I have a chart that have y-axis values normally between 0-50 but sometimes i get a peak with value 400 and then my chart becomes unclear because y-axis max value then goes up to 400.
Is it possible to set a roof here so max value on y-axis is e.g. 60 and values above that is visible as 60 then in the chart.
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedI've put together code to construct a chart
It all works fine but I've noticed an odd quirk which I can't explain nor can I seem to fix. Here's the (reduced) code :
Code:
Dim appExcel As Object ' Excel Application
Dim chtPareto As Object ' Chart
Set appExcel = CreateObject("Excel.Application")
Set chtPareto = appExcel.Charts.Add
With chtPareto
' Primary category axis
[code]....
The category (x) axis title should be horizontal, whereas the value (y) axis title should be rotated. Stepping through the code, when I .SetElement for the category axis title, it appears horizontal as planned. However, as soon as I .SetElement for the rotated value axis title, the category axis title also rotates.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View RelatedI need to create a graph with a 2 x axis and a single y axis. For example:
Pressure ( PSIA) Solubility (mol %) Velocity (m/s)
200 0.024 1
300 0.036 1.2
400 0.041 1.8
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
I am trying to reproduce a graph similar to this: [URL] ....
How to get the Y axis in the center and two distinct bar charts on either side.
Sample data can be found here: [URL] ....
how to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI have a data set that is a spectrum of (y)intensity vs (x)energy I was wanting to add an additional X axis at the top of the graph showing the wavelength conversion for the energy value, is that possible in excel? and if so how?
View 1 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedI would like to add a vertical axis to the right of my plot that looks exactly the same as the left axis. The only way I found to do this is to add a secondary axis. However this axis is based on a data series and it does not match the left axis.
How can I make the left and right vertical axis look the same.
Any way to get the values in a chart/graph by putting an specific X axis value.
E.g. There is relation between Gauge height and Flow
GaugeFlow
0.30500.320.100220.3413880.275390.3813470.855280.4017081.322240.4137521.692480.4333542
.468280.4529963.431060.4823795.30220.5115577.774290.5229628.94510.56120913.535920.58917.68
If I draw the curve with Flow on X-axis and Gage on Y-axis and then want to know the flow at Gage 0.53m.
OR
By putting flow value to know Gage height.
i am using excel to create 8 groups that does night shifts for 4 days then another group does it afterwards and so on. instead of putting the dates manually and adding 4 days after the start of each night shift, is there a way or a formula i could use to just make it easier so that i wont be able to just manually do the dates each year? i've put a screenshot copy of the excel file that i am working on.
View 1 Replies View RelatedOpening it manually the dates in column C are all consistently date numbers. i.e. using the =ISNUMBER() function to test them, they all return True
However when I include the VBA instruction:
when i try to create a formula on cell E7, D7 . and when i copy down the formula , it does not auto cal , i need to manually refresh , or save the file name , then the foumlar cal cell will updated.
Project (5) *ABCDE6Row Labels20062007060773M33789.7523454.52815.81252345.458AAEON*45419.32815.81252345.459ACCESSORIES112*2815.81252345.4510ASIS PCB638084102815.81252345.4511AUTENTO16392.1619578.272815.81252345.4512AXOR*600512815.81252345.4513BECKHOFF2652676.642784074.132815.81252345.4514BRAND - EXPERT222154612815.81252345.4515DANFOSS29780.3338514.022815.81252345.4516DELTA SERVO26245.366573.52815.81252345.4517ELMEX*15422.72815.81252345.4518GE FANUC1700346.271181053.752815.81252345.4519HAKKO1148010.51069760.112815.81252345.4520HANYOUNG103454543.52815.81252345.4521HENGSTLER362948.76298865.852815.81252345.4522HMS22267.598102815.81252345.45Spreadsheet FormulasCellFormulaD7=B7/12E7=C7/10D8=B8/12E8=C8/10D9=B9/12E9=C9/10D10=B10/12E10=C10/10D11=B11/12E11=C11/10D12=B12/12E12=C12/10D13=B13/12E13=C13/10D14=B14/12E14=C14/10D15=B15/12E15=C15/10D16=B16/12E16=C16/10D17=B17/12E17=C17/10D18=B18/12E18=C18/10D19=B19/12E19=C19/10D20=B20/12E20=C20/10D21=B21/12E21=C21/10D22=B22/12E22=C22/10 Excel tables to the web >> Excel Jeanie HTML 4
Running Windows XP; Excel 2003
I have a fairly simply macro.
It copies certain sheets out of a workbook (for a new workbook)
Unprotect the sheets in the new workbook
Deletes a particular cell on each sheet
Unhides a sheet
Sets all of the new worksheets to normal view
Protects the new sheets
Lets the user save and name the new workbook.
All is working fine Except it will not change the new workbook from Page Break View to Normal view.
The code I'm using = Sheets("name").Activate
Activewindow.View=xlNormal
Here's the strangest part. When I run the macro from a command button, the newly created workbook retains the page break view (as is in the original).
When I run the macro line by line via F8, IT WORKS JUST FINE
I'm sure there is an extremely simple answer to this question, but I can't seem to find it anywhere.
I am adding a combobox to a userform using the controls toolbox. How can I populate the combobox without a macro?
I do not want to add extra code to the UserForm_Initialize() event because this would just add clutter (I have seen numerous examples using .AddItem)
I would like to just change the combobox by hand.
In one tab, I have a huge data set as follows:
account --- account(1) --- value
111111 --- b5 --- 123456
111111 --- a2 --- 32156
111111 --- c5 --- 31221
111111 --- e7 --- 1121312
222222 --- b5 --- 5464
222222 --- c1 --- 887895
333333 --- d4 --- 45454646
in another tab, I want to be able to manually input a value, in this case account, (1111 for example) and have it return all the values in account(1) (in this case b5, a2, c5, e7). Once I have that, I can do a vlookup to get the "value" which is what i need, but I just can't quite seem to get it to do the first part - I input account and it returns all account(1) values.
I have excel sheet it contains 200000 records.I want to delete records from 50000 to 200000.Is there any shortcut to delete data.
View 2 Replies View RelatedI would like to be able to put manually a formula in a specific cell (like a "requested date" cell) and then have a table that use this date for the headers and calculate +1 year for each columns.
For exemple:
=2012-01-01
=2013-01-01
=2014-01-01
=2015-01-01
requested date:
2012-01-01
Would you know a way to easily do it? when I try to do it manually (+365) it doesn't consider leap years. I thought about a =DATE formula but the requested date have to be manually entered...
I have 4 colums of data (A2:D5684) with the data sorted ascending by column A. I would like to delete the rows with duplicate information without having to manually look through the 5684 lines.
View 5 Replies View RelatedI've created a pivot table as shown in the attached image - I've had to hide most of the data but I'm not sure how confidential it is so thought I should play it safe.
excelforum.JPG
In between the Job Board Applications column and the Registrations column I want to have a Cost Per Application column.
In this fake example, the company that I've called 'Excel Forum' (imaginative I know) pay $1000 per month for their email marketing, so the cost per application from email would be 1000/1150 = $0.87.
Is there a way to insert a column in a pivot table that you can manually add formulas to?
I've tried replicating the pivot table underneath using cell=B6 etc. and the GETPIVOTDATA function then hiding the whole pivot table apart from the filters, but because there are a different number of subcategories every month the cell references don't work when the filter is changed.
I also tried to add a calculated field but this didn't seem to be what I wanted.
As a last resort I can add the cost per application manually to the raw data and include it as a column when making the pivot table, but this would be an ENORMOUS job to do every month so I'm in need of a better solution!
I have a report created daily with account numbers, however there are duplicates. Is there a faster way to filter out duplicates other than sorting and deleting manually?
View 4 Replies View RelatedIs there a way to set 2 cells equal, while allowing either one to be manually changed? So if I put in value of 10 for Cell1, Cell1 and and Cell2 will both be equal to 10. Then if I change Cell2 to a value of 20, both cells will be equal to 20.
View 5 Replies View RelatedOptionally, to customize the sort operation, on the Options tab, in the Sort group, click Sort. In the Sort <Field name> dialog box, select the type of sort that you want by doing one of the following:
To return items to their original order, click Data source order. This option is only available for OLAP source data. To drag and arrange items the way that you want, click Manual.To select a field to sort by in ascending sort order, select Ascending (A to Z) by, and then select the field from the drop-down list. To select a field to sort by in descending sort order, select Descending (A to Z) by, and then select the field from the drop-down list. Tip Read the Summary section at the bottom of the dialog box to verify your choices.
My problem is this: after following the above steps, then clicking Manual, then ok, I cannot drag and arrange the row labels in the PivotTable.
Is there any way to print a list of Excel files without opening each of them manually?
View 1 Replies View RelatedHow to use I have these two tables, like the picture shows.
How to get the "food" items to generate in the second table without having to enter them manually?
For example, if I were to enter 3 food items out of 10 entries, on the second table, those food items would appear.
excel.png
I am about to take a corporate finance course. The textbook uses a ton of basic (complex to me) equations to calculate interest rates, bond premiums, dividend reinvestment scenarios, etc.
I know that Excel has a bunch of specific functions to calculate interest, NPV, etc. but I am NOT interested in using those because I would like to have Excel "do the math" once I enter the formulas (or parts of formulas) correctly.
how to enter the equations below into Excel without using built-in formulas (I'm also not looking to use the Equation editor because I actually to calculate the answers, not just have the visual look/feel of the equation).
1R2 = [(1 + .0194)(1 + .03)]1/2 - 1
If done correctly, 1R2 in the above should equal 2.47%. I am totally fine doing parts of this in separate cells if necessary.
And something more complicated like the below. I wrote out the word "delta" because I don't know how to create the "triangle" symbol for delta on this forum post. According to the text, for securities with semiannual receipt (compounding) of interest, it is represented as:
-D = (delta P / P) / ((delta r sub b) / (1 + (r sub b)/2)))
Or in English, I believe that can be expressed as "negative D equals the quotient of delta P divided by P (in the numerator) divided by the following: delta r sub b divided by the quantity 1 plus r sub b divided by 2"
And finally
V sub b = 1000 / [1 + (.10/2)]2(4) + 50 times the following compound bracketed expression [1 - (1 / [1 + (.10/2)]2(4)] divided by (.10/2)]
I am currently writing a macro that does a variety of things, one of these being that it automatically sums up columns I,J and K. The dilemma I have is that I need to be able to see the sum of the data in a cell at the bottom of the column, after manually filtering it according to what I want to see.
View 4 Replies View Related