I built a formula but I need it to display the cell reference (column letter
& row number), not TRUE or FALSE, of the cell(s) that matches the criterias.
I have provided the formula to demonstrate what I'm trying to do.
=IF(--($F17="B")--($F17="D")--($F17="RS")*AND($M17="no",$O17="no"),"cell
reference")
The cell reference should indicate the cell in column "$F" along with the
row number.
Say, the cell's reference is A1, I want the value of the cell to be A1. If I'm in BB12, I want the value of the cell to be BB12
View 3 Replies View RelatedI have a cell containing a cell reference but I need the cell below to display the actual contents of the cell reference. For example, in cell C17 it displays $C$1202. In cell C18 I would like a formula that will display the contents of cell $C$1202. However, the formula needs to be linked to cell C17 as the reference will not always be $C$1202.
View 7 Replies View RelatedI have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
When I type a formula into a cell, it disapates into the answer. Eg: I type =100/2 into the cell. When I press enter and go back to the cell, the answer is displayed in the cell and in the formula bar. That is, it looks as if I typed in (hard coded) the cell as 50.
View 9 Replies View RelatedI have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
I want to display the formula in the adjacent box to where it is actually used. Would anyone happen to know how to get that done? Example:
If cell A1 contains the following formula: A1+ A2
I want cell A2 to show : '= A1+A2'
Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
Sub startup
Dim numwords As Integer
numwords = WorksheetFunction. CountA("H5:H64")
Range("H1").Select
Selection.FormulaR1C1 = numwords
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
How do I capture a formula from a cell? I want to create a macro that takes each reference (let's say 'B4') and changes it to if(B4=0,0,B4).
View 8 Replies View RelatedI am using the DOB formula of =DATEDIF(AA19,NOW(),"y") & " years, " & DATEDIF(AA19,NOW(),"ym") & " months, " & DATEDIF(AA19,NOW(),"md") & " days". In the next cell I want it to look at the previous cell and determine if "older than 2 years". I have tried the "search" and isnumber, but I keep getting the wrong answer.
View 1 Replies View RelatedHello,
I am trying to create a formula in Excel to preform a "SUM" on cells that only have a letter Y (as in "yes") in the cell next to them.
For example
I need to display cell AV13 from sheet 2 on sheet 1. To do this I go to sheet one and in the cell I type =Sheet2!AV13 and voila I get my value. My problem is AV13 is determined by two list boxes, one finds the column AV (named the cell that holds this value as StageColumn) and the other finds the row (named SubCatRow). What I want to do is have a cell that gets this information from Sheet 2. I tried to concatenate the string, but all I get is the text.
The concatenation string was =concatenate("='Sheet2'!",F25)
I have F25 containing the formula =Address(StageColumn,SubCatRow)
i have a table of data and a formula at the right which gives the max of that data and would like to get the row header and column header of the cell that is giving me the maximum value
e.g on the below the maximum value is 24346.3 and i would like to have in another cell Australia Diversified REITs
Diversified REITs
Homebuilding
Industrial REITs
[Code].....
I am trying to figure out how to reference the formula from another cell. For example, say cell A1 has the formula =indirect(address(row(),2)). Assume B1 equals 10 and B2 equals 20. The formula in A1 would yield 10. How can I make A2 reference the formula in A1 so that A2 yields 20? I need it to actually reference the formula in A1, simply copying and pasting A1 or dragging A1 will not suffice.
View 9 Replies View RelatedI currently have the formula =+'Mar-Final'!$C10*M3/N3.
I would like to have the 'Mar part be input from a cell.
For instance, if I put Feb in cell A3, then the formula would look like ='Feb-Final'!$C10*M3/N3.
I have a column (A1:A26) with a series of numbers which I want to multiply by a second variable in another column (Sheetb:C1). So I write a formula for a new column - =A1*Sheetb!C1. I want to multiply each value in (A1:A26) with just the value from Sheetb:C1. However, when I drag the 'fill series' pointer down, it automatically increments the cell its is multiplying by i.e. 1st cell is A1 X SheetB!C1, 2nd cell is A2XSheetB!C2... However I want it all multiplied by SheetB!C1.
View 2 Replies View RelatedI wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
I need to make a cell display the contents of the cell immediately below it, regardless of if there are rows inserted at the referenced row or above or below it on the worksheet. ALSO I need to do this at several additional cell locations down the worksheet. Such as : A1 displays A2, A4 displays A5, A7 displays A8 etc.
Example: I want A1 to display whatever is in the cell immediately below it. In this case A2. I need to be able to insert several rows at row 2 and have whatever new value is now in the A2 position displayed in A1.
After the rows are inserted I need the cell that was in position A4 to continue to display the contents of the cell below it.
I tried using the formula in A1 of: =INDIRECT("A2") and it works good except when I insert the rows my similar formulas below the area where the rows were inserted continue to refer to the specific original cell and not the one positioned now below it.
is it possible to have a formula that will look for keywords and display the cell content?
View 2 Replies View RelatedI'd like to display a formula contained in a cell within the worksheet. How can I do that?
View 4 Replies View RelatedI am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
I'd like to know if there's a formula concatenation I could use that, when I reference one of a columns cells elsewhere on a sheet, will tell me the name of the column it came from if I assign that column a name. I don't know anything about VBA but if that's the only way I'll try to figure it out. Excel 2013
If a8 said 55 under a column called Qtr 4 then a reference to A8 would show 55 (Qtr4)
I could always simply use an absolute reference for the beginning of the column but if there's a faster way where I could do these on the fly I'd prefer that
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
So finally got my sumrpod working using this formula
=SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$C8:$C10000=A5))
Is there a way i can link 'Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm] to a cell so that when the next months tracker is created and the filename changes i simply change the filename in the cell which im using to reference the filepath/filename.
e.g A1 = South Pac Load Tracker - MAR14.xlsm
Formula would read =SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[' & a1 & ;]SPECIALS TEAM NZ'!$C8:$C10000=A5))
