I have created a Pivot Table from 11 Woksheets, each sheet in named by Country.
When I create the Pivot table I end up with 4 fields named, Row, Column, Value, Page1
How can I change the Page1 field?, as it names the Worksheets as Item1, etc which is confusing when I try to Pivot Down to a specicifc country
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies View RelatedI have a pivot table without report filter and I set insert page break after one of my selected row labels.
I also would like when I print, these row Labels become the title of these pages at the same time.
Actual File : Untitled.png
However I would like when I click on print or save as pdf will print all pages as one file and each Center that I have set page break for, in separate page and add that specific center as its title:
Attachments for more details:
test_Page_1.jpg
test_Page_2.jpg
test_Page_3.jpg
test_Page_4.jpg
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
Once i identify the PivotField, how can i filter it to be > than Date?
View 2 Replies View Relatedwhy the Group Field option is not available in my Pivot Table. Other Pivot Tables in the same document, using data formatted the same way will let me format the data (the original data is in MM/DD/YY [h]:mm format). I have floored my data so that I can group by hour of the day, but it's not letting me do that.
View 3 Replies View RelatedI have two fields in pivot table, "HATA TOPLAMI" and "SIRA NO". "Hata toplamı" is sum of items, and "Sıra no" is count of items. İ want to divide these two fields and add it to the pivot table, like "HATA TOPLAMI" / "SIRA NO". I have tried calculated field function from pivot table. İ wrote "="HATA TOPLAMI" / "SIRA NO"". But the summary is false. I want to divide Sum of "Hata toplamı" and count of "Sıra no" but instead it divides with sum of "sıra no". Is there a way to do this?
View 3 Replies View RelatedI have a problem in expanding/collapsing fields in pivot table.
I have source table with GROUP, SUBGROUP, ACCOUNT and AMOUNT. In pivot table I've put GROUP, SUBGROUP and ACCOUNT in Row labels respectivly, and AMOUNT in values. There are same names in SUBGROUP for different names in GROUP. (for example: groups are Production costs and Distribution costs and in each of them there are subgroups Personnel costs and Other costs).
The question is: Is it possible to expand only field Other costs in group Distribution costs while field Other costs in group Production costs stays collapsed?
Can I add a calculated field formulas in Excel pivot table. Such as CONCATENATE?
View 2 Replies View RelatedIhave a pivot table that takes data from a table, groups the duplicate items and adds their values up - so it shows just one entry for each item. I now want to add a calculated field in there so that I can divide one of the fields into another.
View 14 Replies View RelatedI have attached a simple test file. The data tab has two columns in the pivot range. The third column is _not_ in the pivot range, but is there to show the result I'm trying to get with the pivot.
The idea is to count the number of people whose entry dates are greater than 2/1/2009. My third data column gives a correct result, but a similar formula in the calculated field of the pivot table gives a completely wrong result (a date), where my goal is to generate a zero, a one, or a sum of zeros and ones.
It could be a formatting issue, but that would not explain why all the pivot results have the _same_ wrong answer.
I'm new to PTs and calculated fields, and expect I've made a naive mistake that an expert could easily spot.
I have a pivot table with Sales and Budget, if i need to find the difference in pivot table i think i need to use field settings, however i am not getting the result
I have attached the same file for reference
I have a pivot table with 2 row filters (dept and name) and then three columns - Year 1, Year 2. I need to add a calculated field inbetween Year 1 and 2 to show the variance in dollars from ( Year1-Year2) as well as an additonal a column that shows the percentage change between the tw o years . I know I can copy this over and add formuals in Excel but I need to retain the features of the pivot tables due to the 2 row filters?
View 1 Replies View RelatedI want to show the field name (i.e Surname) before the value is shown in the Pivot Table. for Example if the Field is Surname and the value is 'Smith', I want to show - Surname Smith
View 1 Replies View RelatedI've created a Pivot Table with 30+ fields. I've recorded the following macro to add the first field. I need modifying the code so that it looks for and adds every field automatically. It'd save a lot of time.
Code:
Sub PTAdd()
'
' PTAdd Macro
'
'
With ActiveSheet.PivotTables("PivotTable3").PivotFields("Assigned To")
.Orientation = xlRowField
.Position = 1
End With
End Sub
I have a pivot table Field, with 3 listed items, referencing data from 3 separate worksheets - named 2004, 2005, 2006. ( i renamed them from the original item1, item2 and item3, to 2004, 2005 and 2006. I have now redefined the range in worksheet 2006 by using the Pivot table wizard and going one step back. I have now got 4 listed items in my Field - 2004, 2005, 2006 and item4. I cannot rename item4 to 2006 unless I delete 2006. But do you think it's letting me do that???? So how do I remove unwanted items in a Pivot table field list?
View 9 Replies View RelatedI don't know how I done it. But I have managed to totally goober up my pivot table settings at a global level.
Start with a data worksheet and do Data | PivotTable and Pivot Chart Report... and just click the Finish button and you get a skeleton with the grey "Drop Column Fields Here", "Drop Data Items Here", "...Row...", "...Page..." and blue highlights around each. I don't know when -- but it must be recently, perhaps even this morning... I did something that turned off this behavior. Now I don't see the grey messages. Now I don't see the blue outline. Normally, if that were the case, one simple clicks on the Show Field List buttons and voilá. But neither on existing pivots in workbooks that have always been well-behaved and new pivots too, I cannot get the Show Field List buttons to work! Neither the default feller on the PT toolbar, nor the same button on the popup menu that you get when right-click the PT. Even more amusing? The button(s) are not disabled. If I click somewhere off the PT, then yes, the buttons disable.
Click back on the PT and the button on the PT toolbar "enables". They just don't do anything.
Troubleshooting failures so far...
on the pivot table field list-enable on the right hand side of the screen, only after that the needed fields can be dropped in.
Is there any other method to draw the pivot table?
I have a pivot table that picks up the month an invoice was generated. Since I have several invoices for a few months in 2005, I would like to sum all the 2005 invoices into one column. I have the impression that I can insert a field within a Pivot table to sum all the amounts related to 2005.
View 3 Replies View RelatedI know in Pivot tbale we could add calculated field into the data ,but I fail to put the added in the "Page","Row" or the "Column". Eg. in the sheet of data,I have a column " DATE",but no column for year.Is it possible to add year in the "page" without adding anything into the "data" sheet?
View 5 Replies View RelatedI have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
View 2 Replies View RelatedI have a problem that I'm sure requires the most elementary fix. I have exhausted google on this. All I need is a drop down list for each value field. See picture attached.
View 1 Replies View RelatedI have a table with two columns: 'Serial' and 'Read Date'. The table represents all those serials that failed to read at a certain time and date. For example:
Serial Read Date
4028543 10am Dec 16
4028544 10am Dec 16
4028566 10am Dec 16
[Code].....
I know you can move them manually but I have 73 reads so far and that's a lot of manually moving columns about.
I'd like to get Excel to use the original order of the Read date entries.
Is there a way to modify Pivot Table so that "Sum of, Count of", etc is not shown. For example, have Table (& Pivot Chart) show "West Region" instead of "Sum of West Region"
View 13 Replies View RelatedI am trying to display text in the value field within a pivot table. I do not want a count or any number to display. What I am basically trying to create is a weekly schedule for nurses, with the dates on the top and times along the side, with "call type" and client as the text data to display with the value field.
I have attached an excel file with all the data on Sheet 1 and my attempt at a pivot table on Sheet 2. Perhaps there is some way to write a macro to display the data in a similar fashion, without using a pivot table?
Clients and Caregivers - All Schedules-2.xls
I have a data that consists of months, forecast and actual.
I've created a pivot table where; months is on the row, forecast and actual is on the values
I wanted to know the percentages between forecast and actual (forecast / actual) to see how it perform each month.
How do I go about inserting a pre-defined named called "percentages" on pivot table with calculated field or calculated item on pivot table itself?
Is there any way how you can change value in page field in pivot table using formulas? I know this can be done with couple of lines of VBA, but I need to create VBA-free excel file.
View 4 Replies View RelatedOne of the few flaws I have found using pivot tables is that when selecting from the the page field it does not filter the other page fields to match your current selection.
It does in the actual table, so why not the page fields?
For example we have a pivot table like the following
|Country| (ALL)
|City| (ALL)
|Count of People|
|YEAR| ________ |Gender|
_______________Male__________Female
2008__________1000 _________500000
2009__________9999999_______1
If I select England from the country, when I go to select a City I do not want to be able to select only the cities in England and not every city in the world.
The Attached File shows you how to deal with this Problem.
VBA code to remove "sum of" from a pivot table. It works on a regular pivot table. However, when applying this code to a pivot table created utilizing PowerPivot, the code does not work. Here is the code:
Sub ChangePTName()
Dim pt As PivotTable, pf As PivotField, ws As Worksheet, i As Long
Application.ScreenUpdating = False
Set ws = ActiveSheet
For i = 1 To ws.PivotTables.Count
Set pt = ws.PivotTables(i)
pt.ManualUpdate = True
For Each pf In pt.DataFields
[Code]...
I have a PT with multiple data fields that I want to Rank individually and then give those ranks a weight percentage. Once I have that weighted rank, then I can sort PT items based on the rank.
Is there a way to do this inside the PT?
I.E.
Items are PNs
Data fields are NUMBER OF TRANSACTIONS, QTY SOLD, DOLLARS SOLD
I want to rank each field and then assign a weight to it. Then I can sort PT based on the RANK data field.
