Call Procedure From Add-in

Nov 27, 2007

I have a userform in an add-in (which is loaded), when I try and call it from an excel sheet, I get the following error "Variable not defined"

Private Sub CommandButton3_Click()

UserForm1.Show

End Sub

The code in the userform is all private subs.

Similarly when calling a public sub from the add-in such as;

Private Sub CommandButton3_Click()

Call SillySub

End Sub

I get the error "Sub or Function not defined".

How should I be doing this?

View 3 Replies


ADVERTISEMENT

Call A Sub Procedure From Another

Jun 19, 2008

how do you call another sub's function from another sub? For example:

Sub Worksheet_SelectionChange(ByVal Target As Range)

StartingDate:
Static STempHolding As String
If STempHolding <> "" Then OldStartingDate = STempHolding
STempHolding = Target.Value

EndingDate:
Static ETempHolding As String
If ETempHolding <> "" Then OldEndingDate = ETempHolding
ETempHolding = Target.Value

End Sub

If i just wanted to call the StartingDate function, from my Worksheet_Change sub how would i do that?

View 5 Replies View Related

How To Call A Procedure / Function

Mar 2, 2012

I have found some code that does what I want- but i do not understand how to use - call it. The programmer says ...

GetNetworkIPAddress()
' can be called from a worksheet cell using the formula:
' =GetNetworkIPAddress()

I have put this in a cell but i ger an error #Name?

what should i do ?

View 9 Replies View Related

Invalid Procedure Call Using ASC

Jan 27, 2008

I am getting an invalid procedure call when the portion of the code that has the ASC function runs. The only change I made to the workbook was to increase the available rows that this macro is totaling from 150 to 300. If I don't increase the rows I do not get the error.

What this code is doing is grouping information from 20 different sheets and totaling them and placing the total in the correct group. Most of the totals will begin with a number, however there will be a small amount that will begin with a letter. The items with letters need to be grouped in the 17000 category.

Dim c As Range
Dim rng As Range
Set rng = Range(Cells(3, "R"), Cells(lastrow, "R"))
For Each c In rng

If c < 20 Then c.Offset(0, 1) = "01000"
If (c > 19) * (c < 26) Then c.Offset(0, 1) = "02000"
If (c > 25) * (c < 161) Then c.Offset(0, 1) = "02600"
If c > 159 Then c.Offset(0, 1) = WorksheetFunction.Text(c, "000") & "00"
If Asc(Left(c, 1)) > 58 Then c.Offset(0, 1) = "17000"
If c > 170 Then c.Offset(0, 1) = "18000"
Next c

View 9 Replies View Related

CALL STORED PROCEDURE FROM VB

Feb 12, 2009

I need to call a Stored Procedure in a SQL Server from VB, but do not have the minimun Idea about doing it....Could you help me ?...I made a lot of attemps copiying code from other treads and scratch it, but so far results = none.

Server name: VAIO/SERVIDOR
DataBase: CEDRO
I´m using Excel XP.

View 9 Replies View Related

Call Procedure From Another VBA Project

Sep 21, 2006

In my VBA Project I try to call procedure from another VBA Project, but I get syntax error. The code is like: call Automation.xls!convert_numb

View 2 Replies View Related

Use A Variable To Run Or Call A Procedure By Name

Sep 8, 2007

I have 46 drop downs that I need to call from a main sub. I want to create one loop that will call each one to perform its function. Below is a simple example of what I am trying to do, but where I need help is with the 'Call Y' line. I am not sure what character to use to tell excel to look at what is in the value of Y, not 'Y' itself

Sub testitout()
Dim y As String

For X = 1 To 2
Sheets(" Lookup"). Range("E3").Value = X + 4
y = "dropdown" & X & "_change()" 'this will return "dropdown1_change()" for the first loop
Call y 'i want to call dropdown1_change() below
Next

View 9 Replies View Related

Invalid Procedure Call Or Argument

Nov 7, 2007

This error occured me, and i clicked "Debug" to see where was the error and i found a strange thing that i don't know how to solve it:
The line has the following

View 10 Replies View Related

Invalid Procedure Call Or Argument On Second Run

Jan 10, 2007

I have some VBA that appears to work perfectly on the first run, but I get the following error if I run it again or any alternate runs;

Title: Error (App_WorkbookBeforeClose)
Number: 5
Message: Invalid procedure call or argument

The only way my code currently works is if Excel has just been launched. The VBA creates, saves and modify's files so I imagine it has something to do with the ThisWorkbook object when a file is being saved or closed. I have googled the error but didn't really get anywhere as it is pretty generic and seems to be returned for a number of Excel products.

View 2 Replies View Related

Call / Run Commad Button Procedure

Jan 10, 2008

Is it possible to call a Forms Command Button procedure from a Module?

View 3 Replies View Related

Dir Function - Invalid Procedure Call Or Argument

Jun 25, 2013

When I step-through my code below, it always opens the first file in the directory "C:Pyramid Files", but when it comes back to the Pyramid Files sub after fully processing the first file via various other subs, the VB Editor apparently doesn't like something about this line: StrFile = Dir(), since it quits after "snapping-back" to the previous sub Initialize(). I have also tried StrFile = Dir, but that doesn't work either. I did Dim Strfile in the General Declarations. When I set Watches for Dir and Dir(), I get the value "Invalid procedure call or argument" for both, as if the directory function lost the value. I can't determine why this is happening.

VB:
Dim WSM As Worksheet, WSB As Worksheet, WS1 As Worksheet, [U]StrFile As String[/U], StrDirectory As String, ClientCode As String
Dim Filename As String, LastRowb As Long, LastColB As Integer, LastRow1 As Integer, NextRowC As Integer, x As Integer, y As Integer

[Code] .......

View 4 Replies View Related

Invalid Procedure Call Or Argument In Function

Aug 30, 2012

This error message in line vpp:

Invalid procedure call or argument

Code:
Function fn1(ByVal a, ByVal i, ByVal e, ByVal N, ByVal w, ByVal ta)
Pi = Application.WorksheetFunction.Pi
mhu = 398600
vpp = (mhu / Math.Sqr(mhu * a * (1 - e ^ 2))) * (-Math.Sin(ta * Pi / 180))
fn1 = 2 * vpp
End Function

View 9 Replies View Related

Call Procedure And Pass Range Info

Mar 22, 2007

Have a spreadsheet for creating employee schedules (any number of employees, 3 rows per employee, 5 columns for each day). I want to move all employees' info for one day (5 columns and XX rows) to another area and then clear the employees' data for that day. I have the code working for Monday but I don't want to duplicate it 6 more times for Tue -Sun. I have set up named ranges (i.e. MonFT, TueFT, etc.

I would like to call one subprocedure to do this and pass parameters for each day so the ranges can be changed to reflect the desired day?

I am doing this for holidays; i.e. if there is a Wed. holiday, store all of Wednesday's data and clear Wed. Then restore all Wed data when preparing the schedule for the following week.

View 7 Replies View Related

Auto Call A Procedure By Selecting From A Dropdown List

Oct 30, 2008

I have a worksheet with a Drop Down list (Set up with Data Validation).

All I want to do is a call a procedure when a particular option is selected from the list, without have to run the macro manually.

View 7 Replies View Related

Run-time Error '5' Invalid Procedure Call (CommandBars)

Nov 13, 2009

I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate.

I dont understand why this seemed to work for months and now creates an error.
It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while.

Run-time error '5':
Invalid procedure call or argument

This section is in my personal.xls file in "ThisWorkBook" of personal.xls.

View 5 Replies View Related

Runtime Error - Invalid Procedure Call Or Argument

Jun 24, 2014

Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row

[Code] .........

View 2 Replies View Related

Invalid Procedure Call Or Argument Referencing Files

Nov 6, 2006

I am using a procedure to loop through all files in a folder and am encountering an

Invalid procedure call or argument, error on the ChDrive line:

mypath = "\Eo1
_iSurveysNALCReturns"
ChDrive mypath

Is it something to do with the mypath syntax? Recently our drives have been reorganised. I used to just use "G:Surveys..." which always worked. Does anyone have any thoughts? I hope I've explained properly - you can probably tell I don't know much about this sort of thing.

View 5 Replies View Related

Invalid Procedure Call Or Argument Adding Conditional Format Condition

Oct 4, 2006

I would like to apply different conditional formatting at different times with a click of a button. I setup a dummy and turned on the recorder and recorded this

Range("A7:N7").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$C7=1"
Selection.FormatConditions(1).Interior.ColorIndex = 37
Range("A1").Select
End Sub

I tried changing to this

'/Conditional Format - OTHER EXPENSE B/L
Set rngConditional = wsData.UsedRange
With rngConditional...............

View 9 Replies View Related

Lookup Function Call: Vlookup Call In Sheet

May 21, 2006

I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)

my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)

View 4 Replies View Related

How To Set Outside Procedure

Apr 21, 2009

I have the following codes used with a user form, but they are all not working due to an outside procedure problem,

View 14 Replies View Related

Event Procedure

Dec 11, 2007

I've created a macro with a custom dialog box, but I don't know how to make the transition from when I make the dialog box pop up, the user enters the information, then they click "Continue" or "Cancel" or whatever it may be, how to do I make it happen from there out?

Do I make the command buttons a boolean and if they click it's true? How do I make it work?

View 14 Replies View Related

If Formula Or VBA Procedure

Sep 6, 2007

I need in column E the value "complete" but only against the last row of each system from column B, if column D ="draft del" and is not null. For example system V0523 is draft del and so is complete, therefore I would like "complete" in column E row 10.

******** ******************** ************************************************************************>Microsoft Excel - CA_ TDM_ ACQD_TBLDATAMODULE(LEFT JOIN)_all_systems.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17=
ABCDE1EIACODXA*LSACONXBDM_MGT_STATUSDM_QA_STATUS12EH101-VH71V00V00**3EH101-VH71V00V00**4EH101-VH71V00V00**5EH101-VH71V01V01WIP*6EH101-VH71V01V01WIP*7EH101-VH71V01V01WIP*8EH101-VH71V0523V0523001DRAFT*DEL*9EH101-VH71V0523V0523001DRAFT*DEL*10EH101-VH71V0523V0523001DRAFT*DEL*11EH101-VH71V0552V0552001**12EH101-VH71V0552V0552003**13EH101-VH71V0552V0552005**14EH101-VH71V0552V0552007**15EH101-VH71V0552V0552009**16EH101-VH71V0552V0552011**17EH101-VH71V0552V0552013**CA, TDM, ACQD_TBLDATAMODULE(LEF*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Run VBA Macro From Another Procedure

Sep 2, 2009

I have the following macros,but want them to run in sequence but i don't know how.
I plus won't another macro to save the archive as .txt

1. I use the following macro to open .txts so the cells go where i want to

Sub NewTextImport()
myfile = Application. GetOpenFilename("Text Files,*.txt")
Workbooks.OpenText Filename:=myfile _
, Origin:=1253, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array( _
Array(0, 2), Array(17, 2), Array(34, 2), Array(56, 2), Array(102, 1)), _
TrailingMinusNumbers:=True
Columns("A:A").EntireColumn.AutoFit
Columns("B:B").EntireColumn.AutoFit
Columns("C:C").EntireColumn.AutoFit
Columns("D:D").EntireColumn.AutoFit
End Sub

2.Remove the unwanted zeros from Column E.............

View 2 Replies View Related

Running A Procedure

Jun 19, 2007

I have written a macro in Excel VBA. The code is divided into modules and each module is having various procedures. I'm trying to run a procedure written in modules2 from module1. I'm getting an error message "Expected Variable or Procedure, not module".

View 2 Replies View Related

Age Validation Procedure Not Working

Jul 9, 2012

The code below is fired from a Worksheet Change Event on cell c18. The cell has a userform calendar control to select Date of Birth. What I want the code to do is check the age at the current date and if it is below 16 or over 25, then show the appropriate message. I cannot use data validation to not allow values outside this age range because there will be instances where a person's details can be added if their age is under 16 or over 25. I just need to alert the inputter in case they are unaware or have inputted incorrectly.

When the message box pops up, if they click Yes then the code should take them to the next cell for inputting. If they click No then it should stay in cell C18 and hopefully pop the calendar back up (I've not tested this bit yet).

The code as it stands brings up the "This person is under 16 years...." message no matter what date of birth is input.

VB:
Sub AgeValidation()
Dim age As Integer
Dim dob As Range
Dim AgeMsgAnswer16 As String
Dim AgeMsgAnswer25 As String

Set dob = Worksheets("Monitoring Form").Range("c18")

[Code] ....

View 3 Replies View Related

Run Macro / Procedure In Another Workbook?

Feb 28, 2006

When i open the MS-excell and i go to see the VBeditor i can see the following in the project window:

- spacereport(space.xla)
-microsoft excel objects
sheet1

[Code].....

All the code in spacereport project, let me go to File-->Space and then run a report previously added. what i would like to do is, being in the book3 project, execute modules and forms from spacereport project.

View 6 Replies View Related

Prevent Screen Changes During Procedure

Apr 26, 2014

I have 2 workbooks open. In the workbook that I am working in I run a macro from a userform to copy a worksheet from the other workbook that is idle in the back ground. I also display another user form that says "please wait" while the macro is running.

The problem I have is even though screen updating is set to false the screen switches over to the other workbook while it is copying the desired sheet and switches back to the workbook I am copying to after the macro completes. Also the "Please Wait" userform disappears while the other workbook is displayed and reappears when the initial workbook returns.

Below is my code which works without issue but perhaps there's a better way to copy between workbooks that would prevent the screen changes?

[Code] ........

View 3 Replies View Related

Macro - Procedure Too Large

Oct 15, 2008

I am using following event macro and it repeats itself more than 300 times. I am at a stage where I am getting a message "Compile Error, Procedure too large", I tried to break it into two but that's not working.

Option Explicit
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cl As Range
Dim lng As Long
Application.EnableEvents = False

Select Case Target.Address
Case "$E$3"
If Target.Value = "Yes" Then
SelectNumber:
lng = Application.InputBox("Please enter number 0 to 100", , , , , , , 1)
If IsNumeric(lng) = False Or lng < 0 Or lng > 100 Then GoTo SelectNumber
Range("G3") = lng
Else: Range("G3") = 0

.................................................(above statements repeat more than 300 times for different cells)..............................
Application.EnableEvents = True
End Sub

View 15 Replies View Related

Number 3.5 Is Getting Rounded To 4 In Procedure

Apr 17, 2009

If you run it type in 3.5. What gets returned from the procedure is the number 4 NOT 3.5. I think its related to the data type declaration but i thought a data type of long would include the number 3.5.

View 5 Replies View Related

Calling A Function In A Procedure

Feb 2, 2010

I need to extract the filename “My Excel File” from Worksheets(“Sheet1”).Range(“A1”), whose value = C:Documents and Settingsuser1DesktopMy Excel File

I found on Chip Pearson’s site a Function TrimToChar which, using SearchFromRight and a TrimChar of “” will trim OFF the filename “My Excel File”, leaving the Path.
But, I think I could use his function to tell me the number of characters in the Path and then use that to extract the remaining characters from the total character length (Mid Function)

Problem is, I don’t have a clue how to call a Function in VBA to work on Worksheets(“Sheet1”).Range(“A1”). How do you set the InputText , TrimChar, & SearchFromRight?????

(eventually, this will be in a loop, where I extract the filename from a Dynamic Named Range (list) in Column A)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved