I would like to create a financial modeling spreadsheet. Basically my problem is this; I want to have a month by month row for 5 years. For the value of each one I would like it to increase by 950 per month automatically.
View 4 RepliesI have 22-08-08 in Cell A2 I would like it to change to 22-09-08 on 23-08-08 ideally using edate (but not neccessarily).
Perhaps I can add a formula with conditional formatting eg formula is = "On Today()+1 Add 1 month to cell A2"
How do I add month automatically on a date? if my begin date is 06/01/09 and I want to add 6 months to it how can I populate:
06/01/09
07/01/09
08/01/09
09/01/09
10/01/09
11/01/09
I'm using sheet for ledger. For entering date I use =today() but I want to do that in date column(A) I set a formula only once that if I enter data in 2nd column it automatically add today date and if data enter day after tomorrow it will add corresponding date. Is this possible?
View 9 Replies View RelatedI have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View RelatedI need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedI want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
I currently have an excel spreadsheet which has monhtly sales totals in it. We have some forumla that compare Year To Date figures with YTD Budgets and we also wish to compare Current Year To Date to Previous Year To Date. The problem I have now is that it currently means updating the range formula for Year to Date Budget and I will also be required to update the Previous Year To Date sales manually too.
Im looking for the spreadsheet to re-calculate theses figures based on the month that they are in. For instance should I be working on the Spreadsheet in January, it will only use the values in the budget sheet from Apr-DEC. Currently I woud be required to change the range in the formual to take into account the extra cell required.
I am trying to write a program that needs to select a different cell everytime it is ran. For example, this month when it runs I need it to select cell BL137. Next time it is ran it will need to select cell BL138. Month after BL139. The cell it selects will always be in the same column (column BL) and the cell number always increases by the same amount (1).
View 6 Replies View RelatedI have been a long time lurker of MrExcel, but have always been able to find the answer to my question within the forums. However, I am stumped. I am trying to create a pivot table that will show incremental goals by week, when I have a set goal for the month already. However, I don't want to do a straight average across all the weeks in a month. I would like to see it continually grow during the month. How can i mathmatically do that in Excel?
For example:
Jim had 191 sales leads in the last week of the month in December. Of those 191, he closed 29 of them, for a 15.2% close rate. I want to see him raise that by 6% by next December, so (6%/12 (# months) = .5%). He will need to increase his close rate to 15.7% by the end of January. So, for the month of January, we expect 955 sales leads (5*191) and 149.935 (15.7% of 955) closed. However, I don't want to say Week 1, 2, 3, 4, and 5 in January should all have 29.987 closes, I would like to be able to say week 1 = 25, week 2 = 27 week 3 = 30 week 4 = 32 and week 5 = 34, but have that incremental increase to total 149.935.
There is (sadly) no changing the percents, or the closed leads number. These have already been submitted and aproved. I just have to be able to let people see the goals by week now, but if they want to see the monthly goal, it must equal what has been approved.
I have attached a spreadsheet, in which I have highlighted the following cells (I2, J2, G31 and I31)
View 7 Replies View RelatedIn a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I have a spreadsheet for monthly supplies. In row 1 is Jan – Dec and in the row 2 below are empty cells where there will be a total for that month’s purchases. I want a conditional format formula to automatically bold and highlight the current month’s total and month name.
Also, when I enter February totals next month and that number is input into February’s total, I want that month and total to bold and highlight BUT I also want the previous month’s bold and highlight to vanish at the same time. Is this possible?
I have a range (M6:BM6) which consists of week end dates = every Friday (M6 =
5/8/09; BM=5/7/10). I would like to have the range adjusted based on when a
cell (B3) is updated. For example, currently B3=5/5/09 and M6=5/8/09 (week
end date of B3). If B3 was updated to 5/12, I would like to have the range
automatically updated to M6=5/15/09, N6=5/22/09....BM=5/14/10. I could do
this with excel formulas in the sheet but would like to macro code adjust the
values in the range rather than formulas.
These ranges are used in other macros and works better with values rather than formulas.
how to make a number automatically increase by a percentage at a certain interval.
For example, 1-12 need to be 3% of 100, so, 3. Then, from 13-24 need to be 3.5% of 100, and so on. Does anyone know how to do this?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies View Relatedhow to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
In the Total column, I would like to determine what the total would be as from the start date till the current date
Columns "C:I" has the dates and the Monthly applicable rates associated.
(in this example, they are annual dates, but it may be that rates change in between a year as well)
In the first set of details (Mr A), the start date is 01/10/2005
Since Mr A only begins 01/10/2005, the rates from 01/07/2004 - 30/06/2005 ($9) would not apply.
However the rates from 01/07/2005 - 30/06/2006 ($8) would be applicable for Mr A for the period 01/10/2005 - 30/06/2006 (ie.9 months) ....
Is there a formula in excel that will automatically populate a field with the prior months end date? For example - If my spreadsheet is opened on March 25, I would like the date in cell A1 to read 2/28/07.
View 3 Replies View RelatedI m trying to write a formula for my financial model. If anyone can take a stab at a solution. I'm trying to write a formula that will equally distribute revenue either over the next 1 month, 2 month or 3 month period depending on size of the deal.
Details:
Sales will fit in 1 of 3 categories. Less than 25k; between 25k & 100k; greater than 100k.
- if under $25K, recognize in next month (month N+ 1)
- $25K-100K, recognize in two equal parts in months N + 1 and N + 2
- over $100K, recognize in three equal parts over 3 months
N + 1, N + 2, N + 3 ...
I uploaded an example file.
Now, what I need to accomplish is that the D1 and D3's in sheet 2 need to result in a date next to the correct country (the date (in full) must be the first monday of the correct week). I find it quit difficult to do this because in sheet 2 you have once the country name, but several possible dates. So in sheet 1 there must be a date for every D1 or D3 but under each other.
The second problem is that I need to accomplish to get a "x" in sheet 3 under the correct month where there is an D1 or D3 in sheet 2 (week).
So I need to go from a week to a month and this can be for one country 1, 2, 3 or even more months (it depends from the D1 and D3's in sheet 2).
I have a sheet where the columns have the month end date for each date, ex January 31,2014 February 28, 2014, March 31, 2014 etc. These dates are used in another formula to compare to the current date and if the current date is past the result is different from when if the date is in the future.
I would like a formula that would update the Month end date when we enter a new year. So for example once we get to January 1 2015 my date would change to January 31,2015, February 28, 2015, March 31, 2015. this would note be dependent on the system date but on the date in another cell.
This formula on the forum has helped me to find the first day I specify of the month of a certain year. (here a monday in august of the year specified in B1)
=DATE(B1;8;8-WEEKDAY(DATE(B1;8;1);3)-IF(WEEKDAY(DATE(B1;8;1);3)=0;7;0))
As I'm not really good at understanding the formula (I get confused with the =0;7;0 bit), even though I can make it work I'd like to know how I can find the a last specific day (mo-su) in a month.
=CHOOSE(WEEKDAY("1 Jan " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
where C1 = the year 2006. B1 has the month Jan and I want to input that into my formula, so when I change the month, it automatically will change my formula. I tried =CHOOSE(WEEKDAY("1 $B$1 " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
B1 = Jan
C1 = 2006
I am trying to create a spreadsheet that will automatically increase the work order number by 1. The cell will always be in the same place. The idea is that when the file is opened it populates the number. After being closed and reopened the number will be 1 higher than the previous.
The page will reused by various people to create and print work requests for my mechanics, I want it to assign the W/O automatically.
Basically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
i use dates a LOT in my job however if i want to add a month to a date the best i came up with is the following:
BTW all dates are USA standard (m/d/y)
A1 = 12/1/2008
Lets say i want to add 3 months but the day NEEDS to be 1 because of all of my array sumif's are based off of month 12/08, 2/09 etc, and in excel 12/08 actually translates to 12/1/08. So here is the formula I have been using for the last 4 years....
=date(year(a1),month(a1)+3,day(1)
that seems a bit "Clunky" to me anyone have a better idea?
do not tell me "=a1+30" or "31" because that does not work universally.
What is the simple formula to be used to subract N months from MM.YYYY format
ex:1
Here N=2, MM=04,YYYY=2014
04.2014 minus 2 month means output should be 02.2014
ex:2
02.2014 minus 2 month means output should be 12.2013