I am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I'm simply trying to graph my data on a line graph in Excel. see the attached.
The issue is that the spacing on the x-axis is all equivalent. I want the space between the initial and 1st month to be very small while the space between 6 month and 12 month be larger.
So at the end of the day, the line will be kind of crunched down from the beginning and goes up at the 6 month data point.
Is Excel capable of handling such simple request?
I have the theoretical set:
year $ %
2003 100 10
2004 120 20
2005 145 30
2006 205 40
2007 300 50
Could I make the year the X-axis and make 2 y-axes on the same graph in excel that each datasets would be correlated to (eg. for money it'd be from 0 to 300 while for percent it'd be from 0 to 50)
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedI need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedI would like to add a vertical axis to the right of my plot that looks exactly the same as the left axis. The only way I found to do this is to add a secondary axis. However this axis is based on a data series and it does not match the left axis.
How can I make the left and right vertical axis look the same.
Any way to get the values in a chart/graph by putting an specific X axis value.
E.g. There is relation between Gauge height and Flow
GaugeFlow
0.30500.320.100220.3413880.275390.3813470.855280.4017081.322240.4137521.692480.4333542
.468280.4529963.431060.4823795.30220.5115577.774290.5229628.94510.56120913.535920.58917.68
If I draw the curve with Flow on X-axis and Gage on Y-axis and then want to know the flow at Gage 0.53m.
OR
By putting flow value to know Gage height.
I need to graph a function of SIN(X), I did it by writing my x-values in one column with small steps between each value and then calculating the sin(x) value in the column next to it and then graphing the two columns. But this raquires a lot of space on the spreadsheat and it would be convenient to be able to write it on the form y=sin(x). having x defined as a continuous variable. and then plotting the graph
View 2 Replies View RelatedI have a bunch of numbers, I need to make a graph out of these:
30
28
30
29
30
30
35
29
30
34..........
However, on the Y axis, there should be numbers 1-8, and on the X axis there should be numbers 0-40. I have to get the number on the chart, including the number of times the number is shown in that column. I have no idea how to do that, I tried hundreds of times. How do I put on the chart the number of times for example 30 shows up? I want it to look like this:
http://img452.imageshack.us/img452/2...celhelpzb0.jpg
ofcourse this is just one, I need to show for all numbers:..............
I have modified the Run as Regular Macro code from this site to only changing the x axis, select different cells and I also only used object 1 instead of the name of the chart.
The problem is that when it is run which ever value is changed last, minimum or maximum, it will turn on auto and mess it all up.
I have a table as attached. What I have is 2 tabs. Data - is the raw data which shows the date and time of each application per person and the time cut and formatted for lookups. Sheet 1 - This is a rota showing each member of staff.
Below the rota is a definition of each shift, i.e E = Early which is 8.30 to 5.00pm.
1.
At the bottom of sheet 1, I would like the total of each application for each member of staff for the time they have worked for each day.
i.e if staff member N-R worked a late (L) on the 2nd, I would like the number of application taken on the 2nd for N-R between the hours of 10.30am and 19.00.
I have tried nesting a vlookup and a hlookup function but I just cannot fathom it out. I have also tried to use coutifs().
OR
2.
On the data sheet I would like an additional column after the cut time to flag up applications taken for each member of staff during their shift. i.e if N-R takes 5 application on 22/12/2010 between 8.30 and 12.30, 3 after 10.30. I would like each individual app to flag up in its row if taken after 10.30 for this member of staff on this day.
I am trying to use the following for my x-axis on a scatter plot. Excel is either formatting it into another type, or showing me day by day 0:00 time.
Is this an impossible mission? Below is how my data comes to me, I have no control over modifying it.
3/23/12 5:54:6.795 AM3/23/12 5:55:17.795 AM3/23/12 5:56:31.795 AM3/23/12 5:57:29.795 AM3/22/12 9:11:9.395 AM3/22/12 9:11:45.395 AM3/23/12 8:38:39.495 AM3/23/12 8:39:17.495 AM3/26/12 12:15:28.081 AM3/26/12 12:17:20.081 AM3/26/12 12:19:41.081 AM3/26/12 12:21:22.081 AM3/26/12 12:22:21.081 AM3/26/12 12:24:15.981 AM3/26/12 11:54:45.621 PM3/26/12 11:55:48.621 PM3/26/12 11:56:25.621 PM3/27/12 11:02:57.221 AM3/27/12 11:03:29.221 AM
I'm trying to chart three columns/twelve rows. The first column has Jan-11 through Dec-11. The second column has Average Speed of Answer (ASA) -- various times from 6 seconds to 3 mintutes 17 seconds. The third column has 00:01:00 (one minute) in every cell which is the ASA Standard which I was going to use to create a horizontal line.
When I chart this the Y axis has labels that are very random (I.E. 0:00, 0:43, 4:26, 2:10, 2:53 and 3:36). I would like to change it to every 30 seconds (I.E. 0:00, 0:30, 1:00, 1:30 etc.) but I can't figure out how.
I have a chart that have y-axis values normally between 0-50 but sometimes i get a peak with value 400 and then my chart becomes unclear because y-axis max value then goes up to 400.
Is it possible to set a roof here so max value on y-axis is e.g. 60 and values above that is visible as 60 then in the chart.
I have 10 items on my x-axis. Is there a way to space item 10 further apart than the other 9?
View 9 Replies View RelatedI have a graph I made some time ago and I got rid of the labels and tick marks on the x axis but now someone wants them back - simple you say, just select the axis and bring them back. But no matter what I do it won't let me select the axis. Does anyone know of a way round this? I am using excel 2003.
View 9 Replies View RelatedI'm looking to count the following:
A B
a 1
a 1
b 0
b 1
c 0
a 1
If column A=a AND column B=1, add column B on the same axis. I can only get a function that adds all B column if A=a. The function should equal 3. Cells B1, B2 and B6 should be the only ones counted.
The scale on our chart in the X axis is mandating a numeric number. It is showing "39200" instead of 4/28/07. In any event, we would like to have 4/9/07 -- the last date we have data for and the last date that we have referenced on the X axis.
The chart is in the attached chart.xls and the data is in the attached chart.xls
I have some simple data and i want to create a horisizontal bar chart with 2 axis (X axis) the top one showing number of stocks number up to 270 and the bottom with Market Cap up to 1,200. (See attached). I set up the chart and it looks fine but it has only one axis so in order to create a second axis i right click on the blue series (no of Stocks) and go through the motions of setting up a secondary axis. However when i do that it ends up looking like the chart to the right with the Bars Cojoined (which is not what i want) I cannot seem to achieve 2 axis with separated bars
View 3 Replies View Relateda_Y-Axis auto scale.zip
How to autoscale chart using VBA, so i can maximize the viewable area without using the default format axis on chart each time i paste new data to the table,
I've got two columns of information plotted against one another in an x,y scatter. I need the x-axis to reflect each of the 42 numbers I've added in the column and not a preset or fixed range of numbers. (I need to see the actual number that I assigned each x-plot point on the x-axis and not on the plot point itself).
View 2 Replies View RelatedWhat I need to do is have the numbers on the x axis count up with a even increment. For example, 1,2,3,4,5. That part is easy and I can do that, the next part is not.
Next I need the X axis of my graph to have, what the graph I'm trying to replicate calls, a "squared scale". So the numbers need to look like what is above but be spaced in squared intervals.
It would look something like this: 1 2 3 4 5... note the spacing between each is increasing.
Below are pictures showing how the book does it by hand.
20140625_085909_zps204851fe.jpg
20140625_085922_zpsbc03f1bd.jpg
I think I could get it to look like this with a dummy series with the axis labels listed but I need to be able to have a point read off the actual values so the dummy axis wont work.
What is the best way to add in column AG as a bar next to the current bars. I would want one solid color, and I don't need it brown up between positive, and negative. Also, I would want a 3rd error bar underneath for FX P&L. Looks like if I try to add a new data series they default to xy ranges, and forgot how to reverse. see attached example.
Chart question.xlsx