IF Date Formula: IF Formula, That States If A Date Is More Than A Month After The Date In The Cell Then It Is Timely
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Date Formula: Add A Month To A Date
i use dates a LOT in my job however if i want to add a month to a date the best i came up with is the following: BTW all dates are USA standard (m/d/y) A1 = 12/1/2008 Lets say i want to add 3 months but the day NEEDS to be 1 because of all of my array sumif's are based off of month 12/08, 2/09 etc, and in excel 12/08 actually translates to 12/1/08. So here is the formula I have been using for the last 4 years.... =date(year(a1),month(a1)+3,day(1) that seems a bit "Clunky" to me anyone have a better idea? do not tell me "=a1+30" or "31" because that does not work universally.
View Replies!
View Related
Date Range Formula: Beginning Of Month To End Of Month (which Is In The Current Row)
I have log data in two columns: Column A: Date/time (at 30 minute intervals) Column B: Numeric data On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C. The end of the range is determined by the month in the current row. I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month. I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach. Manual =IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
View Replies!
View Related
Date Month And Sum Formula
In the Total column, I would like to determine what the total would be as from the start date till the current date Columns "C:I" has the dates and the Monthly applicable rates associated. (in this example, they are annual dates, but it may be that rates change in between a year as well) In the first set of details (Mr A), the start date is 01/10/2005 Since Mr A only begins 01/10/2005, the rates from 01/07/2004 - 30/06/2005 ($9) would not apply. However the rates from 01/07/2005 - 30/06/2006 ($8) would be applicable for Mr A for the period 01/10/2005 - 30/06/2006 (ie.9 months) ....
View Replies!
View Related
Formula For Date Of Last Monday Of The Month
This formula on the forum has helped me to find the first day I specify of the month of a certain year. (here a monday in august of the year specified in B1) =DATE(B1;8;8-WEEKDAY(DATE(B1;8;1);3)-IF(WEEKDAY(DATE(B1;8;1);3)=0;7;0)) As I'm not really good at understanding the formula (I get confused with the =0;7;0 bit), even though I can make it work I'd like to know how I can find the a last specific day (mo-su) in a month.
View Replies!
View Related
Month End Date Formula
Is there a formula in excel that will automatically populate a field with the prior months end date? For example - If my spreadsheet is opened on March 25, I would like the date in cell A1 to read 2/28/07.
View Replies!
View Related
Formula To Calculate Date End Of Prev Month
I have a worksheet where the current months date is entered in cell E1 (format dd/mm/yyyy) , using an input box. I need a formula the will calculate the previous months month end date in cell A6 and the month end prior to the date calculated in A6 in cell A13. where the dates start with 31 for eg 31/01/2008 , then my formula works, but if it starts with 30, 29 or 28, then obviously it does not work. I would like a formula that will calculate these previous month end dates correctly. See example below ....
View Replies!
View Related
Date Formula With Variable Date & Comparison Operator
I have a date in cell A1. I have an operator in cell A2. This info is then merged in to cell A3 with the following formula: =A2&TEXT(A1,"dd/mm/yyyy"). My data range is called "wc_date_of_loss". I want to use this info in a SUMPRODUCT formula (as the dates and operators can be changed by the end user). What's the correct syntax for that? =SUMPRODUCT(--(wc_date_of_loss&A3)) =SUMPRODUCT(--(wc_date_of_loss=A3)) =SUMPRODUCT(--(wc_date_of_loss=TEXT(A2&A1,"general,dd/mm/yyyy")))
View Replies!
View Related
Formula For Date Minus Date = Number Of Days
I was wondering if anyone knows how I could enter a date in one cell, then another date in a second cell and in a third cell have it have it so it minuses the first date from the second and calculates the difference outputted in number of days. Example: 04/31/08 - 04/01/08 = 30 (days)
View Replies!
View Related
Formula Date Result Showing Number Not Date
I’m trying to resolve this issue and would appreciate some help. Scenario I have a tracking sheet that tracks development of work to be completed by individuals. I have a due date column that shows when the work should be completed. Once the work has been completed, the user enters his completion date. I have a formula that provides an overdue warning (Completion date – today’s date) and some conditional formatting. Problem When I copy the formula through all the cells in the column I get a number (example 39504) and this changes everyday. How can I eliminate this being shown as it throws out my average development day calculation?
View Replies!
View Related
Formula That Will Determine The Number Of Days That Fall In A Specific Month Based On A Date Range
I'm needing a formula that will determine the number of days that fall in a specific month based on a date range. For example, if I have a date range of 10/15/2009 to 01/13/2009, I need the formula to determine the number of days in each month within the range (October has 15 days in the date range; November has 30, December has 31, and January has 13.) I have a large spreadsheet that would be so much easier to manage with such a formula. Currently, my spreadsheet is setup as follows. I need the forumla automatically fill in the number of days under each month. Stard Date End Date Oct-09 Nov-09 Jan-10 Feb-10 10/15/2009 01/13/2009 I'm using Excel 2007.
View Replies!
View Related
Formula To Compare A Given Date To Todays Date
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due. Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today() Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
View Replies!
View Related
Count Date Cells Where Date Is Previous Month
I have a spreadsheet which I use to track when a work request is recieved, when we confirm the request and when we action the request. I have been trying to write some code to count the amount of requests, receipts and actions we have processed in the last month. My first column shows who the request is from The second shows date recieved The third shows date we send receipt The fourth shows the date actioned.
View Replies!
View Related
Weekday/workday Date 1 Month After The Last Contact Date
I have a list of clients that have specific requests waiting to be actioned, with a number of columns relating to client details and the status of the request across the top of the sheet. One of the columns (D) is "Last Contact Date", where I enter in the date that I last followed up with the client or made contact regarding their request. In the next column (E), I want the weekday/workday date 1 month after the Last Contact Date. I can use "=D2+DAY(30)" to give me the date 30 days later, or "=DATE(YEAR(D2),MONTH(D2)+1,DAY(D2))" to get one month later, however what I want is the nearest WORKDAY after this date. So, if the date is on a weekend, I need the Monday date instead.
View Replies!
View Related
Date/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub "dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
View Replies!
View Related
Date Minus A Date Formula
I am trying to add a formula that will give me the amount of days overdue by subtracting two dates: example Column D3 has 20/02/2008 Column D4 has 20/02/2009 how can I formulate a sum to give me the number of days overdue? How can I formulate a sum to then give me the number of plus days?
View Replies!
View Related
If Date Statement Formula Look At A Date
How can I have an if statement or other type of formula look at a date and add 26 months and determine if it's 26 months old yet. example assuming that November 4, 2005 is one day from being 26 months as of today That cell next to it would say "Available" Then the next it would say "Retired" because it hit the 26 month old period.
View Replies!
View Related
Return The Date In The Cell Containing The Formula
the last date input into a range covering multiple columns and return the date in the cell containing the formula): {=index(a9:n9,1,max(if(cell("format",a9:n9)="D4",column(a9:n9)))-column(a9)+1)} My column headings use this pattern: Column A: Date Column B: Amount Column C: Date Column D: Amount Column E: Date Column F: Amount and so on. When I use the above formula, I end up with data from the last amount column instead of the last date column.
View Replies!
View Related
Cell Date In Formula Reference
Using cell contents in formula to Populating cells with values from closed workbooks I am trying to create a summary table of data (e.g. orders) from previous weeks. In the table I am creating, the left hand column contains the Monday date of the week to be summarised along the row. I want the cells to show the values from other spreadsheets when those spreadsheets are closed, but I want the formula to pick up the date of the week that is in column A. I have attached a sample spreadsheet to try and make it clearer.
View Replies!
View Related
Compute The FuTure Date When Start Date,Lead Date,Weekly Offs,Leaves And Holidays
First and foremost I would like to congragulate you on this wondeful piece of code in the below link... The query was to get a future date excluding Fridays and Holidays... http://www.excelforum.com/excel-work...rkingdays.html I have a similar query and therefore I pasted this link... I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any.. Now Holidays would be official Public Holidays and Leaves would be taken by the employee.. The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
View Replies!
View Related
Formula To Find Date Based On A Cell Value
First one needs to look through a single row and find where the first cell with a value (text) in it, then finds the date that that cell is under. Second one needs to look through the same row to find the last cell that has a value (text), then finds the date again that that cell is under. Example workbook is attached
View Replies!
View Related
Add Todays Date When Cell Value=Y (but Not Using TODAY Formula)
I’ve been searching the forum but am struggling to find exactly the information I need! I’m trying to get a column of cells to update with the date that the cells contents change to “Y”. I had been using the formula =IF(I7="Y",TODAY(),"-") in cell J7 but this updates the date every day. I need this date to remain the same as when it’s first populated. I’ve been trying to cut and paste text from existing posts into the Visual Basic code but am new to this so am not getting the results I need. I had tried: Private Sub Worksheet_Change(ByVal Target As Excel.Range) 'will put date in column B when something is put in A If Target.Column = 9 Then Target.Offset(0, 1).Value = Date End If End Sub But this caused all sorts of problems! I then tried messing around with: Option Compare Text Private Sub Worksheet_Change(ByVal Target As Excel.Range) On Error GoTo enditall Application.EnableEvents = False If Target.Column = "I" Then If Target.Value = "Y" Then Excel.Range("J").Value = Date End If End If enditall: Application.EnableEvents = True End Sub But this doesn’t work either. In fact, both these codes are probably riddled with errors as I’ve been trying to learn by trial and error!
View Replies!
View Related
Reference Part Workbook Name In Formula From Date In Cell
i want to return a value from a cell in another workbook where part of the the workbook name is determined by a date set on the current open sheet. so on my open sheet i have a cell where the user can change the date and i want the below formula to then use the date to look at the relevant file. any ideas would be appreciated. know how to do this in VBA but no clue with formulas. what i am trying to do is concatenate part of a file name and a cell value which contans a date =VLOOKUP(A4,[accountsummary17022008.xls]Sheet1!$A:$B,2,FALSE)
View Replies!
View Related
Date Range: Reference A Single Date And Output Date Ranges
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like: Monday Date: 10/13/08 October 19 – October 25 Sunday 19 Monday 20 Tuesday 21 Wednesday 22 Thursday 23 Friday 24 Saturday 25 and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
View Replies!
View Related
Date Formula & Add If Statement To The Existing Formula
I currently use the following formula: =workday(H21,H23,J20:J34) which calculates my date based the date entered in cell H21. While testing I realized that I needed to add another variable to the formula for a specific scenario. When my Date in H21 is less than todays date I require another workday formula to be calculated. How can I add this if statement to the existing formula?
View Replies!
View Related
Automatic Current Date Formula Extracts From Specific Cell
formula that can automatically use the current month date to extract information from other cells on my spreadsheet. For example: This formula should be located in cell C6. Cells D6, F6, H6, J6, L6, N6, P6, R6, T6, V6, X6, and Z6 (these cells correspond to the months of the year, January to December respectively) contain the values I need. The month names are labeled above in row five. Let's say the current month is March, I need the formula in C6 to automatically know that it is the month of March and to pull the information from cell H6 (which is the March cell). Then when April comes along, it will know that it is April and to only pull the information from cell J6; and so on until the end of the year.
View Replies!
View Related
If Cell Date A Certain Month Then
I am trying to develop a SUMIF formula that looks up a date mmddyyyy and only keys off the month in the range cells. Example: =SUMIF(B7,"August",E7:F7) B7 has the full date in ie. 8/10/2007 or 10-Aug-2007. My work around has been to separate out the date, month, and year into three different columns. Can you define the date by a range? Example:=IF(AND(B6>=8/1/2007,B6<=8/31/2007),SUM(E6:F6), 0) ... this doesn't work,
View Replies!
View Related
Formula To Show A Date Range Based On The Amount Shown In Another Cell
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc. I added a new cell called Track Back on the employee search sheet. What I want to do is only show variances for the amount of days back selected in the Track Back cell. For example if I select the last 30 days, only the last 30 days would show up below in the sheet. I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
View Replies!
View Related
Month Serial Without Date In Cell
That is what my spreadsheet looks like. I have about 130 in the sheet I'm working on now. A is my date cell, B is my total for that date, C is the cell I have made for the =Month(serial_number). The problem i'm having is how do I get it to not put a number in my "C" cell when there isn't a month present? This sheet will change weekly, so I've went down to 300 with my month formula. When entering the formula in the cells that do not have the month, it automatically inserts a 1 that throws the count off for my entire sheet. How can I leave the code for my month in without having it add a number when there's no month?
View Replies!
View Related
Show Month Of Date Added In Cell
In one cell the user has to fill in a date, example 20.3.2008 and then in another cell he/she has to choose a month from a list (january-december). I need a macro that checks that the month stated in the date cell is the same as the month selected in the other list cell.
View Replies!
View Related
Place Month Of Date Cell On Another Worksheet
I have two workbooks, one a database that accumulates data over time, and the other a monthly report that needs to be populated based on information from the database. When moving data between the two, the following works fine (snipped a lot for ease of reading): Workbooks.Open (database) ', Password:= / Workbooks(reportbook). Sheets("Sheet1"). Range("A1").Value = month(Cells(282, 5)) As you can see, it simply puts the month from a cell in the database into the report workbook. However, if I change Range("A1") to Cells(1,1) I get a runtime error: Workbooks.Open (database) ', Password:= / Workbooks(reportbook).Sheets("Sheet1").Cells(1, 1).Value = month(Cells(282, 5)) I can generally work around this issue by changing the active workbook, but doing so is a big pain. Is there any way to use the second bit of code without popping an error message?
View Replies!
View Related
Check Cell Has Date & Insert Current Static Date
I have a user form that when a command button is clicked it enters the data from the from into coloums a,b,c,etc. I have code to do this but I want to add code to add a static date in coloum B based on if coloum A had data entered from the form. I need the date not to change to current date when the file is reopened. I am trying to elimate a date text box in the form. I have a link to the file http://www.box.net/shared/zdtsjv0qos
View Replies!
View Related
Calculate Date Difference & Use Current Date If Cell Empty
i am trying to create a forumla in a column (D in my expamle below) to count the number of days between two dates. Knowing that col D will change everytime the @now date changes - but thats ok.. COL A COL B COL D ROW 1 Open Date Closed Date Count of days open ROW 2 4/1/07 BLANK CELL Formula result here ROW 3 4/1/07 9/5/07 Formula result here if col b has a date then subrtract col a from b and display the # result, if col b is blank then subtract col a from location I store the @ now date - say Col ZZ Row 99? so no matter there is a count of number of days in every row in column D
View Replies!
View Related
VBA Comparing Date In Cell To Today's Date
I need to VBA code that will loop through the active sheet for all rows, column C2 through however many rows there are. Col C contains a date in the format: mm/dd/yyyy. I need the VBA to compare this date to today's date+30 days and if the date in C2, etc. is greater than today's date + 30 days, shade the row a particular background color (e.g., 3).
View Replies!
View Related
If Date Cell Less Than Todays Date Calculate Difference In Days
I have column B with a heading "Days Remaining" and column L with a heading "Deadline". starting with row 5, I need to be able to enter a date in L5 and see the days I have left, from that day untill today, on B5. I need to then be able to enter a date into L6 and see a result in B6 and on and on. Then I need to be able to insert or delete a column and have the formulas still work in the columns with the heading "Days Remaining" and "Deadline"
View Replies!
View Related
Search & Replace Date In Date And Time Cell
I have several hundred rows of date/times which I need to modify just the date (for example 08/23/2007 11:00 to 08/15/2008 11:00). Each row may have a different time so it is just the date I'm targeting for change. If I manually use the replace dialog, replacing 08/23/2007 with 08/15/2008 works just fine. However, if in code I attempt to use the Cells.Replace function, it does not locate any data to change. I have found that if I search for the string 8/23/2007, the dates are located and changed. Only when I attempt to find the fully formatted date 08/23/2007 does the function fail.
View Replies!
View Related
Prevent Automatic Date Format When Referencing Date Cell
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View Replies!
View Related
|
TRACKER
