way to insert a Line where the (x) line on a chart is breakeven or the instance where it changes from positive to negative. I am doing this now by just drawing a line, however with a chart that is constantly updating the line does not adjust to this.
View 9 Replies
If I am trying to calculate the breakeven moment from a project that has an initial cost and a series of quarterly returns. This is easy to do visually but I cannot figure out how to arrive at the breakeven point from a data set such as this.
e.g. 50,000 spent at time 0
5,000 received in q1
10,000 received in q2
10,000 received in q3
10,000 received in q4
10,000 received in q5
10,000 received in q6
In which month will I break even?
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
View 7 Replies View RelatedI've got an excel sheet that lets people choose between 2 choices. I'm using scroll bars to make it easy for them to choose and visualize their preference with as little mouse clicks as possible. The scroll bar is only one sided though, meaning it starts from a min value to a max value.
I would like a scroll bar with a of 0, with the value increasing positively as the user scrolls to the left, and the value also increasing positively as it scrolls to the right.
I have a spreadsheet of invoices and credits memos (500+ rows). Is there a way to match the positive and negatives that match? For example if there is -40.39 in one cell and positive 40.39 in another that it could highlight both those cells. I was thinking to do it in conditional formatting however I can not get it to work. It does not have to be fancy I just need to highlight them because there will not be a lot that do actually match.
View 9 Replies View RelatedIs there a simple way to convert a positive number to a negative number ?
Fromto
10(10.00)
56(56.00)
116(116.00)
Additionally, would the same procedure work for time?
So if I had a column listing hours that looks like this:
10:05:00
4:34:00
2:18:06
is there a way to convert this to negative hours? Understandably, there are no such thing as negative hours, but I am trying to illustrate a situation where an internal procedure was completed x amount of hours before the specified start time.
My form has a combobox with three options "Withdrawal" "Deposit" "Fee". I want to make sure that whatever number a user puts into a textbox, if they select "Withdrawal" or "Fee" that number will be converted to a negative number, and if they select "Deposit" it will be positive. I have written the following code and am just wondering if there is some super slick way of doing it other than an if statement.
View 2 Replies View RelatedI would like to see that I am continually saving on a per-day basis (as well as overtime). I allowance myself an allowance each day, but some days, I need to spend more money than that. The best solution I have to is keep a running total for myself, so that each day is affected by the preceding days. Therefore, if I spend too much, I now have a small defecit that needs to be corrected. This method keep me on track as far as saving and spending.
Question (and I copied the actual data from my spreadsheet):
Without having to manual enter the final calculations (because this is just a simple part of an overall larger, more complex spreadsheet), can I generate the values in my Value Change row, based on the information from my Running Total row?
For example, Day 1 to Day 2, I was able to incease my running total from 233 to 354 (meaning that I had saved +121 that day). Of course, this is an easy subtraction problem (Day 2 - Day 1 = Value Change). From Day 2 to Day 3, I spent way too much. The running total fell to -1198, meaning that I spent 1552 too much (that day's value change is -1552). Again, this an easy subtraction (Day 3 - Day 2 = Value Change, just like the first example). From Day 3 to Day 4, I was able to reduce my running total -1063, meaning that I was able to save 135 that day. This is my problem. Day 4 - Day 3 does not equal the value change of + 135. To get this value, the preceding formula now has to change to ABS(Day 3) - ABS(Day 4).
This is the issue. I need a formula that can work normally when the numbers are postive or when the second value is larger (in terms of absolute value). On the other hand, it needs to recognize the special cases like Day 3 - Day 4. Is this some form of a conditional function?
Running Total 233354-1198-1063-878-658-933-807-657
Percentage Change51.93%-438.42%11.27%17.40%25.06%-41.79%13.50%18.59%
Value Change121-1552135185220-275126150
way using vba to match a -negative value to a postive value in a same column and delete the entire row? (debits and credits)
View 9 Replies View RelatedI have a forecast for a week, all days I type in, the real order, in the end of the week I got a difference between the forecast and the real orders. the difference can be positive or negative, in any case I want that difference to be added on the next cell on next week, plus the difference between the forecast and the real order from the day before, and so on.
I'm using this formula "E4*($L$3+1+IF(K4,ABS(K3/K4-1),0))" but if the real order is less than the forecast the formula add the difference increasing in a positive way, when what I want is decrease the value if the difference shows a negative tendency.
hope this make sense.
I attached a file with what I intend to do.
I keep getting the correct answer, but it returns it as negative and I need a positive answer.
View 1 Replies View RelatedI have to calculate percentages, lots of them,, have 4 scenarios
1.- positive / positive
2.- positive / negative
3.- negative / positive
4.- negative / negative
I wish to find a formula that covers all scenarios, have thousands of data to calculate
Using AVERAGEIF on a row containing both positive and negative values one can easily calculate the Average of only the positive or negative values. I need to filter the 20% outlier on each case, how can I do that with TRIMMEAN ?
This is an example of the current formula using Averageif for the positive values:
=IF(C3=0;0,0001;AVERAGEIF(Auxiliary!B29:BL29;">="&O3))
For now O3 can assumed to be 0.
Here it is i needed to get the total of all negative and positive value.
View 2 Replies View RelatedI am currently working on a project whereby I need to remove duplicate rows (containing both a positive and negative number). I've tried a few different formulas and macros but I'm running into a problem. It's wanting to remove ALL positive matches instead of one.
For example: Column BH has -4,4,4,-2,2,-1,1,
I need it remove those numbers that cross cancel and keep the one that doesn't have a partner.
Side note: Column A has an owner code, Column B a well code, and BH is the amount due.
This may be more of a math question rather than an Excel one.
If I have a spreadsheet with a cell that produces different negative number each time it is used, is there a way i can add a formula to make it a positive number.
So if Cell A1 showed -£244.22, I want to add an equation that changes if to £244.22
Cell A1 changes so it would need to do the same for any negative number within that cell.
For Example, I have a list of numbers like this
3
-4
6
5
-2
Now, I need to get the sum of all positive numbers & sum of all negative numbers in different cells. Is it Possible to get using Formulas.
The Order (& also the number) of the Positive & Negative Numbers varies.
In my sheet i got some negative and positive numbers -210(Negative) and 210(positive).
So when on F there is a Negative number on K must come (Yes).
And when on F there is a positive number on K must come (NO)
It must go on for all on F
Is there function for that in Excel what i got now.
I want to find the min and max numbers within a thread of numbers that has both positive and negative values. The key is that I want the smallest amount or the largest amount based on the number and not on the positive or negative.
For example, below is my list of numbers.
7
5
2
-5
-6
7
-8
-3
I want the min formula to return 2 and the max formula to return 8.
I wish to convert a negative figure Ie (-1,500) to positive. How do i go about it?
View 2 Replies View RelatedIn one column, I have a formula that will produce a positive or negative number. If the number is negative, I want it to be automatically transfered to the adjacent cell/column. I don't want a positive number transfered though.
View 9 Replies View Related************************************************************************>Microsoft Excel - Book2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29=ABCD1 amount Abs amtMark x when paried up 2 (43,746.73)43746.73x 3 43,746.73 43746.73x 4 43,746.73 43746.73 5 (60,579.30)60579.3 6 (60,579.30)60579.3x 7 60,579.30 60579.3x 8 (98,416.85)98416.85x 9 98,416.85 98416.85x 10 98,416.85 98416.85 11 (500,000.00)500000 12 (500,000.00)500000 13 (500,000.00)500000 14 (500,000.00)500000x 15 500,000.00 500000x 16 (700,000.00)700000 17 (700,000.00)700000 18 (700,000.00)700000x 19 (700,000.00)700000x 20 (700,000.00)700000x 21 (700,000.00)700000x 22 (700,000.00)700000x 23 (700,000.00)700000x 24 700,000.00 700000x 25 700,000.00 700000x 26 700,000.00 700000x 27 700,000.00 700000x 28 700,000.00 700000x 29 700,000.00 700000x Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,
I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week
Need to sort the following in excel:
(2,000.000)(1,000.000)(500.000)(200.000)200.000 500.000 1,000.000 2,000.000
to the following:
2,000.000 (2,000.000)1,000.000 (1,000.000)500.000 (500.000)200.000 (200.000)
How can I sort like this.
IF formula.
I am trying to subtract 2 numbers, and they are 4 different combinations of positive and negative numbers.
I wrote the formula as
=IF(A5*B5>0,IF(AND(A5*B54,458 2,367 (322)FALSE(1,277)1,751 FALSE
I have a colum of positive and negative numbers I want to sum all the numbers regardless of the sign. Example
-1500
8000
-2500
4000
=16000
I can not work in another colum or covert the negative numbers in another colum then add them up.
I need last cell to read 16000. What formula do I need?
I have created a Pivot table from a source data file that includes a document status column ('Type I Or C') (I for Invoice & C for Credit) and an Invoice / Credit value column (Invoiced Price). However the values for both invoices and credits are positive so when summed distort the total values.
I am attempting to create an additional column within the Pivot table to convert the credit note values to negative by inserting a calculated field under the formula tab, i.e.
=IF('Type I Or C'="C",-'Invoiced Price','Invoiced Price')
The above formula works fine in a standard worksheet but it is not reckonsing the "C" within the pivot table. If I manually change the value to numeric (i.e. 1 for Invoices and 2 for credits) it works fine, i.e =IF('Type I Or C'="2",-'Invoiced Price','Invoiced Price')
so it appears to be an alpha issue?
I'm trying to make a "weight-based" spreadsheet. I want to show a difference between numbers so if an item lost 5 lbs, there would be a "-5" and it would be in green font showing good.
For example, a box weighs 20 lbs and then drops down to 15 lbs. This would be a good result. So I would have 20 lbs in A4 and 15 lbs in A6 and I want to show the difference in A8. However, since I want the box to lose weight, I want it to show a negative value of "-5" in green font meaning it is good. And vice versa, I want it to show "+3" in red font if the box gained weight.
I can't really figure out how to get the signs working properly. I'm assuming to use an "if" function in where if the difference is a loss, show the negative sign and have it in green font. And if the difference is a gain, show the positive sign in red font.
I have a cell that always requires a negative currency number.
No doubt I will inadvertently enter a positive number now and then.
Is there a conditional format method or something that will take my cell entry and always change it to negative?
I need a formula that will display a 'yes' or 'no' if the following condition is met:
If the value of cell (L17) is greater than 10% positive variance, then 'YES' else 'NO'.
Currently the value of L17 is 14%, therefore should be a 'YES', however how can I get the following to work:
IF(AND(L17=<0,"NO",L17>10%,"YES"))
I apologise as I know there are too many arguements here but is there a way around this?
I've got 12 months worth of business accounts which have been downloaded onto a single spreadsheet.
These show negative and positive values. As I only want to work on the negative figs at the moment, how do I highlight the colour of the positive value cells or font to prevent any mistakes ?
