I keep on getting the "Run Time Error 424 object required" yet the code seems to look fine .....I'm asking for it to look for the date and have stated which cell/range ... I don't get it.
View 14 RepliesI have an Excel workbook that I have built in user-level security to log into. If login is successful I have code like this:
If 'successful conditions
Goto Success
'more code here that doesn't matter
Success:
'verfies that it is a new project
lgCreateProject = MsgBox("Would you like to create a new project?", vbYesNo)
'opens a userform if new project
If lgCreateProject = vbYes Then frmQuoteInfo.Show
Unload Me
End Sub
If the user signs on successfully and is not starting a new project then they get the error noted in the title of my thread.
Then the change event in the ComboBox of TB5 stopped working with the above error message.
Here's the
Private Sub TB5_Change()
'Loads TB6 thru TB16 from TB5's RowSource
i = 0
If Not TB5.ListIndex < 0 Then
For i = 1 To 12
If Not i = 1 Then Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
Next i
End If
End Sub
The segment that is erroriung out is:
Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
The first time it errored debug said there was a type mismatch. That only lasted about 15 min before it changed error message to the one in the title. Debug highlighted this same code segment for both.
TB5's original RowSource is "FoodList_2" which is 12 colums wide and variable number of rows. After picking the item from the first column this code fills in the rest of the data for the chosen row. I'm not sure how wide the rowsource is with the find code.
I am running regression statistics for several different columns of data. In order to help me analyze the data, I am organizing the output on a specified worksheet called "Best Subset." I have stored the column names of the data used in different regression calls in a range array called Reg_Labels. The Reg_Labels array may contain one, two, or sixteen column labels in one specific location (where each column label is stored in a separate cell). All possible column names are stored in the Labels array (each name is stored in a separate location). I basically need to check to see which column names were present in a particular array location in Reg_Labels. When a column name from a cell in Reg_Labels(I-1) matches a column name from Labels(K), I am placing an "X" on the designated spreadsheet to indicate which variable(s) has been used.
My For..Each Loop will not work for some odd reason, and I need to figure out why. I keep getting an error that an object is required. I need each cell in Reg_Labels(I-1) compared with Labels(K), and I thought the For..each loop would be the easiest way to do it.
I just don't understand what's going on if C is a range object and Reg_Labels(I-1) is a range object. Wouldn't this loop supposedly cycle through every cell in Reg_Labels(I-1)?
Have I messed up some sort of object reference? ....
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 7/28/2007 by i8ig
'
If Target.Column = 1 Then
If Target.Value = "Med" Then
Rows(Target.Row).Interior.ColorIndex = 4
Range("H3").Select
ActiveCell.FormulaR1C1 = "=IF(RC[3]="""","""",RC[3]-3)"
Else
If Target.Value = "Tasc" Then
Rows("4:4").Interior.ColorIndex = 44
Range("H4").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Else
If Target.Range = "NBAR" Then
Range("J5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-5)"
Range("I5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Range("H5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
End If
End If
End If
End If
End Sub
I continue to receive an error '424' object required and I cant find it
I have two worksheets one called "invoice" and one called "tenants"
"Invoice" has a userform where I want to enter a tenancy number and then lookup the tenants name and address from "tenants"
I have put the following macro in
Sub lookup()
Dim res As Variant
res = Application.VLookup("A1", Tenants.xlsx("Sheet1"), "$A:$H", 2, False)
If IsError(res) Then
MsgBox "not found"
Else
MsgBox "found at pos: " & res
End If
End Sub
but get the following error - "object required"
I am trying to get the code to search for me specific words in the excel files in my Folder as specified, however when i try to run it, there will be a Error 424 : Object required.
Sub SearchText()
cr = vbCrLf
quot = Chr(34) 'quotes
Dim l As FileSearch
Set l = Application.FileSearch
s = InputBox("Search", " Enter the text you're looking for.")
With l
.NewSearch
.LookIn = "D:FinancialNews"
.SearchSubFolders = True
.FileName = "*.xls"
.MatchTextExactly = True ............................
Private Sub Worksheet_SelectionChange(ByVal target As Range)
If programmatic Then Exit Sub
selectionChange (target) ' 424 occurs on this line
End Sub
Private Sub selectionChange(target As Range)
' sub implementation here
I can't see anything wrong with my sub call that would cause a 424: Object Required.
I am getting a runtime error 424: Object required on the line "For Each ws In memberLists.Worksheet". The entire code is below. How can I fix this?
View 4 Replies View Relatedwhen using the key word "target" as in Target.Address. I get a runtime 424 error saying that object is required.
View 4 Replies View RelatedI'm working in a project on my PC with Vista and Office 2003/Windows 2007/Windows 7, the project works perfectly. At work, i have the office 2007/Windows 7 and it appears at the beginning Runtime error 424 - object required.
Code:
Private Sub Workbook_Open()
'ENTRA
'protege
[Code]....
I have the following code, but when I try to execute it I get a "Run-time error 424: Object Required" message. The active sheet has just one pivot table on it. Is there some problem with how I'm referencing the pivot table? If there was more than one table on the page, how would I choose a specific table?
Dim pt As PivotTable
Set pt = ActiveSheet.PivotTables(1)
pt = TableRange1.Select
I found this code in the Mr. Excel archives. It is designed to add a sequential number to a cell if the cell next to it contains text and then stop as soon as it encounters a blank. Problem is that I keep getting a Compile Error: Object Required on the Set nos line. I tried using a qualifier and also expirimented with CreatObject but still received the error.
Sub AddNos()
Set nos = Range("B1", Range("B1").End(xlDown)).Offset(0,-1)
nos.Resize(1,1).Value = 1
nos.Resize(1,1).AutoFill nos, xlFillSeries
nos.NumberFormat = "General""."""
End Sub
I'm using Excel 2003 running under Win XP. I'm completely running out of idea how to figure out this error.
here's my vba as follows:
Private Sub cmdConnect_Click()
sckClient.Connect
cmdConnect.Enabled = False
cmdSendData.Enabled = True
cmdDisconnect.Enabled = True
End Sub
Private Sub cmdDisconnect_Click()
sckClient.SendData "close"
sckClient.Close
Application.Quit
End Sub
Private Sub cmdSendData_Click()
sendExcelData
cmdSendData.Enabled = False
End Sub
I've this 2 files msinet.ocx and MSWINSCK.OCX in my system32 folder. But still nothing work.
my code (line highlighted in red) and tell me why i get the runtime error 424, "object required" on that line?
How do i correct this? ..
So I went back and reorganized my userforms in the order that they are typically operated. I went in reassigned all the appropriate new userform names where needed. Now when I hit the item to activate the userform I get an "Object Required" error code....? So I went back recopy/paste each activation macro for the userforms and I still get the same error code
View 7 Replies View RelatedI am copying a WorkSheet and I want to set it directly to an Object. I don't want to use the activeWorksheet. I does work like this with .add so my idea was it should work with copy too.
[Code] .....
It does Copy the Worksheet, but afterwards VBA gets error 424
SO how do I set a Workbook.copy ?
I am trying to run the following macro to copy a data range(A1:HX1) range from one sheet(sheet 6) and past it into the next available blank row in another sheet called New_Overall_Input_File but get the following error when I try and run it......."Object Required"?
Sub ALLCARS()
Sheet6.Range("A1:HX1").Copy
New_Overall_Input_File.Range("D" & Rows.Count).Offset(1, 0).PasteSpecial xlPasteValues
Application.CutCopyMode = False
End Sub
I have a script that creates a bunch of sheets. It was working fine when testing because I was just adding a sheet using worksheets.add, but now I've found out they all need to be created from a template sheet. I set up the template sheet and changed to the worksheets.copy method, but I'm receiving a runtime error "Object Required"
All I want to do is copy the sheet and rename it to the next name in the array (I have an array of sheet names).
Here is the code snippet in question (error line in red):
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Set WS = Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter))
WS.Name = CStr(arrSheets(lngX))
As written, the duplicate sheet IS created...
I also tried the method below, but I get the same result (sheet created (but not named) and the same object required error)
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter)).Name = CStr(arrSheets(lngX))
I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.
[URL]
I am new to userforms and am trying to make the options in a ComboBox the entries in a list of cells. When I try to show the userform an error appears saying "Run-time error 424: Object Required".
I am only assuming that it is the ComboBox which is causing the error because I made one very similar to this ealier but without the independent ComboBox option. Is my method of assigning the options to the ComboBox correct?
The coding I am using to try to fill the ComboBox is below:
Code:
Private Sub UserForm_Initialize()
Dim n As Integer
With ComboBox1
n = 45
While Cells(n, ActiveCell.Column + 1) ""
.AddItem Cells(n, ActiveCell.Column + 1)
n = n + 1
Wend
End With
End Sub
I'm having some trouble with some VBA code written for Excel (Office 2003). I have a video file (in .wmv format) and a list of time stamps in an excel file. When I click a timestamp, I want to pop open the WMV and play it at that given time.
I've made some headway thanks to a few others, but I'm getting this "Run-time '424': Object required" error that I can't seem to fix. I've attached the file, and it occurs at the line "frmPlayer.Show" and I have no idea why!
code is getting an error on the bold line below. My error message is run time error 424 - object required.....
View 7 Replies View RelatedI have a macro which creates and names worksheets. I am making a button which also deletes the latest of these created worksheets, but doesn't delete other sheets. I am getting the error: Run-time error '424': Object Required. Here is my code for deleting the sheet:
[Code] .....
MSCount stores the highest "MS#" sheet.
The first line of the IF statement is where the error is.
I am using this code to open a form in Excel:
Code:
Private Sub Workbook_Open()
Form1.Show
End Sub
It has worked perfectly for about 2 weeks, well now when I go to open the workbook it gives me the debug error of Run Time error 424 Object Required. I last ran this today at about 8 a.m. no errors, but now about 4 hours later, it is bugging out. What is causing this?
Im trying to add hyperlinks to cells using an array but im getting "run time error 424 - object required" error. THe code im using is:
Code:
Sub hyper3()
' not WORKING - ARRAY to add hyperlink to cells
Dim rngIn As Range
[Code]....
I have written a macro that prompts the user to chose some files and if they meet certain criteria, it copies them to a specified folder.However, I have run into this 424 error "Object required".
Code:
Sub FILES2SFTP()
Dim FileNames As Variant
Dim I As Integer
Dim fso As Variant
Dim Data As String
ChDrive "G:"
ChDir "G:TEST"
[code]....
The error is in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
I am using following line of code to assign name of active workbook to "InputWb". I have declared InputWb as a string. Set InputWb = ActiveWorkbook. While running the macro i get error saying "Object Required".
View 2 Replies View RelatedI have this code inside my workbook:
If Range("C9") = "" Then
CommandButton1.Enabled = False
ElseIf CommandButton1.Enabled = False Then
CommandButton1.Enabled = True
Else
End If
But when I run this code I get the Error "Object required"...dont know why... my button is named CommandButton1!