I would like to use the following line to calculate the formula,
In the format i have already specified.
But to leave the values in the cells apposed to the formula.
This way when i delete the source sheets the results will still be left as values not formulas.
It can probably be done in 3 lines but i have to do this for 9 different rows so was wondering if there is a way of combining the three tasks into one row
I dont know the correct terminology with whick to phrase my question, but I would like to know if its possible to copy say columns A-J on "worksheet A", and copy columns A-J on "worksheet B", each of which have different column widths, and paste them both to "worksheet C"?
My problem is columns A-J on "worksheet A" are perfect and copy and past fine to "worksheet C". But when I copy columns A-J from "worksheet B",which have different widths, and paste them to "worksheet C" right below what I had previously pasted from "worksheet A", the column widths interfere with each other.
I have tried a special paste, and it seems to re format everything above the current page its pasting?
know while doing paste special whether we can copy the data in reverse manner instead of regular pattern. Here, I would like to explain my query in detail.
As you all aware that we use paste special command for multipurpose requirements such as breaking the links/transpose etc. But, here I need to copy the data from last row figure as first in the same context first one as final.
Ex: if Data is 123456 and if we paste the data by using paste special, data will be same may be in in row /column. Here, I wanted to copy the data as 654311 which means reverse. Hence, kindly guide me whether is there any command/formula for doing the same.
I use the following formula to count unique values within a group for a pivot:
=IF(SUMPRODUCT(($CO$2:$CO55681=CO55681)*($E$2:$E55681=E55681))>1,0,1)
When I paste values over the formula it takes around 1 hours to do the 70k cells which is excessive. I want to know if there is a way to speed it up?
I tried doing an =cell and then paste special that and it works really fast but when I delete the actual formula's again the whole sheet locks up.
I have a column of numbers, in the next column I have a formula =left(a1,len(a1)-2) which chops off the last 2 digits of all in column A. when I copy the values from column B and paste special them as values they come out with an error "Convert to number". converting 20,000 cells can take some time. Is there a way that I can paste them to automactcally be numbers?
View 3 Replies View RelatedI have a workbook with ~80 sheets. One sheet is a summary sheet containing data from each of the other sheets. The formula to display the data is pretty easy, but I need a function to copy the formula but increment the worksheet reference in each cell.
For example:
the formula in one cell is ='17'!$AI$6
The next cell should be ='18'!$AI$6
and so on...
I have about 12 columns like this, so I really don't want to edit each of them individually.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
my destination cells will have formulas like:
='E:My WorkTestData[CCC.xlsx]Input'!$S$31
Everything works fine. But I don't want the destination cells to display the full formula, but the actual Value only
I thought of a way to build a script that first builds the formula to one cell then Copy Paste Special value of that Cell to my desired Cell.
But when the code runs The cursor moves back and forth all the time...
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
copy content from particular cells in the current sheet to the next available row in another sheet. I need to Paste the Values as the cells I am copying are equations. It was working great until I tried using it again today. For some reason I get the following error:
Run-time error '1004':
Unable to get the Select property of the Worksheet class
Here is my code:
Code:
Sub CopyCampaignMetrics()
Range("A2:E2").Select
Selection.Copy
Sheets("Sheet2").Select("A" & Rows.Count).End(xlUp).Offset (1)
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
How would the code be changed below to be Paste Special Value?
The numbers copied are changing every few seconds and I want a snapshot of it.
im TheRow As Integer
Sheets("Loader").Range("C5:AC5").Copy
TheRow = Sheet2.Range("A100").End(xlUp).Offset(1).Row
If TheRow < 6 Then TheRow = 6
Sheet2.Cells(TheRow, 3).PasteSpecial
If TheRow = 6 Then Range("B6").Value = 0 Else Cells(TheRow, 2) = Cells(TheRow - 1, 2) + 1 / 24
Cells(TheRow, 1).Value = Date
ActiveWorkbook.Save
LastSoon = Now + 1 / 24 '1 hr from last time
Application.OnTime LastSoon, "Capture" 'set up for next hour
I have the following in my Workbook
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
'If you have any worksheet to exclude
If Sh.Name = "Sheet2" Then Exit Sub
With Target
If Len(.Value) Len(Trim(.Value)) Then
MsgBox "You just entered a leading space character in" & vbCrLf & _
" cell " & .Address(0, 0) & "." & vbCrLf & vbCrLf & _
"If you intend to delete the value in that or any cell, " & vbCrLf & _
"please press the Delete button on your keyboard.", 16, " No leading spaces allowed !!"
Application.EnableEvents = False
.Value = Trim(.Value)
Application.EnableEvents = True
End If
End With
End Sub
When I tried to Copy>Paste Special > Formats or Values of more than One row this line highlights
If Len(.Value) Len(Trim(.Value)) Then
That is, if I select C3:Q3, Copy, then select C10:C15 and try to do a Paste Special that is when it gives me an error 13: Type mismatch.
If I just select C10 and do the Paste Special, it's just fine.
I am trying to write a VBA code which will add any figure (say X) to the visible cells in the selected range. I am mentioning the visible part becuase my data might be filtered and thus. So far I have been able to figure out the following code(by recording a macro and then going behind the scenses to see the code):
Sub Add_X()
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlAdd, SkipBlanks:= _
False, Transpose:=False[/color]
End Sub
The problem is that how can (if possible) I can pass a parameter to the above code (which will be X; as explained above). There might be many possible solutions??? However one that comes to mind is that when I selected a range of cells and then run my code, a dialog box should pop-up and ask for a # and then then take that # to add it to the visible cells of the selected range.
Is there a way to only allow paste special values or formulas within a cell? People are coping and pasting and screwing up the formating
View 2 Replies View RelatedI would like to know if it is possible to format a cell where you enter a date (08-02-2009) and it returns "08-02-09 thru 08-08-09" that weeks date range in that cell.
Format custom mm-dd-yy " Thru " mm-dd+6-yy
I know will not work but is there a way to do this??
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedI have some simple Macro code that works fine for the COPY side of the action...
View 14 Replies View RelatedI have a macro that copies the main report sheet in my workbook. The point of the macro is to get a copy of the report data without allowing anyone to see the formulas/data behind it - when it pastes, it pastes only the values in the tables and then copies the charts, deletes the live ones, and pastes only the images back on the sheet. The macro works on my computer and my partner's computer, but not on anyone else's. It stops at this point:
View 5 Replies View RelatedDuring the execution of some code I come to a point where the properties of a range of cells needs to be converted to numeric (is at that point text).
Normally I do that by adding a 1 in an cell nearby and use the copy/paste special method.
I was wondering if I can do that in a different way.
Is it possible to define a MultiplyFactor as 1, and use this in paste special part.
Something like: .....
I've got a sheet which has two column headings - Resources and Cost. I have another sheet which has the calculations for both of these. They are in cells H24 and D29 of the second sheet. I want to have a macro on the second sheet that if I click it, it will paste special these two figures (values only so no formulae), into the active cell on the first sheet. This is the code I've got so far but every time I run the macro it just pastes into the same two cells in the first sheet.
View 4 Replies View RelatedWorking in one workbook, I am using sheet 1 as a master form and copying it to the back of the workbook and renaming it.
View 3 Replies View RelatedI have the following macro and it keeps coming up with syntax error.
Sub CopyIt()
Dim LasteRow As Long
Dim LastaRow As Long
LastaRow = Sheets("Sheet2").Cells(Rows.Count, 1).End(xlUp).Row
LasteRow = Sheets("Sheet2").Cells(Rows.Count, 5).End(xlUp).Row
Application.ScreenUpdating = False
Sheets("Sheet2").Activate
Sheets("Sheet2").Range(Cells(2, 1), Cells(LastaRow, 1)).Copy
Sheets("Sheet1").Range("A2").PasteSpecial Paste:=xlValues,
Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sheet2").Range(Cells(2, 5), Cells(LasteRow, 5)).Copy
Sheets("Sheet1").Range("B2").PasteSpecial Paste:=xlValues,
Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
Sheets("Sheet1").Activate
Application.ScreenUpdating = True
End Sub
It happens when it comes to the paste special bit on book 1.
In the new 2007 version , can a specific hot key be created to perform Past Special Values? This key assignment was available in 2003, but we can't find it in the new 2007.
View 9 Replies View RelatedI am trying to come up with some VBA to paste special value an entire workbook.
View 9 Replies View RelatedI just want to find out what formula could make a function "copy paste special value"?
View 9 Replies View RelatedI have the following code in a macro which works fine. Is there a way to shorten the code down to 1 line?
Sheet2.Select
Range("C2:F2,H2:J2,N2,P2,R2,T2,W2,Y2,AA2").Select
Range("AA2").Activate
Selection.Copy
Sheet9.Select
Range("B3:O3").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I would like to use the code in a Select Case Statement & the above code is too cumbersome.