Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:

I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.

I would like to see that I am continually saving on a per-day basis (as well as overtime). I allowance myself an allowance each day, but some days, I need to spend more money than that. The best solution I have to is keep a running total for myself, so that each day is affected by the preceding days. Therefore, if I spend too much, I now have a small defecit that needs to be corrected. This method keep me on track as far as saving and spending.

Question (and I copied the actual data from my spreadsheet):

Without having to manual enter the final calculations (because this is just a simple part of an overall larger, more complex spreadsheet), can I generate the values in my Value Change row, based on the information from my Running Total row?

For example, Day 1 to Day 2, I was able to incease my running total from 233 to 354 (meaning that I had saved +121 that day). Of course, this is an easy subtraction problem (Day 2 - Day 1 = Value Change). From Day 2 to Day 3, I spent way too much. The running total fell to -1198, meaning that I spent 1552 too much (that day's value change is -1552). Again, this an easy subtraction (Day 3 - Day 2 = Value Change, just like the first example). From Day 3 to Day 4, I was able to reduce my running total -1063, meaning that I was able to save 135 that day. This is my problem. Day 4 - Day 3 does not equal the value change of + 135. To get this value, the preceding formula now has to change to ABS(Day 3) - ABS(Day 4).

This is the issue. I need a formula that can work normally when the numbers are postive or when the second value is larger (in terms of absolute value). On the other hand, it needs to recognize the special cases like Day 3 - Day 4. Is this some form of a conditional function?

Running Total 233354-1198-1063-878-658-933-807-657 Percentage Change51.93%-438.42%11.27%17.40%25.06%-41.79%13.50%18.59% Value Change121-1552135185220-275126150

I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.

I want to find the min and max numbers within a thread of numbers that has both positive and negative values. The key is that I want the smallest amount or the largest amount based on the number and not on the positive or negative.

For example, below is my list of numbers.

7 5 2 -5 -6 7 -8 -3

I want the min formula to return 2 and the max formula to return 8.

************************************************************************>Microsoft Excel - Book2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29=ABCD1 amount Abs amtMark x when paried up 2 (43,746.73)43746.73x 3 43,746.73 43746.73x 4 43,746.73 43746.73 5 (60,579.30)60579.3 6 (60,579.30)60579.3x 7 60,579.30 60579.3x 8 (98,416.85)98416.85x 9 98,416.85 98416.85x 10 98,416.85 98416.85 11 (500,000.00)500000 12 (500,000.00)500000 13 (500,000.00)500000 14 (500,000.00)500000x 15 500,000.00 500000x 16 (700,000.00)700000 17 (700,000.00)700000 18 (700,000.00)700000x 19 (700,000.00)700000x 20 (700,000.00)700000x 21 (700,000.00)700000x 22 (700,000.00)700000x 23 (700,000.00)700000x 24 700,000.00 700000x 25 700,000.00 700000x 26 700,000.00 700000x 27 700,000.00 700000x 28 700,000.00 700000x 29 700,000.00 700000x Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,

I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week

I have created a Pivot table from a source data file that includes a document status column ('Type I Or C') (I for Invoice & C for Credit) and an Invoice / Credit value column (Invoiced Price). However the values for both invoices and credits are positive so when summed distort the total values.

I am attempting to create an additional column within the Pivot table to convert the credit note values to negative by inserting a calculated field under the formula tab, i.e.

=IF('Type I Or C'="C",-'Invoiced Price','Invoiced Price')

The above formula works fine in a standard worksheet but it is not reckonsing the "C" within the pivot table. If I manually change the value to numeric (i.e. 1 for Invoices and 2 for credits) it works fine, i.e =IF('Type I Or C'="2",-'Invoiced Price','Invoiced Price')

I have one debit and one credit column. I want to higlight duplicates, with positive and negative values.

Like this.

Column A 5000 1000 10000 3000

Column B - 10000 -5000 -3000 -2000

I know how to do the conditional formating to find duplicates when there is only positive or negative numbers, but i don't know how to match both positive and negative numbers.

In Tab 1, I have a negative number and the word "Original" next to it. In Tab 2, I have a mix of positive & negative numbers. I want all numbers that are negative to display the word "original" and all positive to display" new." How do I do that? Also, I want the opposite to work as well-- if Tab 1 has a positive number, I want all positive numbers in Tab 2 to display "original."

I have the following formula =IF(VLOOKUP(F89,'2013 susp 2714035 Reissues'!F:F,1,FALSE)=F89,"yes",FALSE)

That is supposed to look at the tab 2714035 Reissues and find the same dollar amount. The issue Iam having is the dollar amount can be a negative or a positive amount but the formula is only picking up the number if it matches exactly negative to negative or positive to positive. formula to pick up the matching number if its a negative or a positive.

I have a column which is populated with profits and losses from a trading account. Here is an example:

Column I 400 200 -100 -150 -50

What I want to do is average all the profits, and average all the losses so I have two numbers - the average winner and the average loser. Continuing with the example from the 5 trades above, the average winner is 300 and the average loser is -100. How can I do this in excel?

It's a worksheet for testing milk tanks. The issue is as follows:

Column F = Chart Error/This can be either a positive or negative whole number Column G = Tolerance/This is always a whole positive number

Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.

Examples:

Column F= -20 Column G= 15 Column H= Fails

or

F= 20 G= 15 H= Fails

The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.

I am trying to create a budget in excel and want to type my numbers (in certain cells only) without a - sign but I want them to appear, and calculate, as negative numbers. Basically, I am lazy and don't want to have to remember to use a - for all of my expenses when I am inputting the data.

Have the following numeric values: -3.46 103 0 6.2 I would like to convert (not format) them to the following 14-byte text values: -0000000000346 +0000000010300 +0000000000000 +0000000000620

Ive attached a spreadsheet showing what im trying to achieve. basically i have a scheduling objective, in which only a few slots (AA, BB, CC) are available. so the starting availability is fixed. for this example assume the starting values are 6,7, and 8 respectively. as 'bookings' are entered, im using the value of -1 against A, B, or C respectively, to indicate that AA, BB, or CC should be decreased by 1 unit of availability.

im trying to incorporate the subtraction within a pivot table. as you can see i am way off. the hypothetical formula logic that im trying to implement within the PivotTable would look something like this:

for A,B or C, sum all (-1) values for each instance of Date and Stage... this will give total bookings

add this total value to the starting values of AA, BB, CC respectively to get the new availability

Please find the attached MS Excel 2010 file <average set.xlsx>.

There is set of positive set & negative set of values available in the Column A. The values are plotted against Column A in Column B. Light green are positive sets and light yellow are negative sets.

Now I want to calculate the average for the positive set & negative set of values as shown in light majenta in the cells F4:F9. Also all majenta cells to be plotted by formula.

The Column H and Column I also same as like above , but here negative set of numbers starts first.

In my first column I will be entering both negative and positive numbers. In the cell next to it I need the amounts to all show as positive only. So both negative numbers and positive in the first column will all show as positive in the adjacent column/cell.

I use currency data pasted from legacy program that pastes dollar values followed by a C or D to represent debit and credits, ie -- 1,000,000.00C or 1,000,000.00D.

Is there some way to remove the letter and correctly format the value to a negative or positive number on a whole worksheet or column?

Currently I am doing this manually one cell at a time.

I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?

Im working on a time schedule form for my work. It all works good but it have one little error.

Lets say it looks like this cell a1 has start time 22:00 and a2 has a end time 07:00. i know that i can switch the cells in the formula =sum((a1-a2)*24). like this i´ll get a negativ answer and that f.cks up the totalt becuse of the negativ answer i get.

is there a way to get 7:00 - 22:00 and 22:00 - 7:00 to calculate as positiv with one formula?

I have a spreadsheet of invoices and credits memos (500+ rows). Is there a way to match the positive and negatives that match? For example if there is -40.39 in one cell and positive 40.39 in another that it could highlight both those cells. I was thinking to do it in conditional formatting however I can not get it to work. It does not have to be fancy I just need to highlight them because there will not be a lot that do actually match.

Is there a simple way to convert a positive number to a negative number ?

Fromto 10(10.00) 56(56.00) 116(116.00)

Additionally, would the same procedure work for time? So if I had a column listing hours that looks like this:

10:05:00 4:34:00 2:18:06

is there a way to convert this to negative hours? Understandably, there are no such thing as negative hours, but I am trying to illustrate a situation where an internal procedure was completed x amount of hours before the specified start time.