Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
I would like to create a user form that will display the results from a lookup formula. The userform would have 2 textboxes, so from the formula below BZ109 would be textbox1 and CA109 textbox2. Once data is entered in these textboxes you would hit submit to return the results in a message box. What would the code be for the sumbit button?
=VLOOKUP(BZ109, INDIRECT(CA109), 11, 0)
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
How to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have a range that has formulas that are based on other fcells outside the range.
What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.
There could be a marco to run when this process is needed.
example attached
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
View 2 Replies View RelatedI have written an array formula which you can see in the, "Done something cool in excel" bit on here. Part of this project was to changed/replace three diffence cells on each pass of the loop. I used some code off here which allowed me to display ALL changed on a seperate sheet, but there way way to much data on here and really confused the user. What i would like to do is; in 1 column, for it to say "CHANGED" if the data has changed "EXSISTING" if it hasnt changed and "NEW" if its been added, this will be referencing Column I.
View 7 Replies View Relatedhow to take the result of a formula calculated in one cell and show the results in an other cell
View 4 Replies View RelatedIf the results are < or = to 60, then I want result to be green. If the result is > 60, then I want to result to be red
View 2 Replies View RelatedI've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
View 7 Replies View RelatedI am looking for the best way ( or choice of ways) to display the correlation between 2 lists of results.
I have a column of failure percentage rates for engineers that I want to compare against a second column of their compliance rate with a process. There are two levels also. The first set shows the good performers and their compliance, the second showing the poor performers.
My goal is to see whether their compliance with the process has any bearing on their failure rates. The full lists contain data on approximately 400 engineers in each category
(if the the numbers below are not in a proper format, I tried to download the excel converter thingy but the link failed)
faliure rate
Compliance
3.95%
91.40%
[Code]....
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
how to make a formula to only display the results shown when using the filter..........
View 2 Replies View RelatedI have copy 65'000 formula text cells from a software and paste it to excel. But, the formula in cell is not activated. In order to activate the cell formula, I have to click on each individu cell and press enter to active it. But i got
65'000 rows of the similar cells. So, what is the quick way to all the text formula at the same time.
I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.
View 2 Replies View RelatedI have very little experience with programming, as a matter of fact the code in the sample file is the extent of my knowledge. I want to use Excel because not everyone in the plant has access to Access, but everyone has Excel.
The idea is to allow searching for parts based on 2 different part numbers, category, drawer, manufacturer, or description (any or all).
My first problem is how to make excel search using a userform and find multiple results, not just stopping after it finds the first match. For instance if you only searched for a category it should find all results that match that category.
(I'll try to anticipate a question here: the part numbers should be unique but may not be, so using the part number as a key will not work.)
The second thing is I would like to know how to populate these results in a listbox and and have the selected part show the matching picture. (This maybe more clear after seeing the spreadsheet).
And finally, is there any way to make the comboboxes on the search userform populate themselves off of the list of data.
I apologize if any of these questions have been answered already but frankly I've been searching google for the past week and haven't found anything, (This may attest to my search skills as well, ha ha ha), and I really just want this to be finished.
I have a database of 13 columns and ever increasing rows.
I want the following to be there on my userform.
1 combobox: showing the list of categories from which to search.(The categories are the column headings in columns A1 to A13.The user will have to select one category.
1 textbox:Here the user will enter the search term.
1 Command Button: When the command button is clicked/entered, the code shall be such that it will search in the column corresponding to the category mentioned in the combobox and display the results( The entire 1 row x 13 cloumns containing the search term) in a Listbox. If the search term does not matches then a message box should appear with the message "No entries found"
[b]
1 Listbox:to display the search result as mentioned above.
I'm using a userform to report on set of worksheets. Two of the functions are:
- reporting on the number of contacts with a client
- displaying the details of all contacts with selected client in one textbox.
I can't work out how to concatenate the text of all the contacts relating to one client in a text box (txtContactHist) on the userform.
Using the countIf function I'm trapping zero matches.
The worksheet containing the contacts has the following data columns:
Col A - Customer ID
Col B - Detail of contact
Col C- Date of Contact
Columns B and C contain the data I want to capture
Column A (the customer ID) is the column that is searched for a match ( via the userform text box (txtLic.Value))
To work out the total number of contacts, I use this bit of ...
I am creating a database using excel and I've created a userfrom for ease of data entry and searching the database. But now I am stuck at the searching part.
The sheet is Sheet1 and the userform is UserForm1. Based on the pic that i have attached, user needs to key in the keywords in any of the textboxes and comboboxes in the group box labelled "Organizational detail" and when he/she clicks on the Search button, the userform will display the whole rows where the search results reside onthe listbox. When the user click on the search results on the listbox, the textboxes and comboboxes will be updated with the data on the listbox.
The results of the formula in cell K36 in the attached spreadsheet returns a value of null. It should be $1,200. Am I blind or have I done something wrong. I just can't see the problem with the formula.
View 6 Replies View RelatedI have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100
200
300
400
100
Column B
400
200
300
100
500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
I also attached a excel.
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
When I type a formula into a cell, it disapates into the answer. Eg: I type =100/2 into the cell. When I press enter and go back to the cell, the answer is displayed in the cell and in the formula bar. That is, it looks as if I typed in (hard coded) the cell as 50.
View 9 Replies View RelatedI have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
I want to display the formula in the adjacent box to where it is actually used. Would anyone happen to know how to get that done? Example:
If cell A1 contains the following formula: A1+ A2
I want cell A2 to show : '= A1+A2'
I built a formula but I need it to display the cell reference (column letter
& row number), not TRUE or FALSE, of the cell(s) that matches the criterias.
I have provided the formula to demonstrate what I'm trying to do.
=IF(--($F17="B")--($F17="D")--($F17="RS")*AND($M17="no",$O17="no"),"cell
reference")
The cell reference should indicate the cell in column "$F" along with the
row number.
