I have 2 columns of figures. One column has a defined name of 'Estimated Value' and the other column 'Actual Value'
My IF statement should simply read "=If(Estimate>Actual,Text color RED, Text Color Black)
My attempts at finding the code for the True/False statements are legion and 'Conditional Formatting' does not appear to work
I am trying to make a cell change colour based on the partial content of another cell.
For example, cell A4 has a alpha-numeric sequence in it and I want cell B4 to turn blue if part of the sequence is ABD or F&C.
how I format the IF function to change the colour of the text in a cell, I know how to use conditional formating but it wont do what I need it to.
The formula I'm using (See Below) only inserts the word "Red" or "Green" in the cell it does not change the colour of the text.
=IF(H6=A1,"green",))
how hard would it be to chane the background colour of a cell when a certain word is entered into it? so someone would type 'james' and press enter then the cell would turn red....would only be in a set cell range..
View 9 Replies View RelatedI am using Excel 2003, my problem is that I have cells D4 & E4 with red text, when an entry is made in B4 (say $640, the amount can vary) I want the text in D4 & E4 to turn black. I have attached a section of the document in question.
View 5 Replies View RelatedI need to change the colour of a cell using VBA based on the input of a certain word. I have used teh below code but it doesn't pick up different variations of the word
Dim cell As Range
For Each cell In Range("E2:E500")
If cell.Value = "Check" Then[code]....
This code works fine (i have put it into worksheet change) when I use "Check and Mark and Chase" but some users are bound not to use capitalised first letters and on these occasions the cell colours are not changing.
How to add something to thie code above to make it work for any variation of capitalisation?
So I have been playing around with the tab colors on my workbook and am trying to figure out the correlation between color brightness and the auto change from black text to white text. I've noticed that if the Green color value is higher, excel is more likely to use the black text. If Blue is high, white. Green takes precedence over Blue and Red is just kind of in its own world.how excel calculates this?
View 2 Replies View RelatedI need to see easily if my cell is giving a value by using a SUM. This is so I can see if the SUM has been taken off or overridden by typing in a number.
View 4 Replies View RelatedQtn.1 - Do i use 'Conditional formating' under 'Format' to change colour of Check-box text when 'checked'
I.e when ticked >> change colour of text to red
Qtn2 - If yes-, what's the syntax to put in 'Conditional formating' ?
i am looking for a formula, if i put it as plainly as i can then i hope someone can work it out for me!
if ad4 is greater or less than 30 then ad4 text is red, if ad4 is equal too 30 then text is green
I have a number of comment (all column D) that have lots of data in each one.
The data will appear like this (each new entry (new entry denoted by a date))
01-May 12:58:05 Liam
02-May 16:18:27 Josh
07-May 11:51:26 Bob
02-May 01:13:34 Terry
What i want to know is, can i change the colour of the text in the comment, if its todays date. So in this case 07-May 11:51:26 Bob goes red (its the 7th here for me).
Is there any way to change font style, size and colour of text in a combobox?
View 1 Replies View RelatedHow to colour cells depending on text in other cells, for example,
I would like cells D26:AA26 to turn light red if the letters 'FSM' are in cell 'E26' even if other text appears in it, eg 'SA+/FSM'
I have been playing about with conditional formatting but can seem to solve the mixed text issue?
I have included an example below,
Do you use a "*FSM*" around the formula?
[URL] ...........
I have a spreadsheet with several freeforms. I would like them to change backgroundcolour, if the content in a cell is equal to another cell.
Basically I would like my shape "Freeform1" to change backgroundcolour to RGB (0, 180, 0) if Sheet1.Range ("A1") = Sheet2.Range("D3").
If it's not the same content in both cells, I would like the freeform to remain unchanged, that's RGB (79, 129, 189).
This should happend automaticly, so I don't have to click the shape to make it happen.
I dont have that great knowledge in Excel but i wanted to try and run a
macro in an IF formula but realised that was not possible. I have now got a
formula that gives a value in a cell when i want the whole row to turn to
red, but im not sure how i can get a macro that will change the whole row to
red when that cell shows a value. Can anyone help on this matter?
I am tyring to do conditional formatting whereby if anything is entered in a cell i want the colour to change to say yellow and if nothing is entered just to leave blank.
View 9 Replies View RelatedHow can you change the colour of a cell (A1) using that number
eg
1=red2=orange3=white4=light blue5=Blue12345
OR
Make the cell with numbers above 0 go red and all cells with numbers below 0 go blue
If A1 contains 'good' then row A = red
I need an entire row to change colour if a particular cell in that row contains one particular word.
I am making a little Formula 1 Grand Prix spreadsheet, and would like to know how do i enter a number into a cell and the cell changes colour.
[Code] .....
So if i type when of these in a cell i want to to change to the colour corresponding to the chart.
I have the code below which fills a cell when doubleclicked. I would like to modify this to altenate between 3 different colours on each doubleclick.
View 2 Replies View RelatedHow I can change the background colour of cell C:2 depending on what other cell i click? Below a sample of the code im using Basically when i click B:2 i want C:2 to turn grey with the text on top.... Then when i click B:4 i want C:2 to turn Red.....
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Select Case Target.Address
Case Is = "$B$2"
Range("D2").Value = "No action needed connector is down" 'change this to suit
Case Is = "$B$3"
[Code].....
I would like to have the colour of a cell change within a spreadsheet anytime that a change has been made. I have used the worksheet_change function to change any text that has changed in a cell, however I would like to have the actual cell colour change if someone deletes anything from that cell. I figured that I could use the worksheet_change function for that as well however it is not working.
View 9 Replies View RelatedI dont understand how this event works.
I want a certain object to change colour when a certain cell = something.
I have 5 cells in the same row (C20:G20)
When i click on one of them i want it to either change the background of the selected cell or the background of the cell below it.
EG if i click on C20 either C20 or D20 the highlight black and change the text colour to white, or just change the background to grey.
i thought it might be something like Target.Offset(1, 0).BGColor = 6
i tried this>
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells = C20 Then
Target.Offset(1, 0).BGColor = 6
End If
End Sub
Trying to have this embedded in the worksheet private sub change section. I want it to change the value of these ranges when the target has a value in it. I'm getting an error though:
If Target.Address = "$E$27" Then
If Target.Value "" Then
Range("I25:J26,P25:P26,R25:S26").Interior.ColorIndex = White
Else
Range("H25:V31").Interior.ColorIndex = 15
End If
End If
I've found a great thread that answered part of my problem (Change colour of text on update of cell)
This code changes the colour of a cell when selected. With the application I'm trying to make I need this effect to only occur in a certain area say A10:D30
I'm trying to make a scheduling page that uses timebars to represent when people are working. I though if a user could click or highlight the hours and a time bar produced I could lookup to see what hour the timebar starts and ends and show the hours worked. I also need it to cycle through 5 different colours before returning to white.
Private Sub worksheet_change(ByVal target As Range)
target.Interior.ColorIndex = 4
End Sub
Is there any way to change the border color of a cell by running a subroutine? Here is my example:
Col 1
Col 2
1
2
3
4
I have an existing table with data that is updated daily ... more rows are added. Currently, the cell border is black. I would like to run a macro such that the column header is shaded grey and the borders turn into a shade of gray. I am interested in the 35% grey.
I am looking to change a row colour if any type of data is entered into a specific cell.
Context: In column H entitled 'Start Date' when someone enters a date n any format into this box, I want the whole row to change colour to easily see what projects have started and what ones havent.
I want to change the colour in a cell depending on the sum of two other cells.
ie
A3=1,B3=1
A4=2,B4=1
A5=1,B5=0
A6=2,B6=4
So i want if
A3+B3>2 THEN C3 TO HAVE GREEN COLOUR
A4+B4>2 THEN C4 TO HAVE GREEN COLOUR
A5+B5>2 THEN C5 TO HAVE GREEN COLOUR
A6+B6>2 THEN C6 TO HAVE GREEN COLOUR
SO IN THE END ONLY C4 AND C6 WILL HAVE GREEN COLOUR.
Is there any formula to do so with conditional formatting?
I am trying to devise a service schedule that has the installation date in say cell D4 and I would like this to automatically place a date a year from there in to cell E4, then 4 weeks before date comes round i would like the text cell to turn yellow, then on & after the date to turn red. Is this even possible?
View 12 Replies View Related