and what I want to do is to find a data in a worksheet named "Config" based on the spreadsheet activecell value. With the find row adress I return data of another column but same row (in the worksheet) in two diferent label captions. If the spreadsheet activecell value it was found in the worksheet everything is ok but if the value is not found I'm getting the message "Object variable or with block variable not set"....
View 7 Replies View RelatedSay you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
Function Find_Range(Find_Item As Variant, _
Search_Range As Range, _
Optional LookIn As Variant, _
Optional LookAt As Variant, _
Optional MatchCase As Boolean) As Range
Dim c As Range
If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas
If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole
If IsMissing(MatchCase) Then MatchCase = False
With Search_Range
Set c = .Find( _
What:=Find_Item, _
LookIn:=LookIn, _
LookAt:=LookAt, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=MatchCase, _ ........................
Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks
I've got a simple Macro which manipulates data in various worksheets. Problem is that I get the error: "object variable or with block variable not set" in the area of the code that I have put in bold below:
All I'm trying to do in this part is find the first occurrence of the #n/a value ....