we are having a excel sheet which has data in it.
ex:
In sheet3:
D |F
Columns: Logic |Field
Rows: market |business
proposed |consumer
In sheet2:
A |B
List of sheet | Field
sheet3 |business
sheet4 |other
In Sheet1:
A |B
List of sheet |Field
sheet3 |consumer
When a user points to the particular cell(f2,f3) in column F of sheet3, it should display a message weather the data in particular cell is in which sheet( Sheet1 or sheet2 or not specified) and hyperlink must be displayed. when we click on the hyperlink it should go to the data particular row of the sheet.(Sheet1 or sheet2)..
I'd like to have a warning message pop up if the value of column AF is 3 or less.
Column AF is counting entries in columns E:I by using the formula
=COUNTBLANK(E1:I1)
to create the value
A value of 5 is OK (no data in E to I), and 4 is also fine (just one entry in E to I) A value of 3 or less, indicating more than one column in E to I having data, needs to display the message. Presently I have a conditional format on another column to display red background when AF is 3 or less, but it's a little ambiguous, so a message would be neater!
Codes are entered manually only in Column A starting at A1..A10000+ ranges.
As Unique codes are entered ie. 1234 or 2345 or 3456 in the next empty cell down, I need a specific popup message for each of the three codes instructing the user what to do next.
I want to create a pop up message showing count of cells turned red,each time the workbooked are opened.like column "I" has two dates in red colour,so the pop up will say "you have 2 contracts expired"
I have this code and would like that when you change the Target.Value it would pop a confirmation box with yes or no option. I know how to implement this for a button, but cant figure how do i do it with this code.
I am building a macro that deals with a lot of data and takes several minutes to run. I want to display a message to the user stating "Calculating..." while the calculating is taking place. I got the idea to use a userForm with a label on it. The problem is that excel waits for input from the userform before continuing the calculations.
How do I display the userform, continue doing the calculations, and then hide the userform when the calculations are complete? (without any input from the user)
I have the below code to iterate and copy/paste data.
Code: Application.DisplayAlerts = False Dim r As Range Set r = ThisWorkbook.Sheets("POList").Range("A2:A150")
[Code]...
This works fine, but I always get a message saying:
"Data on the Clipboard is not the same size and shape as the selected area. Do you want to paste the data anyway?"
The method completes when I click OK, but I am having to do this hundreds of time as there are a lot of files to be created. Is there a way to stop this message?
I have a worksheet with 3 cells in it. One cell is "Total", the second cell is "Adjustment" and the third cell is "Variance".
How can I create a popup message that states "Adjustment is Below the Total" and show the variance in the Variance cell in the event that the Adjustment value is below the Total value ?
Im trying to come up with a popup message That informs the user that the quanity they entered is not divisible by 12. Here is what I got so far:
The Range("D" & Target.Row) = "6' PANELS WITH STANDS"( this is the item chosen by the user via a drop down) Then they enter the quanity in Range("A" & Target.Row)
So if the item chosen in Column "D" is "6' PANELS WITH STANDS" and they enter the quanity in Column "A" and it is not divisible by 12 you would then get the message letting you know that.
I am writing code in Excel VBA and trying to control power-point. at the end there is message-box pop up. Everything runs fine.
But at the end I have go bottom windows bar and click on the excel file then message box comes up, otherwise excel tag keeps blinking at the bottom. I want to add something to code so message box in excel file is pop-up automatically without me clicking on excel file.
The piece of the script which I'm having difficulty with is this:
Code: For Each cell In Range("B7:B400") If cell.Value = "No" Then MsgBox "If " & cell.Offset(0, 1).Value & " has left R&D, please remember to delete any future resource forecasts" End If Next
When the cell value has changed to 'No' the pop up message appears, but for some strange reason the message is shown 5 times, despite their being only one record.The other problem I have is if I add another record and change the value to 'No' in column B, the message is shown twice, once for the previous record and the second for the new.
Is it possible to have an automatic pop up (warning) message if the (contract) date (in cell U3) expires in three months. In the message should also be mentioned the contents of cell A3 + the contents of cell K3 + the contents of cell U3. I don't want to use conditional format but need to show a warning.
I have an excel file with many worksheets. I want to get a pop up message providing definitions of different subjects when they are entered from a drop down list in a specific range within a column to improve the users understanding of the subjects.
Worksheet 1 Range (where I want the pop up message to be valid): J85:J385 Subjects from drop down list in specified range: "x,y,z" Pop up message: "Definitions of x,y,z"
Do I have to make a new module, or write the macro in the selected worksheet? What should be the settings of the macro (general, worksheet, declarations etc.)
I am coding a right-click popup and need some help specifying the range to show in the popup. The code is listed below.
How I can I adjust this code to show the range O400:O440 only? Right now it shows the entire column from O400 down.
Private Sub Worksheet_BeforeRightClick(ByVal _ Target As Range, Cancel As Boolean) Dim objBar As CommandBar Dim objButton As CommandBarButton Dim introw As Integer introw = 400
Cancel = True On Error Resume Next Application.CommandBars("avail").Delete On Error GoTo 0 Set objBar = Application.CommandBars.Add("avail", msoBarPopup) Do Until IsEmpty(Cells(introw, 15)) Set objButton = objBar.Controls.Add With objButton .Caption = Cells(introw, 15).Value End With introw = introw + 1 Loop objBar.ShowPopup End Sub
This is the only sheet that the users this is distributed to can see. The top two cells are dropdown boxes where users select what they need, then the rest of the table populates based off of those. It pulls info from this table:
My question is regarding the special notes. Sometimes the notes can be fairly lengthy so it doesn't display properly in the cell and even if it did it would be HUGE. So my question is: is it possible to create a hyperlink that when clicked would open up a message box containing the special handling notes in the table?
On sheet4 is a list of dates and I named that range as UPDATES2013. Each cell in that range is a hyperlink. Sheet1 cell I3 is a data validation list with the named range UPDATES2013 as the list. When a selection from Cell I3 is made I can get it to follow they hyperlink with the code I have. The problem I am having is if there is no file found, then I would like my Userform1 to show. I have tried several different things with the code, but every time I think Im going to get it to work....it doesn't. It either wont show the Userform at all, or it shows it even if the file is found. I am currently putting the code to run the macro on the worksheet module using the worksheet_change event.
One last thing...I also have hyperlinks throughout Sheet1 that will lead to the same files as in the named range UPDATES2013 from sheet4. I need the same thing to happen if they click one of these hyperlinks instead of using the data validation list in Cell I3. Is there a way to make one code that will show Useform1 if a hyperlink is selected and the file cannot be located (whether it be by the individual cells on sheet1...or the data validation list in Cell I3)?Here is the code I am using right now.
VB: Private Sub Worksheet_Change(ByVal Target As Range) DoFollow2013 ActiveCell End Sub [code]....
I need to refer the LAST ROW OF COLUMN "D" to appear in the message box for the below code along with " Receipt number" which is in Sheet2.
Sub saveit() With Sheets(2) r = .Range("B65536").End(xlUp).Row + 1 InvN = Cells(15, 4).Text
If Range("c18") = "" Or Range("c20") = "" Or Range("c20") = "" Or Range("c24") = "" Then MsgBox "Please fill all required fields", vbCritical, " Missing data"
This seems like a very simple question but I can't find the answer that I'm looking for. I have a spreadsheet with a drop-down ( validation) list. Based on what the person selects, I then would like to have a message box to come that would direct them that certain cells then need to be filled in.
Is it possible to display a dialog box or msgbox that doesnt have an OK button ?
i.e I want a message that comes up on the screen that says "Links Updating...Please Wait" which then automatically changes to "Links Sucessfully Updated" on completion...I dont want the macro to be interrupted by the msgbox/dialog....
I have a spreadsheet where I have input all of my technicians service calls and installations.
In Column C Row 5 and up to the max I assume because I'm not sure how many rows I would use in a year, I have an estimated completion date.
In Column D and the same Rows as above I will input the Actual Completion date.
What I want is if the current date is past the estimated completion date (Column C) and there is no date entered in the Actual Completion date (Column D) I would like a MsgBox to pop up saying "Please enter a new completion date on row _"
"_" would be which ever row the estimated completion date has expired without an actual completion date being entered.
I have a spreadsheet where when cell is clicked, it opens the hyperlink dialogue and allows a user to insert a hyperlink into the cell next to it.
Code: Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Count > 1 Then Exit Sub If Target.Column = 27 And Target.Row > 7 And Target.Row < 401 Then If Application.Dialogs(xlDialogInsertHyperlink).Show Then Target.Cut Target.Offset(, 1) End If End If End Sub
So if the cell AA8 is click it allows the user to insert a hyperlink and the hyperlink is pasted in to the cell AB8.
What I need: Is for the cell AA8 to say "Click to Add Hyperlink" and then once a hyperlink is added AB8 to say in the cell "Hyperlink to Folder".
