I have three macro's.
1) Execute
2) CreateMatrix
3) CollectDebtCount
What I want to do is have the macro called Execute call up and trigger CollectDebtCount macro and CreateMatrix macro.
My problem is the value to limit the For/Next block in CreateMatrix is not using the value generated by the CollectDebtCount.
An example of the output is as follows: If the user enters the number 3 to the question "How many different type of debt do you own?", then the macro CreateMatrix should generate the list starting in cell A2, the value = 1, then in cell A3, value = 2, and in cell A4, value = 3.
Sub CollectDebtCount()
Dim Question
Question = InputBox("How many different type of debt do you own?")
Trim Question
End Sub
Sub CreateMatrix()
J = 2
I = 1
Dim Count
For Count = 1 To Question
Cells(J, I).FormulaR1C1 = Count
Count = Count + 1
Next.......................................
I am not sure if the VLookup or the If function will be the best way to perform this tast but I think it is they way I would want to go.
I have attached a sample workbook of what I am working with. Please refer to it.
On sheet 1 I named the table array Ear_Tag.
This is information that is provided to me from the farmers.
Note that there are sometimes more then 1 pig with the same tag number. The only way to tell them apart is by the Test Date.
On Sheet 2 Is where I record the test results.
I dont want to have to look up each pig after each test and fill in the rest of the cells manually. I would like to have a look up of the ear tag and the test date to find the correct pig. Then each of the cells will fill in the correct information.
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
I have a bunch of text boxes on another form. What set of text boxes i use depend on what illertation I am on, "counter". I am calling the sub which uses the "Select Case" code to figure out which textbox to use.
When I run it, it reaches the call, goes into the sub, and when it exits the sub it screws up. It says "Type miss match"
Intresting note, if you click play again, it works right away untill it runs another illertation through and gets back to that spot.
In the call function in the code below, all variables have Nothing in them when I put my mouse over them in debug. When I say nothing it actually says like textboxy = Nothing
counter has 1 to start.
Here is my code
Call subcase(textboxy, textboxM, textboxMa, textboxw, textboxd, checkboxx, counter) and here is the sub! thanks again!
Sub subcase(textboxy, textboxM, textboxMa, textboxw, textboxd, checkboxx, counter)
Select Case counter
Case 1 Set textboxy = frmNewItemMore.txtYear1 Set textboxM = frmNewItemMore.txtMonth1 Set textboxw = frmNewItemMore.txtweek1 Set textboxd = frmNewItemMore.txtDay1 Set textboxMa = frmNewItemMore.txtPM1 Set checkboxx = frmNewItemMore.chk1
I want to run an .exe program from Excel, so I used the shell method. This program should read in some input in text format. However, when I call from Excel, the prgram cannot read the input. When I run the program alone, it is OK.
I have UDF and would like to use a Macro Button to have it run whenever I need to. Now I have to disable macros with notification in trust center and after entering data, enable content. I have my UDF in a module, is it possible to have another module with a macro so I can run this UDF whenever I need to?
I've heard of calling a sub with arguments but don't believe I'd done it in the past. I want to remove the empty rows in 3 worksheets so that my row count actually stops where the existing data does. The second sub is where that takes place. What is the best way to call the sub to execute on the three sheets?
My thinking had been that if I used the argument ws as worksheet I could simply call the sub with the worksheet name as the argument.
Code: Option Explicit Sub PopulateProfit()
Dim wb As ThisWorkbook 'Dim ws As Worksheet Dim wsProfRep As Worksheet Dim wsChaseRaw As Worksheet
I wrote a function procedure in VBA. Pasted it into a 'VBAProject' sheet in my workbook. But when I try to call the function (by entering the name and arguments into a cell), the sheet displays "#NAME?".
What have I forgotten?
example:
Public Function TotDays( _EndDate As Date, _StartDate As Date _) As Integer TotDays = EndDate - StartDate End Function
How to call another program from excel using VBA, then excetue commands within it. All the commands are text based, and the program will respond to it, but i am not sure how to automate this.
I am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB: Public ClkBtn As String Public CallMacro As String
I want to be able to call the bottom number in a set of data that is ever expanding. I don't really know how else to describe it , so I will give an example.
Say I have: 3 6 4
I would want to be able to call 4, but then if I had: 3 6 4 5
I would want to be able to call 5, and so on. Is there any simple way of doing this? I basically want the maximum cell name, and the corresponding data inside of it.
I am trying to write a sub that executes a sub in an xla add-in. How can that be done in general?
More specifically I am wondering whether it can be done with the limited info that I have about the add-in and the to be executed macro within the add-in.
assume the name of the xla add-in is test.xla. The add-in is locked. I therefore do not know the name of the sub to be executed nor do I know the "on action" name of the sub in the ribbon. All I have is the Ribbon button label. Assume the ribbon button label is "ButtonLabel".
Is it possible to call the macro just by knowing the ribbon button label? If yes, how does the script look like assuming the above xla and button name?
I would like a code that will look for a workbook and then look in cell a5 and return number to a45 of active work sheet. I would also need it to add a6 + a7 + a8 and return sum to a46
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
I added a new sub to and now I'm getting a compile error. This was working fine until I added "Cust_Rev1". I get an compile error saying "expected variable or procedure, not module". Both are located in personal.xlsb. If I rem Cust_Rev1 out, I don't get a hiccup. (FWIW, I've been running "Cust_Rev1" on its own to debug it.)
I have created a custom menu and saved it as an .xla, one of the functions on the menu is to open up a workbook from a file path. The second option on the menu is to run a macro from the custom menu that is saved in this opened workbook.
Is it possible to write a code that will go off and find this macro from this open workbook?
The reason I wanted to do this is so the user has two options to enter data from however I didn't want to copy the macro over from the original workbook as in time the workbook will be updated
I have a named range, which pulls a text value from a vlookup. This text is the name of a vba sub I have written. What I would like to do, is call the macro based on this value. This is what I have so far but I can't get it to run.
Code:
Sub ControlSheets() ActiveSheet.Calculate
Hideallsheets Dim MacroSub As String MacroSub = sheets("Control").Range("SheetMacro").Value Call MacroSub 'this is the name taken above that i want to call
