I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
=average(b1:b1+n5)
Here is my problem. I have a a workbook with 2 sheets.
Sheet 1= Data sheet; Sheet 2 = Table
On sheet 2 I want to copy down an entire row (A8:AH8) but the problem is that the number of copied rows depends on the number of rows contained in sheet 1 column A (-1 row)
So if i have 101 records (100 +label) in column A sheet 1, in my sheet 2, it must copy down the formulas from (A8:AH8) until (A107:AH107)
A
B
1
AAPL
MSFT
2
='C:Documents and SettingsSASTCMy DocumentsStock Data[AAPL.csv]AAPL'!E2
='C:Documents and SettingsSASTCMy DocumentsStock Data[MSFT.csv]MSFT'!E2
How should i COPY automatically "XYL" written as in formula (XYL.csv and XYL') comprehending with the top bar?
Tried "&C1&" but it`s not working.
I have below code (option 1) I was hoping would do what I need except instead of copying formula from A1 it copies values... (option 2) copies formula but does not preserve references...any ideas how to copy exact formula so that references are not changed?
Assumptions:
A1 formula = SUM(B2:E2)
in A5 I would like to copy exact formula to keep references to row 2...
I agree I could use $ in original formula but that would complicate other requirements.
OPTION1:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
Range("A5") = vRange1
End Sub
OPTION2:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
vRange1.Copy
Range("A5").PasteSpecial
End Sub
I have the following code which Clears the content of a cell. The next thing I want to have happen is to have another cell equal a formula but make that formula relative to its place. The formula is the following =IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))
I am not sure how to paste it where the row changes depending on where it is pasted. Here is the code that does not work...
Private Sub CommandButton1_Click()
Worksheets("2008 Log").Select
Dim cRow
cRow = ActiveCell.Row '
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Cells(cRow, Range("column_duration").Column).value = "=IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))"
End Sub
As you can see, no matter where I paste it it will always refer to row "F". How can I have it refer to row "cRow"?
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedI tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedThere is an text string and I need to copy it to Windows clipboard to have a chance to use it later anywhere by Ctrl+V.
Simple, isn't true? But how to do it?
I have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
Into Sheet1 there is in A1 (or should i call it better R1C1) a value which is update every sec from i timestamp cell.
If the value of this cell change i want to put the previous value into A1(can be another) cell of Sheet2 and keep the new value into A1 of the Sheet1
When the value change again i'd like to put it underneath the cell A1in Sheet2, so that i can take a history of the values.
So there will be a column A with different rows.
Every 3 mins i want change the column into Sheet2 so from A now the values will be update on column B
Everything will start when i open my excel file, because the timestamp will start to run.
What about if i want to align the change of the column with a particulary hour?
for instance
if i open my excel file at 9.33am everything will start since that time, but what if i want make it start from (a multiple of) 9.00 am (so every 3 min from 9am?
A text file is imported to Excel Worksheet. I use this code to Select/Copy a section of that import;
Selection. Offset(4, 0).Resize(15, 9).Select
Selection.Copy
'The number 15 would mean there are 15 rows of items.
But there are not always 15 rows. There might be 18 rows, but because the code is set to 15 it will miss selecting 3 rows preceding, or if the code is set to 12 it will not select the full item list. However, whatever the amount of rows of items, be it 15,2 18 or 100 for example, directly under the item amounts is a "marker" purposely put in the file before the import for other search functions.
Above that marker is the total Item count! So I need a code to search for that marker, then move up 1 cell and whatever that number is, if "15" would then determine the correct row count to Resize
The "marker" is : ^3^
So the full code is:
Macro1 ()........................
I need to copy cells M6 to S6 down to all rows in a worksheet. The columns will remain M to S. The number of rows however vary in each worksheet.
How do I get the macro to read "End Down" with varying number of rows. I will need to do other functions also using "End Down" so if possible is there a generic code for this.
I want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
I'm trying to work on a macro that will copy two cell ranges (name of current month and prvious month) from one location, store it as a variable and use that variable to find replace similar text string in another tab. Below is my code which is not changing the values in another tab...
Dim OldMonth As String
Dim NewMonth As String
Sheets("X1").Select
[Code]....
Using a macro, how do I tell Excel to:
1. Copy the xth row and paste it before the yth row
2. Copy the mth column and paste it before the nth column
3. Copy the cell a,b and paste it in he position c,d
where x,y,m,n,a,b,c,d are variables, the value of which the user inputs, say in cells A1, A2, A3, A4, A5, A6, A7 and A8 respectively.
In other words, I need to read numbers m and n which are the values of cells A1 and A2, then I need to go to column number m (for instance, if m=4, I go to column D), copy the whole row, go to column number n (for instance, if m=6, I go to column F), and insert the copied column.
Also wondering if VBA provides any way to quickly horizontally and vertially flip copied tables while pasting. While I am aware of the transpose function which swaps rows with columns, I am looking for a way to reverse the order of either the rows or the columns as per my need, without having to copy-paste row-by-row or column-by-column.
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
My data looks like this in one sheet:
A
2
B
C
D
1
E
F
3
G
H
I
Where A is associated with 2 other letters, B and C. D is associated with one other letter, E, and F is associated with 3 other letters. I want an automated way to paste this into 2 columns in a new sheet, like this:
A
B
A
C
D
E
F
G
F
H
F
A
2
B
C
D
1
E
F
3
G
H
I
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedI have a bit of a curly one - I have a sheet with 9,000 records that I need to expand to 24,000 + on a separate sheet records using the following method:
1) Select and Copy entire row 2 from sheet(1)
2) Insert a number of new rows into sheet(2), based on the value of cells(2,8) or cell H2. Column H contains quantity values for each of the 9000 rows which are variable.
3) Repeat for row 3, copying and inserting into sheet(2) based on the value of the cell in H3.
4) loop through all records until complete
I have tried writing the code in VBA but am not even getting close!
I am working on a macro where I am creating a formula to string together some text columns and then copy the formula down the entire column. The data source I will be performing this on will change in number of rows period to period. The data would be in columns A,B & C and the formula is in D. The formula in D is stringing together the data in AB & C and then I want to copy and paste that formula down to the bottom of all of the data. What would the code be for the copy and paste with variable rows?
I'm trying to enter the = sum formula using vba with one of the ranges in the formula being a variable. Can not seem to get the following to enter the formula correctly.
Last_cell_4 = Range("A4").End(xlDown).Offset(0, 3).Address
Last_cell_5 = Range("A4").End(xlDown).Offset(1, 15).Address
Range(Last_cell_4).Offset(1, 0).Formula = "=Sum(D4..Last_cell_5)"
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1".
I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click()
If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then
Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy
Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone
End If
End Sub
What I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.
I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.
I have a data set which is structured such that there are variable numbers of products (column A) from 1 - 48 and these repeat multiple times for each "Name" held in column B. I have attached an example of this which uses a data set with 7 entries reapeating 7 times.
I need excel to insert 2 formula for me multiple times which needs to varry according as follows
1. Calculate the average value of data in Column C - G for n cells starting at a specific cell (C2), I have inserted an example of this and highlighted it in yellow. This then needs to repeat down column C several times, the number of times this will repeat depends upon the number of different names held in column B. But I have this calculated already and stored in a cell im my main document.
2. Calculate the variance of each value in the x cells above from the average calculated in point 1 above. I have highlighted this also in yellow.
I'm using Excel 2000/2002. I have a workbook with 12 sheets named Jan, Feb, etc.
I want to add a new sheet (Report) with formulas in various cells to get data from a cell in a particular sheet.
For instance, in a cell of the new sheet is: =Jan!D64. I want the user to be able to select a month from a drop down list and for the formula to change sheets depending on the month selected. The formula should be: =(sheet name!)D64. I tried playing with INDIRECT, but maybe couldn't get the syntax right. I can't use macros, the Excel is on a server and they are not permitted. The end user is less knowledgeable in Excel than me.
Adjust this piece of code:
[Code]....
The lookup is for 00.2014, but this is to fixed. Want to use the same code next year to. So I already defined the variable 'jaar' which the user can choose with a validation. (and next year they set it to 2015).
I thought this code would do it but no luck:
[Code] ....
So what would be the correct way? Been shifting with the " " but its only make more and more mess.