Pivot - Can't Show Field Lists
Apr 9, 2007
I don't know how I done it. But I have managed to totally goober up my pivot table settings at a global level.
Start with a data worksheet and do Data | PivotTable and Pivot Chart Report... and just click the Finish button and you get a skeleton with the grey "Drop Column Fields Here", "Drop Data Items Here", "...Row...", "...Page..." and blue highlights around each. I don't know when -- but it must be recently, perhaps even this morning... I did something that turned off this behavior. Now I don't see the grey messages. Now I don't see the blue outline. Normally, if that were the case, one simple clicks on the Show Field List buttons and voilá. But neither on existing pivots in workbooks that have always been well-behaved and new pivots too, I cannot get the Show Field List buttons to work! Neither the default feller on the PT toolbar, nor the same button on the popup menu that you get when right-click the PT. Even more amusing? The button(s) are not disabled. If I click somewhere off the PT, then yes, the buttons disable.
Click back on the PT and the button on the PT toolbar "enables". They just don't do anything.
Troubleshooting failures so far...
View 9 Replies
ADVERTISEMENT
Jan 4, 2007
I have a pivot table Field, with 3 listed items, referencing data from 3 separate worksheets - named 2004, 2005, 2006. ( i renamed them from the original item1, item2 and item3, to 2004, 2005 and 2006. I have now redefined the range in worksheet 2006 by using the Pivot table wizard and going one step back. I have now got 4 listed items in my Field - 2004, 2005, 2006 and item4. I cannot rename item4 to 2006 unless I delete 2006. But do you think it's letting me do that???? So how do I remove unwanted items in a Pivot table field list?
View 9 Replies
View Related
Oct 23, 2003
Can I do something so my pivot table shows Manager name in all appropriate cells (eg. agomes is A3:A4 and bschaefe in cells B5:B13)? ........
View 9 Replies
View Related
Apr 23, 2008
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies
View Related
Apr 20, 2014
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
View 1 Replies
View Related
Jan 29, 2013
I have a [COLOR=blue !important][COLOR=blue !important]worksheet[/COLOR][/COLOR] containing a large amount of [COLOR=blue !important][COLOR=blue !important]data[/COLOR][/COLOR] and then another worksheet made up of summary tables. The summary table uses SUM on various fields in the data to get monthly totals.
For example one cell is
=SUM(Data!C7524,Data!C7530,Data!C7536,Data!C7542,Data!C7548,Data!C7556)
Some of the other sums can be made up of 100+ cells.
I would like to be able to keep the sum in [COLOR=blue !important][COLOR=blue !important]the [COLOR=blue !important]cell[/COLOR][/COLOR][/COLOR] but somehow get a breakdown of what that sum is made up of and the description in the adjacent column. So I could [COLOR=blue !important][COLOR=blue !important]click[/COLOR][/COLOR] on the cell and ideally it would create a new worksheet listing all the criteria values and description for that sum, looked up using the references in the sum cell.
So clicking on the one above would give me something like
Description Value
JP7600 100.00
JS0140 300.00
JS0340 100.00
JS0540 50.00
JS0740 75.00
JS2030 100.00
Is what I'm after possible?
View 1 Replies
View Related
Dec 19, 2013
I need to map 2 reports to show if they are equal.
One report has 2 columns with name and amount of what was sent to a vendor.
The second report has 2 columns with name and amount of what they received.
The second report name column has account number added so the column won't be exact.
I need to compare the 2 reports to see if the same name and amount was correctly sent/received
Example:
Report 1 (sent)
Column 1-Name Sandra
Column 2-Amount $100
Report 2 (received)
Column 1-Name Sandra/284578
Column 2-Amount $100
I am not sure how to display my findings. I would need to identify what is not matching.
View 5 Replies
View Related
Jan 19, 2010
I can create a drop list show various choices, is it possible to have the list of choice but also for the user to input text not in the list.
So if you had a list of names andrew, brian, chris and then not in the list you could write david ?
View 5 Replies
View Related
Jan 28, 2013
I have 2 related columns with one to many relationship, on a tab populated with some data. On another tab I'm referencing these 2 columns. When I populate one column I would like a drop down showing all the related data from the 2nd column of the first tab in the 2nd tab. I'm unable to do a named range as my first column has spaces in its name.
View 11 Replies
View Related
Feb 5, 2009
=IF(LEN(I3),I3,J3)
at the moment if there is no result it equals 0
I thought this might work..
=IF(ISNA(LEN(I3),I3,J3)),"",LEN(I3),I3,J3))
View 9 Replies
View Related
Mar 29, 2008
I have a section of code that takes SO long, but I have to have it. Bascially, I need a pivot field to be set to "All", but there HAS to be a faster way. Here's my
Sub FloorCompareSetter()
Dim pt As PivotTable
Dim pi As PivotItem
Set pt = ActiveSheet.PivotTables("PinPointPivot")
' Speeds up code dramatically
pt.ManualUpdate = True
'Set the floor comparison for managers, coaches, and reps
' Make sure all PivotItems along line are visible
For Each pi In _
pt.PivotFields("Manager").PivotItems
pi.Visible = True
Next pi
pt.ManualUpdate = False
End Sub
Auto Merged Post Until 24 Hrs Passes;Also, note that I have used other techniques to speed up the process:
With Application
. ScreenUpdating = False
.EnableEvents = False
.Calculation = xlManual
End With
View 8 Replies
View Related
Jun 19, 2008
I've got 4 pivot tables (all derived from the same base data) on 4 separate worksheets. I've been able to (with this help of this site) to use VBA to hide pivot items on all of these sheets using a list on a user form. Hide/Show Pivot Table Field Items. Hide Pivot Table Fields Pivot Items by Criteria
I now need to be able to show all the pivot items on only 3 of the 4 pivot tables, with the 4th pivot table being left untouched. For ease assume that my sheets are sheet1, sheet2, sheet3, and sheet4. The tables I wish to update are on sheet2, sheet3 and sheet4. The pivot table on each sheet is called "PivotTable4" and the pivot item is called "Business". The pivot item contains 12 business names (Business1, Business2 etc etc)
Is there an easy way of doing this? I've spent the day looking through the internet and various "Dummies" books but with little success, I fear that I'm obviously below even Dummy level
View 5 Replies
View Related
Nov 3, 2013
I have three search boxes in XL , two are search from and to dates and the other is search be ref.
I can currently search by dates and ref but would like to show all records in the specified dates if the ref field is left blank.
I am using the query writer and referencing back to cells in XL. I don't use the wizard or SQL. I have tried many options and think I should be using a OR statement with a wildcard but can't seem to get the result, does the wildcard just show the blank cells in the actual data?
View 1 Replies
View Related
Mar 30, 2007
Attached are two files. I want to make the "ORIGINAL" file look like the "DESIRED_OUTPUT" file using VBA.
View 3 Replies
View Related
Jun 11, 2014
I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
View 3 Replies
View Related
Jul 2, 2014
Basically I have a form where the list can expand and contract so there will always be varying row lengths.
What I would like to see is a drop down list that shows a) the actual populated field and b) a description of the field when the drop down list is present.
I believe this can be done with a combo box however that would be a lot of work.
View 1 Replies
View Related
Feb 10, 2009
I am trying to do a query against my database using MsQuery, but I am having a problem with it...
One of the tables in my database stores information as Binary (Bits) instead of actual text.... When I create the Query in MsQuery, the text is displayed as desired...but when I send it to Excel that column is not displayed..
Does anyone have any ideas on how I can get it to send the column to Excel?
See attached for what I mean. The Bits column shows in MSQuery, but not in Excel.
View 14 Replies
View Related
Sep 15, 2014
Once i identify the PivotField, how can i filter it to be > than Date?
View 2 Replies
View Related
May 7, 2014
why the Group Field option is not available in my Pivot Table. Other Pivot Tables in the same document, using data formatted the same way will let me format the data (the original data is in MM/DD/YY [h]:mm format). I have floored my data so that I can group by hour of the day, but it's not letting me do that.
View 3 Replies
View Related
Jul 5, 2014
I have two fields in pivot table, "HATA TOPLAMI" and "SIRA NO". "Hata toplamı" is sum of items, and "Sıra no" is count of items. İ want to divide these two fields and add it to the pivot table, like "HATA TOPLAMI" / "SIRA NO". I have tried calculated field function from pivot table. İ wrote "="HATA TOPLAMI" / "SIRA NO"". But the summary is false. I want to divide Sum of "Hata toplamı" and count of "Sıra no" but instead it divides with sum of "sıra no". Is there a way to do this?
View 3 Replies
View Related
Jan 9, 2014
I have a problem in expanding/collapsing fields in pivot table.
I have source table with GROUP, SUBGROUP, ACCOUNT and AMOUNT. In pivot table I've put GROUP, SUBGROUP and ACCOUNT in Row labels respectivly, and AMOUNT in values. There are same names in SUBGROUP for different names in GROUP. (for example: groups are Production costs and Distribution costs and in each of them there are subgroups Personnel costs and Other costs).
The question is: Is it possible to expand only field Other costs in group Distribution costs while field Other costs in group Production costs stays collapsed?
View 2 Replies
View Related
Jan 21, 2014
Can I add a calculated field formulas in Excel pivot table. Such as CONCATENATE?
View 2 Replies
View Related
Mar 26, 2014
Ihave a pivot table that takes data from a table, groups the duplicate items and adds their values up - so it shows just one entry for each item. I now want to add a calculated field in there so that I can divide one of the fields into another.
View 14 Replies
View Related
Feb 23, 2009
I have attached a simple test file. The data tab has two columns in the pivot range. The third column is _not_ in the pivot range, but is there to show the result I'm trying to get with the pivot.
The idea is to count the number of people whose entry dates are greater than 2/1/2009. My third data column gives a correct result, but a similar formula in the calculated field of the pivot table gives a completely wrong result (a date), where my goal is to generate a zero, a one, or a sum of zeros and ones.
It could be a formatting issue, but that would not explain why all the pivot results have the _same_ wrong answer.
I'm new to PTs and calculated fields, and expect I've made a naive mistake that an expert could easily spot.
View 3 Replies
View Related
Oct 9, 2009
I have a pivot table with Sales and Budget, if i need to find the difference in pivot table i think i need to use field settings, however i am not getting the result
I have attached the same file for reference
View 6 Replies
View Related
Jun 19, 2012
I have a pivot table with 2 row filters (dept and name) and then three columns - Year 1, Year 2. I need to add a calculated field inbetween Year 1 and 2 to show the variance in dollars from ( Year1-Year2) as well as an additonal a column that shows the percentage change between the tw o years . I know I can copy this over and add formuals in Excel but I need to retain the features of the pivot tables due to the 2 row filters?
View 1 Replies
View Related
Jun 19, 2012
I want to show the field name (i.e Surname) before the value is shown in the Pivot Table. for Example if the Field is Surname and the value is 'Smith', I want to show - Surname Smith
View 1 Replies
View Related
Apr 13, 2013
I've created a Pivot Table with 30+ fields. I've recorded the following macro to add the first field. I need modifying the code so that it looks for and adds every field automatically. It'd save a lot of time.
Code:
Sub PTAdd()
'
' PTAdd Macro
'
'
With ActiveSheet.PivotTables("PivotTable3").PivotFields("Assigned To")
.Orientation = xlRowField
.Position = 1
End With
End Sub
View 4 Replies
View Related
Sep 23, 2013
I have created a Pivot Table from 11 Woksheets, each sheet in named by Country.
When I create the Pivot table I end up with 4 fields named, Row, Column, Value, Page1
How can I change the Page1 field?, as it names the Worksheets as Item1, etc which is confusing when I try to Pivot Down to a specicifc country
View 4 Replies
View Related
Jan 12, 2009
on the pivot table field list-enable on the right hand side of the screen, only after that the needed fields can be dropped in.
Is there any other method to draw the pivot table?
View 9 Replies
View Related
