I have dates in column A a6:a5000. I need a formula to add a remark "Today" in column B for the current date. In short the remark in column B should display the remark "Today" for the current date daily. The dates in column A are in 'DD MM YYYY'.
View 2 Replies
I have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
this is my first post and i was a little unsure as to whether to put this in the General or VB/Macros forum, because it kind of involves both.
i'm trying to write a macro that inserts a formula that uses the date of the day that it was run (that is, i don't want it to be volatile like TODAY() and NOW(), but i don't want to have to manually type in the date into each formula).
is there a way that i can write a formula that uses the date of the day it is entered into the cell, or write a macro that adds today's date (perhaps using ActiveCell.Value = Date) and then writes a formula around that?
Looking for a little help with the following formula =CONCATENATE("August 07 -",TODAY()," Evening Instructor") After entering this formula today is displayed as a serial number. I'd like it to display as current month/current day/current year (11/28/08)
View 2 Replies View RelatedWhat i have in cell D3 is the formula 'Today ()' to show the date formatted like so. January 2012.
In cells B1,B4,B7,B10,B13,B16,B19,B22,B25,B28,B31,B34 are results showing targets for set each month of the year (B1=January, B2=February etc). What i want to do in cell D4 is show the target for the month that we are in, in other words the target for the month showing in cell D3.
I cells B5:B15 I have a list of dates from last year. I need a formula that I can put in cell D5 that gives me the date that is closest to the same day last year.
Example:
If today is 4/9/14
and
From B5:B15 there were the following dates:
3/12/13
3/19/13
3/29/13
4/5/13
4/8/13
4/12/13
5/6/13
5/29/13
Cell D5 would contain
4/8/13 since it is the date closet to same day last year.
I have 2 columns in my spreadsheet:
B:B is a column of dates.
C:C is a list of names
formula that will count the number of times the name 'SIMON' appears in column C:C but here is the catch: I only want to know how many times that name has appeared over the course of the previous week. IE NOW - 7days
I am trying to create a formula that will count days since an incident. Column A will have each day of the year in it Column 2, I would like to have 0 in it for each day In the event of an incident, I will replace the 0 with a 1 - but this should only happen on the date, rather than be maintained daily, if you take my point. I would like it to return a value based on todays date, counting the days in between today, and the last 1 entered. It is to cover the whole year.
View 5 Replies View Relatedi got the data in this format and need to get it as date in order to make a substract from a today formula minus that date in that format, if it helps this is data imported from a website.
View 9 Replies View RelatedEssentially I have three columns.
Column 1 is the name of a property
Column 2 either says "Primary" or "Secondary"
Column 3 has a date of when some building work is due to be completed.
I need a formula that can tell me how many entries there are in the second column of "primary" sites that have a completion date that is less than the current date.
I'm currently using the following formula to return either a "PAST DUE" or "DUE" value in a particular cell based on the date entered in the cell in the previous column.
=IF(AND(TODAY()>=BG43+5,TODAY()=BG43+10,"PAST DUE",""))
However, if the reference cell is blank the formula automatically triggers to put in "PAST DUE" as the value. I would like to modify this formula so if the reference cell is blank that this cell will also remain blank. I've tried a few different options, but I'm getting an "too many arguments" error on what I've tried.
I tried searching through the forums, but I don't exactly know how to word my question!
I have a workbook with two sheets: Meetings and MasterStatus
On the both sheets I have taskID for a specific task.
On the MasterStatus sheet, I want to use an array to look up the next meeting date for each taskID (Column C), referencing the Meetings sheet (Column E) to do so.
The formula I have so far doesn't work:
=MIN(
IF(
AND(
Meetings!$A$2:$A$3000>TODAY()-1,
NOT(ISBLANK(Meetings!$A$2:$A$3000)),
Meetings!$E$2:$E$3000=$C$7),
Meetings!$A$2:$A$3000,
0
)
)
I’ve been searching the forum but am struggling to find exactly the information I need!
I’m trying to get a column of cells to update with the date that the cells contents change to “Y”. I had been using the formula =IF(I7="Y",TODAY(),"-") in cell J7 but this updates the date every day. I need this date to remain the same as when it’s first populated.
I’ve been trying to cut and paste text from existing posts into the Visual Basic code but am new to this so am not getting the results I need. I had tried:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
'will put date in column B when something is put in A
If Target.Column = 9 Then
Target.Offset(0, 1).Value = Date
End If
End Sub
But this caused all sorts of problems! I then tried messing around with:
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
On Error GoTo enditall
Application.EnableEvents = False
If Target.Column = "I" Then
If Target.Value = "Y" Then
Excel.Range("J").Value = Date
End If
End If
enditall:
Application.EnableEvents = True
End Sub
But this doesn’t work either. In fact, both these codes are probably riddled with errors as I’ve been trying to learn by trial and error!
I'm trying to create a formula in Col D that will give me the difference of (Todays) Month/Date and (Date of Hire). The shaded rows at the end do not provide a correct answer.
How do I make the Column formula eliminate the 1 (due to hire mnth/day falling between 1/1 and current mnth/day). I've put about 30 hours in this formula, tried it many different ways. . . and realize I just can't get it.
I'm all for redoing the whole spreadsheet if you have a better way of doing vacation accruals
I have a large spreadsheet with a long date range from A:3 to A:900
what would be the best way to jump to today's date? I have seen formulas, Macro's, Active X controls, Hyperlinks?
Cell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
I have a formula
=AL260-WEEKDAY(AL260,2)+MATCH(AP260,{"Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"},0)
The formula looks at the chosen start date (AL260), and then uses a displayed text day (AP20) to display the relvent date to the text day, this works fine however if the start date is say 08/08/14 (a Friday) when the formula detects a Monday (this copies down a range looking at the start date and the text days to produce dates on each line, the formula displays the Monday dates prior to start date, is there any way to alter this to make it display the dates ahead of the chosen start date?
Using TODAY() in SUMIFS
so, this formula works as expected:
What I'm trying to accomplish:
In A1:
If a date in H2:H10 is greater than TODAY(), return the value of that date.
If TODAY() happens to be 1/20 and H2:H10 looks like this:
1/5/09
1/6/09
1/13/09
1/14/09
1/19/09
1/15/09
1/22/09
1/27/09
1/8/09
1/28/09
than A1 should have the value of 1/22/09
When TODAY() = 1/28/09, A1 should have no value, preferably no error either, but I can live with a NUM! or Value! or #N/A
Dates will not always be ascending. All cells in H2:H10 may not be filled. There may possibly be a duplicate, but the fact that there is a duplicate is not important to my result. (I'm looking for the 'next scheduled working day' whatever it is)
In cell K25 I have a value where if it is greater than 49 I want the forumla to look at the values of Cells L3:L22 (these cells have a range of dates in them). I want the formula to go through these cells and pick the next date after today....If the value in Cell K25 is Less than or equal to 49 I want it to just return Todays date.
I found this post http://www.excelforum.com/excel-gene...ter-today.html which was basically what I was looking for, but for some reason when I put that into my formula it will return the smallest date, even if it is older than today.
So going back to my formula....Here is what I have currently in my cell:
=IF(K25>49,MIN(IF(L3:L22>TODAY(),L3:L22)),TODAY())
Like I mentioned above - this results with dates that are older than today - what can I do to make it return results that are only after todays date?
In my example file
Click the button
Go to today
I am use the following formula =today()+1 to add date and what i would like to do is whne i save the work sheet under and new name is to have the date turn to a valve can this happen ...
View 9 Replies View RelatedI have a wicked wide spreadsheet that has 76 dates. These dates are in weekly increments. (IE 7/4, 7/11, 7/18)
I already have it set up to highlight the current week that I'm in, and there is an arrow above the column. Can I make a button to go to the current week? Like today, I would go to week 7/11.
I saw something with find.max, and give the date in Excels number format. Is this the right way to go?
I'm trying to let Excel know what year it is. The desired output is "2009". I tried the following. One cell (A1) has "=TODAY()" giving me the following output "2/12/2009". Now in another cell (A2) I'm putting "=RIGHT(A1,4) and the output is "9856". The format is set to general.
How do I get the output to read "2009", or is there any other way I can get the current year into a cell?
Another thing is that I want to identify a leap year as well. Leap years can be devided by four. I want to divide to outcome of cell A2 above by four and check if this can be divided by four. I don't know however how to put this in a formula unfortunately. To outcome has to be nothing behind the comma/dot=YES, otherwise=NO.
How to produce a formula that will stop counting after the day is over. For example, i have a spreadsheet that is calculating the total number of pending questions for multiple project types which are found on seperate tabs. The first tab of my spreadsheet is a Summary tab which displays the statistics of each project tab including how many questions we have pending. The number of questions are calculated by picking up how many cells display "Y" in the PQ (pending questions) column of each tab.
Our current process is to type in the number displayed in the summary that shows how many questions we have pending. What that does, is freeze the total number of questions we had pending for that day. I am trying to make this more automated by coming up with a formula that will freeze this number on its own.
If I write out what I am trying to do, it would go something like this:
Count cells with "Y" and stop counting after today.
Current formula in cell:
=COUNTIF(MDU!$L$6:$L$1000,"=Y")+COUNTIF(SDU!$L$6:$L$1000,"=Y")
I have a column that I would like to have a count of all the dates that areless then today's date.
I have tried: =countif(d2:d25,"<TODAY",0) This has only gotten me 0. If I leave the " " out then I get an error message.
I've inserted the current date into an excel form using the TODAY() function.
I also need to provide the form in French, and when I change the language for the cell with the TODAY() function, it automatically abbreviates the month. For example, today's date appears as "13 nov. 2008" rather than "13 novembre 2008" as I would like it to appear.
Any ideas on how to change this?
I have to figure out the date of 3 months ago from today. The rule is:
1) if today is the month end (e.g. 30/06/2013), then 3 months ago will also be the month end (e.g. 31/03/2013).
2) if today is not the month end (e.g. 10/06/2013), then 3 months ago will have the same day (e.g. 10/03/2013). But this has some exceptional case, because some month has 30th while other month does not. For example, if today is 30/05/2013, then 3 months ago will be in February which does not have 30th. In this case, just make it as the month end of 3 months ago.
In Excel VBA, is there a way to get the beginning date and the last date for the previous month from TODAY()?
i.e. If TODAY is Jan 3, 2014, then I would like to have the beginning date as Dec 1, 2013 and the end date as Dec 31, 2013.
i.e. If TODAY is Mar 18, 2012, then I would like to have the beginning date as Feb 1, 2012 and the end date as Feb 29, 2012 (yes 29, not 28).
So basically, I need to have the AI to know the beginning of the year (January 2014 - takes Dec 2013) and if it happens to be February, the 'end date' is either 28th or 29th depending on the year.
I have columns labeled with various dates.
How can I have excel go to the column with todays date when the sheet is opened?
