I have a column which is populated with profits and losses from a trading account. Here is an example:
Column I 400 200 -100 -150 -50
What I want to do is average all the profits, and average all the losses so I have two numbers - the average winner and the average loser. Continuing with the example from the 5 trades above, the average winner is 300 and the average loser is -100. How can I do this in excel?
I would like to see that I am continually saving on a per-day basis (as well as overtime). I allowance myself an allowance each day, but some days, I need to spend more money than that. The best solution I have to is keep a running total for myself, so that each day is affected by the preceding days. Therefore, if I spend too much, I now have a small defecit that needs to be corrected. This method keep me on track as far as saving and spending.
Question (and I copied the actual data from my spreadsheet):
Without having to manual enter the final calculations (because this is just a simple part of an overall larger, more complex spreadsheet), can I generate the values in my Value Change row, based on the information from my Running Total row?
For example, Day 1 to Day 2, I was able to incease my running total from 233 to 354 (meaning that I had saved +121 that day). Of course, this is an easy subtraction problem (Day 2 - Day 1 = Value Change). From Day 2 to Day 3, I spent way too much. The running total fell to -1198, meaning that I spent 1552 too much (that day's value change is -1552). Again, this an easy subtraction (Day 3 - Day 2 = Value Change, just like the first example). From Day 3 to Day 4, I was able to reduce my running total -1063, meaning that I was able to save 135 that day. This is my problem. Day 4 - Day 3 does not equal the value change of + 135. To get this value, the preceding formula now has to change to ABS(Day 3) - ABS(Day 4).
This is the issue. I need a formula that can work normally when the numbers are postive or when the second value is larger (in terms of absolute value). On the other hand, it needs to recognize the special cases like Day 3 - Day 4. Is this some form of a conditional function?
Running Total 233354-1198-1063-878-658-933-807-657 Percentage Change51.93%-438.42%11.27%17.40%25.06%-41.79%13.50%18.59% Value Change121-1552135185220-275126150
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
I want to find the min and max numbers within a thread of numbers that has both positive and negative values. The key is that I want the smallest amount or the largest amount based on the number and not on the positive or negative.
For example, below is my list of numbers.
7 5 2 -5 -6 7 -8 -3
I want the min formula to return 2 and the max formula to return 8.
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,
I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week
I have created a Pivot table from a source data file that includes a document status column ('Type I Or C') (I for Invoice & C for Credit) and an Invoice / Credit value column (Invoiced Price). However the values for both invoices and credits are positive so when summed distort the total values.
I am attempting to create an additional column within the Pivot table to convert the credit note values to negative by inserting a calculated field under the formula tab, i.e.
=IF('Type I Or C'="C",-'Invoiced Price','Invoiced Price')
The above formula works fine in a standard worksheet but it is not reckonsing the "C" within the pivot table. If I manually change the value to numeric (i.e. 1 for Invoices and 2 for credits) it works fine, i.e =IF('Type I Or C'="2",-'Invoiced Price','Invoiced Price')
In Tab 1, I have a negative number and the word "Original" next to it. In Tab 2, I have a mix of positive & negative numbers. I want all numbers that are negative to display the word "original" and all positive to display" new." How do I do that? Also, I want the opposite to work as well-- if Tab 1 has a positive number, I want all positive numbers in Tab 2 to display "original."
I have the following formula =IF(VLOOKUP(F89,'2013 susp 2714035 Reissues'!F:F,1,FALSE)=F89,"yes",FALSE)
That is supposed to look at the tab 2714035 Reissues and find the same dollar amount. The issue Iam having is the dollar amount can be a negative or a positive amount but the formula is only picking up the number if it matches exactly negative to negative or positive to positive. formula to pick up the matching number if its a negative or a positive.
It's a worksheet for testing milk tanks. The issue is as follows:
Column F = Chart Error/This can be either a positive or negative whole number Column G = Tolerance/This is always a whole positive number
Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.
Column F= -20 Column G= 15 Column H= Fails
F= 20 G= 15 H= Fails
The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.
I am trying to create a budget in excel and want to type my numbers (in certain cells only) without a - sign but I want them to appear, and calculate, as negative numbers. Basically, I am lazy and don't want to have to remember to use a - for all of my expenses when I am inputting the data.
In my first column I will be entering both negative and positive numbers. In the cell next to it I need the amounts to all show as positive only. So both negative numbers and positive in the first column will all show as positive in the adjacent column/cell.
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
I have a spreadsheet of invoices and credits memos (500+ rows). Is there a way to match the positive and negatives that match? For example if there is -40.39 in one cell and positive 40.39 in another that it could highlight both those cells. I was thinking to do it in conditional formatting however I can not get it to work. It does not have to be fancy I just need to highlight them because there will not be a lot that do actually match.
Is there a simple way to convert a positive number to a negative number ?
Fromto 10(10.00) 56(56.00) 116(116.00)
Additionally, would the same procedure work for time? So if I had a column listing hours that looks like this:
10:05:00 4:34:00 2:18:06
is there a way to convert this to negative hours? Understandably, there are no such thing as negative hours, but I am trying to illustrate a situation where an internal procedure was completed x amount of hours before the specified start time.
My form has a combobox with three options "Withdrawal" "Deposit" "Fee". I want to make sure that whatever number a user puts into a textbox, if they select "Withdrawal" or "Fee" that number will be converted to a negative number, and if they select "Deposit" it will be positive. I have written the following code and am just wondering if there is some super slick way of doing it other than an if statement.
I have a forecast for a week, all days I type in, the real order, in the end of the week I got a difference between the forecast and the real orders. the difference can be positive or negative, in any case I want that difference to be added on the next cell on next week, plus the difference between the forecast and the real order from the day before, and so on.
I'm using this formula "E4*($L$3+1+IF(K4,ABS(K3/K4-1),0))" but if the real order is less than the forecast the formula add the difference increasing in a positive way, when what I want is decrease the value if the difference shows a negative tendency.