I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.
[URL]
I am using this code to open a form in Excel:
Code:
Private Sub Workbook_Open()
Form1.Show
End Sub
It has worked perfectly for about 2 weeks, well now when I go to open the workbook it gives me the debug error of Run Time error 424 Object Required. I last ran this today at about 8 a.m. no errors, but now about 4 hours later, it is bugging out. What is causing this?
I am getting a runtime error 424: Object required on the line "For Each ws In memberLists.Worksheet". The entire code is below. How can I fix this?
View 4 Replies View Relatedwhen using the key word "target" as in Target.Address. I get a runtime 424 error saying that object is required.
View 4 Replies View RelatedI'm working in a project on my PC with Vista and Office 2003/Windows 2007/Windows 7, the project works perfectly. At work, i have the office 2007/Windows 7 and it appears at the beginning Runtime error 424 - object required.
Code:
Private Sub Workbook_Open()
'ENTRA
'protege
[Code]....
I have the following code, but when I try to execute it I get a "Run-time error 424: Object Required" message. The active sheet has just one pivot table on it. Is there some problem with how I'm referencing the pivot table? If there was more than one table on the page, how would I choose a specific table?
Dim pt As PivotTable
Set pt = ActiveSheet.PivotTables(1)
pt = TableRange1.Select
I'm using Excel 2003 running under Win XP. I'm completely running out of idea how to figure out this error.
here's my vba as follows:
Private Sub cmdConnect_Click()
sckClient.Connect
cmdConnect.Enabled = False
cmdSendData.Enabled = True
cmdDisconnect.Enabled = True
End Sub
Private Sub cmdDisconnect_Click()
sckClient.SendData "close"
sckClient.Close
Application.Quit
End Sub
Private Sub cmdSendData_Click()
sendExcelData
cmdSendData.Enabled = False
End Sub
I've this 2 files msinet.ocx and MSWINSCK.OCX in my system32 folder. But still nothing work.
my code (line highlighted in red) and tell me why i get the runtime error 424, "object required" on that line?
How do i correct this? ..
I am new to userforms and am trying to make the options in a ComboBox the entries in a list of cells. When I try to show the userform an error appears saying "Run-time error 424: Object Required".
I am only assuming that it is the ComboBox which is causing the error because I made one very similar to this ealier but without the independent ComboBox option. Is my method of assigning the options to the ComboBox correct?
The coding I am using to try to fill the ComboBox is below:
Code:
Private Sub UserForm_Initialize()
Dim n As Integer
With ComboBox1
n = 45
While Cells(n, ActiveCell.Column + 1) ""
.AddItem Cells(n, ActiveCell.Column + 1)
n = n + 1
Wend
End With
End Sub
I have a macro which creates and names worksheets. I am making a button which also deletes the latest of these created worksheets, but doesn't delete other sheets. I am getting the error: Run-time error '424': Object Required. Here is my code for deleting the sheet:
[Code] .....
MSCount stores the highest "MS#" sheet.
The first line of the IF statement is where the error is.
I am using Excel 2003. I get the above error and when I press debug, the issue highlighted is the following:
Code:
graff:
adde.TextBox6.Text = "ok"
shet = ActiveSheet.Name
Set CurrentChart = ActiveSheet.ChartObjects.Add(5, 20, 350, 200)
[Code].....
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I am using Excel 2010. Why I do struggle with setting the range below
Code:
Set rng = Sheets("Data").Range(Cells(4, firstcol), Cells(lastrow, lastcol))
I get run time error 1004
Tried simple code from msdn and it return same error
Code:
Range(Cells(2, 3), Cells(10, 4)).Select
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code:
Sub Send_to_Me()
' Send_to_Me Macro
Dim objTemp As Object
Dim FileExt As String
Dim TempFileName As String
Dim FileFullPath As String
Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then
If Range("B3").Value = 0 Then
Columns("G:P").EntireColumn.Hidden = True
Else
If Range("B3").Value = 1 Then
Columns("H:P").EntireColumn.Hidden = True
[code]....
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 7/28/2007 by i8ig
'
If Target.Column = 1 Then
If Target.Value = "Med" Then
Rows(Target.Row).Interior.ColorIndex = 4
Range("H3").Select
ActiveCell.FormulaR1C1 = "=IF(RC[3]="""","""",RC[3]-3)"
Else
If Target.Value = "Tasc" Then
Rows("4:4").Interior.ColorIndex = 44
Range("H4").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Else
If Target.Range = "NBAR" Then
Range("J5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-5)"
Range("I5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Range("H5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
End If
End If
End If
End If
End Sub
I continue to receive an error '424' object required and I cant find it
I have two worksheets one called "invoice" and one called "tenants"
"Invoice" has a userform where I want to enter a tenancy number and then lookup the tenants name and address from "tenants"
I have put the following macro in
Sub lookup()
Dim res As Variant
res = Application.VLookup("A1", Tenants.xlsx("Sheet1"), "$A:$H", 2, False)
If IsError(res) Then
MsgBox "not found"
Else
MsgBox "found at pos: " & res
End If
End Sub
but get the following error - "object required"
I am trying to get the code to search for me specific words in the excel files in my Folder as specified, however when i try to run it, there will be a Error 424 : Object required.
Sub SearchText()
cr = vbCrLf
quot = Chr(34) 'quotes
Dim l As FileSearch
Set l = Application.FileSearch
s = InputBox("Search", " Enter the text you're looking for.")
With l
.NewSearch
.LookIn = "D:FinancialNews"
.SearchSubFolders = True
.FileName = "*.xls"
.MatchTextExactly = True ............................
Private Sub Worksheet_SelectionChange(ByVal target As Range)
If programmatic Then Exit Sub
selectionChange (target) ' 424 occurs on this line
End Sub
Private Sub selectionChange(target As Range)
' sub implementation here
I can't see anything wrong with my sub call that would cause a 424: Object Required.
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
I keep on getting the "Run Time Error 424 object required" yet the code seems to look fine .....I'm asking for it to look for the date and have stated which cell/range ... I don't get it.
View 14 Replies View RelatedI found this code in the Mr. Excel archives. It is designed to add a sequential number to a cell if the cell next to it contains text and then stop as soon as it encounters a blank. Problem is that I keep getting a Compile Error: Object Required on the Set nos line. I tried using a qualifier and also expirimented with CreatObject but still received the error.
Sub AddNos()
Set nos = Range("B1", Range("B1").End(xlDown)).Offset(0,-1)
nos.Resize(1,1).Value = 1
nos.Resize(1,1).AutoFill nos, xlFillSeries
nos.NumberFormat = "General""."""
End Sub
I have an Excel workbook that I have built in user-level security to log into. If login is successful I have code like this:
If 'successful conditions
Goto Success
'more code here that doesn't matter
Success:
'verfies that it is a new project
lgCreateProject = MsgBox("Would you like to create a new project?", vbYesNo)
'opens a userform if new project
If lgCreateProject = vbYes Then frmQuoteInfo.Show
Unload Me
End Sub
If the user signs on successfully and is not starting a new project then they get the error noted in the title of my thread.
Then the change event in the ComboBox of TB5 stopped working with the above error message.
Here's the
Private Sub TB5_Change()
'Loads TB6 thru TB16 from TB5's RowSource
i = 0
If Not TB5.ListIndex < 0 Then
For i = 1 To 12
If Not i = 1 Then Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
Next i
End If
End Sub
The segment that is erroriung out is:
Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
The first time it errored debug said there was a type mismatch. That only lasted about 15 min before it changed error message to the one in the title. Debug highlighted this same code segment for both.
TB5's original RowSource is "FoodList_2" which is 12 colums wide and variable number of rows. After picking the item from the first column this code fills in the rest of the data for the chosen row. I'm not sure how wide the rowsource is with the find code.
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works)
2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works)
3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Run "PullInSheet1"
Dim oldbook As String
[Code] .......
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code:
Sub PullInSheet1()
Dim AreaAddress As String
'''''' Sheet11.UsedRange.Clear
Dim ClRange As String
ClRange = "= 'L:ADMINEMPLOY SERVICES" _
[Code] ........
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
So I went back and reorganized my userforms in the order that they are typically operated. I went in reassigned all the appropriate new userform names where needed. Now when I hit the item to activate the userform I get an "Object Required" error code....? So I went back recopy/paste each activation macro for the userforms and I still get the same error code
View 7 Replies View RelatedI am copying a WorkSheet and I want to set it directly to an Object. I don't want to use the activeWorksheet. I does work like this with .add so my idea was it should work with copy too.
[Code] .....
It does Copy the Worksheet, but afterwards VBA gets error 424
SO how do I set a Workbook.copy ?
I am trying to run the following macro to copy a data range(A1:HX1) range from one sheet(sheet 6) and past it into the next available blank row in another sheet called New_Overall_Input_File but get the following error when I try and run it......."Object Required"?
Sub ALLCARS()
Sheet6.Range("A1:HX1").Copy
New_Overall_Input_File.Range("D" & Rows.Count).Offset(1, 0).PasteSpecial xlPasteValues
Application.CutCopyMode = False
End Sub
I have a script that creates a bunch of sheets. It was working fine when testing because I was just adding a sheet using worksheets.add, but now I've found out they all need to be created from a template sheet. I set up the template sheet and changed to the worksheets.copy method, but I'm receiving a runtime error "Object Required"
All I want to do is copy the sheet and rename it to the next name in the array (I have an array of sheet names).
Here is the code snippet in question (error line in red):
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Set WS = Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter))
WS.Name = CStr(arrSheets(lngX))
As written, the duplicate sheet IS created...
I also tried the method below, but I get the same result (sheet created (but not named) and the same object required error)
Code:
If lngX = LBound(arrSheets) Then strAfter = Sheet1.Name Else strAfter = CStr(arrSheets(lngX - 1))
Worksheets("TmpSht_Checks").Copy(after:=Sheets(strAfter)).Name = CStr(arrSheets(lngX))