The scale on our chart in the X axis is mandating a numeric number. It is showing "39200" instead of 4/28/07. In any event, we would like to have 4/9/07 -- the last date we have data for and the last date that we have referenced on the X axis.
The chart is in the attached chart.xls and the data is in the attached chart.xls
how to get the min value scale value off a graph when .MinimumScaleIsAuto = True?
The reason I ask is that I want to make my baseline for the graph that min number so that names from the x axis are not sitting in the middle of the graph. Incognito Auto Merged Post;I feel real bright...just playing around I found my answer...
With .Axes(xlValue)
.MinimumScaleIsAuto = True
.MaximumScaleIsAuto = True
.MinorUnitIsAuto = True
.MajorUnitIsAuto = True
.Crosses = xlCustom
.CrossesAt = .MinimumScale
.ReversePlotOrder = False
.ScaleType = xlLinear
.DisplayUnit = xlNone
End With
Basically I have some performance figures for a fund that I want to make a chart for, the problem is that the first date (the start date of the fund) is 15/09/2011 but every reporting date after that is the end of the month.
So my data looks something like this (not real figures)
15/09/11 20
30/09/11 22
31/10/11 23
30/11/11 25
31/12/11 26
31/01/12 27.5
29/02/12 29
So what I want is a graph where the x axis starts at 15/09/11 but then the next label is 30/09/11 and 31/10/11 etc, while still keeping the scale proportionate to the dates, ie the distance between 15/09/11 and 30/09/11 will be half the distance between 30/09/11 and 31/10/11.
The 2 outcomes I seem to be stuck with is either forcing the graph to start at 31/08/11 and making the y axis cross at 15/09/11, however with this the x axis goes left past the y axis cross point and it just looks dumb, although everything right of the y axis is correct.
Or secondly I get the graph to start at 15/09/11 and set it to label every 1 month and all the labels are 15/09/11, 15/10/11, 15/11/11 etc
I have access to excel 2003 or 2007.
Two graphs with different scale x-axis.
Graph No. 1 with smaller time frame, Daily.
Graph No. 2 with larger time frame, Weekly.
Objective: Add vertical line to mark the same times in both graphs.
Trouble is both graph already utilise the secondary axis. VBA is allowed.
I have some code for changing the scale of my chart axes so that when new data is inserted into the column which the chart sources from (say column B), the axis scales on my chart will automatically adjust (as the Excel algorithm sometimes leads to charts which are a bit squashed). This code works fine, and I have included it below.
I have then tried to introduce an ActiveX listbox so that when you select an item in the box, the reference number generated (1,2,3...etc) then determines which data series is inserted into column B using a vlookup function. However, when I do this, the original VBA code for automatically adjusting the chart axes no longer works.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
With ActiveSheet.ChartObjects(1).Chart
[Code].....
I want to automate the Display labels in my Charts using VBA Coding…
I would need to use this small code in Charts with different Scales as some of the Scales in my Data are in a very large Range close to Trillions so its not possible to have these as the Primary-Y-Axis Scale and therefore I would need to use the in-built Display label option which Excel provides..
However, I always prefer to have the scale in the Range of Thousands so the Max I can have in the Scale can be 10,000 so if there is any Number more than that or the Scale is going above than I would prefer that this gets auto-calculated to Multiply with the remainder and show appropriate Scaling.
For Ex:In this example My largest Number is 4500000000 which is 100 M..So I would want the scale to show 4500 and the Display label as X Millions..
So The Display Label would be different for different Ranges but the Max Scale preffered would be 10,000.
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
How can we convert time on a scale of 100 to a scale of 60?
View 3 Replies View RelatedI have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedI need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
I am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedI would like to add a vertical axis to the right of my plot that looks exactly the same as the left axis. The only way I found to do this is to add a secondary axis. However this axis is based on a data series and it does not match the left axis.
How can I make the left and right vertical axis look the same.
Any way to get the values in a chart/graph by putting an specific X axis value.
E.g. There is relation between Gauge height and Flow
GaugeFlow
0.30500.320.100220.3413880.275390.3813470.855280.4017081.322240.4137521.692480.4333542
.468280.4529963.431060.4823795.30220.5115577.774290.5229628.94510.56120913.535920.58917.68
If I draw the curve with Flow on X-axis and Gage on Y-axis and then want to know the flow at Gage 0.53m.
OR
By putting flow value to know Gage height.
A set low number of 100 is in cell B4, and a related set high percent of 18% is in cell B6.
A set high number of 1,000 is in cell D4, and a related set low percent of 14% is in cell D6.
In cell B8 a manual number will be typed between 100 and 1,000.
In cell B10 we want a formula that will roundup a percentage number between 14% and 18% depending on the number inserted in B8.
I am trying to create a scale using IF functions in Excel.
I have a row of numbers that I want to convert to my scale. My scale is fairly simple, less than 1 =1 and more than 10 = 1
After that, any number between 1-2 gets a 10, any number between 2-3 gets a 9, any number between 3-4 gets a 8, etc.
So, what I have done is take a logic if-then function and applied it to my row of numbers. It looks something like this:
=IF(2<D2<3,9)
However, this doesn't work. I have a number (2.55), and instead of showing a 9, it says FALSE. I am pretty sure 2.55 falls between 2 and 3 on the scale. Why won't it work?
Also, is there any way to create a function where I could put each of my if/then functions to create my whole scale? Right now I just have 10 separate columns for each number on my scale.
Here's the scenario. A co-worker and I access the same file from the same online database and download it in the same manner. We have the same version of excel. We then open these identical files, we run a formatting macro (identical), but when it comes time to set the page breaks in order to get the items to print on the same page I have to increase a columns width to make it fit on one page and yet it still doesn't match theirs. It appears to have a different scale but I'm not sure of the option difference between our machines. I don't know how it could be the printer since it physically gives her different page break option than what mine does.
View 1 Replies View RelatedI would like to scale an image to 124% how do I do that
View 1 Replies View RelatedMy display scale is 125%. A college's is set to %100. This causes errors when I place Shapes to saved locations, .Top & .Left programmatically. Based on Google searches, it appears that setting the auto scale mode to DPI may solve this problem. How do I set it?
View 5 Replies View RelatedI have a list of items that each one has starting price, demands and current price. Current price changes by demands according to pre determined scale. Demands values are entered manually by user. I’m looking for a formula that will calculate current price automatically according to the scale & demands. I cannot know what will be the amount of demands (it could be 0 or 5000...) but I do know that demands are sequential integer numbers, positive or negative. I also don’t want it to exceed the minimum and maximum value that determine by user. I think the attached file will explain well than what I’m writing.
View 5 Replies View RelatedI am using a VBA macro which performs a Yahoo webquery to obtain stock data. After the data are downloaded, a chart is updated with the new data.
The current macro updates the scaling on the price axis just fine, however, if I change the time frame the x axis, i.e, time/date axis is either spread out to far or jammed up.
The code for re-scaling the the y axis is shown below:
Code:
Sub UpdateScale()
Dim ChartVar As Chart
Dim lMax As Long, lMin As Long
On Error GoTo ScalingProblem
'Assigns the values in the Min and Max ranges to variables.
[Code]....
Any similar sub that would also rescale the x axis as needed when the data intervals are changed?
I AM TRYING TO WRITE A FORMULAE BASED ON THE FOLLOWING SLIDING SCALE.
0 - 49.99 = 9.9%
50 - 599.99 = FIRST 50 @ 9.9% (4.95) THEN AT 5.8%
600 ABOVE = FIRST 50 @ 9.9% (4.95) + 50 - 599.99@5.8 (32.45) AND THEN 600 ABOVE AT 1.9%
this is what i came up with, but it is not excepting the formulae.
=IF((C4
My question is that i have to scale my data.. Can i do Z-transformation..
Is there any inbuilt function or shall i have to write Code,
Calculate the intensives to be paid to a loan officer based on the number of cases he brings , according to the following :
the first 10 cases 0
from 11 to 15 cases 6 pounds
from 16 to 20 cases 8 pounds
from 21 cases to more 10 pounds
so I need to put the total number of the cases , the loan officer brought in one cell, and this value to be processed and splitted to the segments above , and multiplied with adjacent pounds sums , and finally calculate the total of theintensive to be paid.
I have a big set of data, where I requires to zoom in to view the details of the graph (by scaling the X and Y axis). I am thinking of a graph that can use 4 scroll bar to control the zooming. 2 for each axis, where one control the difference between the maximum and minmum value (Zooming effect, minimum value always the same), and one to scroll the range of the data without zooming, (maximum - minimum) always the same.
View 5 Replies View Related