How can I let the Sub carry on to next instruction if Macro1 fails?
Private Sub Workbook_Open()
Call Macro1
' If Macro1 Fails go to next macro
Call Macro2
'If Macro2 Fails go to next macro
Call Macro3
'If Macro2 Fails go to next macro
Call Macro4
End Sub
I'm use to highlighting two cells, find the plus, and copying a list of numbers down about 10 rows. Is there a macro instruction or VB instruction that will do the same?
Example,
Before:
G1010
G1011
After:
G1010
G1011
G1012
G1013
G1014
G1015
G1016
G1017
G1018
G1019
G1010
G1011
I have a workbook with 23 pages, each running a macro to calculate the final "answer".
I would like to make the title page comman button create a dialog box, listing the 23 pages/macros with a check-box for each (default is "checked") asking the user which macros / calculations to execute. Any ideas how to do this?
I am trying to avoid making this a sheet in my workbook.
I have a macro which is shown below.
Range("E1").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet1").Select
Range("A3").Select
ActiveSheet.Paste
Sheets("Sheet2").Select
Range("I1").Select
Application.CutCopyMode = False
Selection.Copy
What im trying to do is to be able to run the same macro but start on the last cell that I had selected and work on down the sheet until the end. What im also trying to do is to be able to post into next avail line on sheet 1 so it dosent overwrite.
I am attempting to create a macro that will carry out vlookup for each row in a data set
For simplicity testing this on a sheet where A1:A10 contains data 1 to 10, and B1:B10 contains a to j, and putting the result of the vlookup into column E.
The code I have written is:
[Code] .......
When I attempt to run this I receive an error message that says, "Unable to get the VLookup property of the WorksheetFunction class."
What do I need to change?
i am working with a large data set of excel files . I need to format the sheets in a specified way . i have recorded a marco that does this . I now have the problem of creating an automatic loader that opens the files , carrys out my macro , then closes the files.
For example i have a folder X that has 10 files inside it. i would like to be able to load the first file , carry out the macro, close the file move it folder y . Then look back into Folder X , take the first file it see's , carry out the macro , close the file , move it folder y , the go back to folder x and carrying out this until all the files are done and stopping when the folder is empty
I'm working with a worksheet which includes a multiple If tree like this:
=SI(M9=1;'Pre diseno'!$N$60;SI(M9=2;'Pre diseno'!$N$61;SI(M9=3;'Pre diseno'!$N$62;SI(M9=4;'Pre diseno'!$N$63;SI(M9=5;'Pre diseno'!$N$64;SI(M9=6;'Pre diseno'!$N$65;SI(M9=7;'Pre diseno'!$N$66;SI(M9=8;'Pre diseno'!$N$67;'Pre diseno'!$N$68))))))))
(it's in spanish)
But i have a problem with it. I'm trying to enlarge the formula up to ...M9=19...)))))), but excel gives me an error in the formula. What's wrong? Is there a limit for the number of IF's ? what would you do?
if i run my macro that saves a sheet as a certain name and then prints it, it works, but if i run my macro and the file already exists it asks me to overwrite it. If i select yes it prints it and carrys on with the rest of the macro, (good). If i select no the macro fails. How can i get it so if i hit no, it runs the rest of the macro after the print command?
View 2 Replies View RelatedI have a macro that sends a sheet via email when the engineer has completed it and clicks a button. I added a filter to some of the results to remove blank lines and now the macro will not work. The problem is that if I remove the filter so that the macro does work, I end up with blank lines again.
View 4 Replies View RelatedI have a workbook which I need to give shared access.
The workbook has macros which make sheets visible and VeryHidden and also give certain sheets protection. Also a filter runs on one sheet.
When I give the workbook shared access, the macros error?
how I can give me workbook shared access but still allow the macros to hide/unhide sheets, filter and protect worksheets?
I have a workbook with macros that run on my laptop, but when I email the workbook to another user and the macro is executed I get a subscript out of range message?
Both Excel versions are the same.
Environments are the same.?
I have used the following piece of code to stop error checking in my excel spreadsheet:
Option Explicit
Private Sub Workbook_Open()
' Application.ErrorCheckingOptions.BackgroundChecking = False
End Sub
The problem is - works fine on my computer, but when distributed on the server the folloeing error is returned:
Run-time error '438':
Object doesn 't support this property or method
I have a protected worksheet containing an SQL query. I have two cells on the worksheet unlocked so that users can enter fresh parameters to feed the query.
Because I have to use MS Query to interrogate our SQL server (current IT decree), the query won't support parameters directly when the query cannot be represented graphically - so I have to manually edit the sql command text and then refresh the query - or at least that was why I wrote the code below
The problem: My macro won't unprotect the sheet before it calls the SQL.it therefore won't update the sheet to detail the DSN, command text and number of parameters (latter should be 0) - info just used to verify queryit won't run the query / return the data as the sheet is still protected Comment: I have had to remove sheet protection in order to allow the sql to execute and return data. If protection is removed, the query does execute and return data ( changes in the "parameter" cell contents do cause the query to be correctly modified)
I could comment out the debug info but the query still doesn't return data if the sheet is protected.
Activesheet And worksheets(ndx) where ndx has been defined As ActiveSheet.Name
I apologise If my post Is difficult To follow - especially the code.
Sub AgedStockParameters()
nmb = ActiveWorkbook.Name
ndx = ActiveSheet.Name
Workbooks(nmb).Activate
Worksheets(ndx).Activate
ActiveSheet.Range("A1").Select
WkshtQryCon = Workbooks(nmb).Worksheets(ndx).QueryTables(1).Connection
ActiveCell.Value = WkshtQryCon
Range("A2").Select
WkshtQryFld = Workbooks(nmb).Worksheets(ndx).QueryTables(1).CommandText
ActiveCell.Value = WkshtQryFld.......................
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works)
2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works)
3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application
.EnableEvents = False
.ScreenUpdating = False
End With
Run "PullInSheet1"
Dim oldbook As String
[Code] .......
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code:
Sub PullInSheet1()
Dim AreaAddress As String
'''''' Sheet11.UsedRange.Clear
Dim ClRange As String
ClRange = "= 'L:ADMINEMPLOY SERVICES" _
[Code] ........
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
I am using Microsoft Excel 2003. My question is about calculating time. 1 hour + 1 hour and fifteen minutes would equal two hours and fifteen minutes. Using Microsoft Excel 2003, let's say I am using cells A1, A2, A3 and A4.
A1 will be 1:00 for 1 hour
A2 will be 1:15 for 1 hour and fifteen minutes
A3 will be my total for adding cells A1 and A2 and the answer will be 2:15 for two hours and fifteen minutes.
My specific questions is: Would it be possible for me to have the fifteen minutes (0:15) from the two hours and fifteen minutes (2:15) automatically carry over to cell A4 or cell A4 of another worksheet without having to type in 0:15 or having 2:15 appearing in cell A4?
I have 2 subs routines in a mod. I have declared the two variables at the top of the sub. However when I call the second sub the variable's are not passed along.
Here is an example script. All in one mod. I have taken out the junk in between to help edit the problem.
I'm looking to pass the same bnumber and dnumber to the secound sub.
below fig 1 is a part of a worksheet we are using for Stock. The idea is to track stock write downs on a yearly basis. Where I am struggling is a formula to carry the stock balance and value forward if there has been no movement in a given year.
The enteries in green (fig1) colums "Stk Forw" & "Car Fwr" represent how I would like the info to look.
Is there a formula that could look for the last entry in "Stk In/Out" if the column "YTD to date" is empty and carry that value forward to the next row.
I Would also need a formula to sum the Total & Car Fwr colums as one total.
Fig 2 Shows the formula I am currenlty using.
I created a time sheet for employees which calculates the total wages each week. I copy the worksheet to create a new time sheet for each week. I want all subsequent time sheets (worksheets) after the first one to calculate the total wages to date by adding the total wages of the current sheet to the total on the previous sheet. If for example I am on Week 2, I know how to reference the wages cell from the previous week by using something like ='Week (1)'!M28, but when I copy the Week 2 sheet to create Week 3, the new sheet still references Week 1. I don't want to manually change the sheet number each week. How can I make it reference the previous week automatically?
View 9 Replies View RelatedAttached is a sample of excel file,
its a simple spreadsheet that suppose to track a usage of items that were taken out of inventory,
but at the same it needs to be printer friendly (that's what's causing all the problems),
it got messy when I had to carry over from previous row,
I had to manually enter under "Quantity ch." in order to have correct amount under "Left" column, (see row #4)
I think I can eliminate whole "Carried over" column if I create a formula that will enter data into B4 only if J3 has a number, I also need to copy the same formula's down each column,
I want to input pick 3 (3 numbers) into a cell and with the assigned SUM to that cell to add +123 to the 3 numbers I input, but how do I get the answer not to carry over?
For pick 3 games, the numbers are; 0,1,2,3,4,5,6,7,8,9 (ten total).
When I add +123 to 987 I get 1110. I don't want that. I would like it to show 010 instead, lotto numbers no carry over.
I'm looking for some ideas on how I can improve my invoice I have on excel,currently I have a spread sheet made to look like a standard invoice that prints on one page.
the problem is the more lines the invoice has the smaller the righting gets as it only prints one page.
how can I get my invoice to look nice, still automatically add up all the lines but go into two pages?
I've tried splitting the invoice but it looks professional.
I have some values in 1st sheet and 2nd sheet and I needed to carry the values to another worksheet making a list
Like this:
In 1st worksheet I have
A B
a 353125
b 643643
c 532
In 2st worksheet I have
A B
x 754
y 64363
z 23626
I want in the 3rd worksheet to return all values of the other worksheets
Like this:
A B
a 353125
b 643643
c 532
x 754
y 64363
z 23626
how do I do this?
I have a sheet which is just a list of product codes and a sum of every order placed for each code. i.e.
Sheet2 AB1Prod codeOrdered2123100345650478960
then I have another sheet which is the orders placed by our customers. These orders are to go out in 6 periods each of 2 weeks.
For various reasons the amount ordered each time won't match the periods.
The sheet beforehand will look like
Sheet1 ABCDEFGHIJKLM1Prod codeP1 REQALLOCP2 REQALLOCP3 REQALLOCP4 REQALLOCP5 REQALLOCP6 REQALLOC212327 20 35 20 12 11 345633 40 50 15 25 11 478915 20 20 20 20 10
What I need to do is look up the quantity ordered and then allocate the ordered quantity to the periods carrying over the remainder to the next period and so with the table above the result would be
Sheet1 ABCDEFGHIJKLM1Prod codeP1 REQALLOCP2 REQALLOCP3 REQALLOCP4 REQALLOCP5 REQALLOCP6 REQALLOC2123272720203535201812 11 34563333401750 15 25 11 478915152020202020520 10
Both sheets are sorted by the product code ascending and it doesn't matter if it is a formula or VBA based solution as I am already using both.
The number of product codes is currently just over 400 but will grow to about 550 by the end of period 6.
I want to make a template in excel. Lets assume I have Opening Balance in A1 and closing balance in B1. How do I make template make new sheet and every time I make new sheets it should take the closing balance of the previous sheet as the opening balance and so on and so forth. But the very first sheet needs to have the opening balance as unlocked cell but the rest of them needs to be locked.
View 7 Replies View RelatedI have a program in Excel with VBA code. The VBA code is all under password protection.
Is it possible for Excel to carry a virus or worm or whatever to another user?
If it can, how does a virus get into the Workbook?
If it can, how do I protect the program from carrying a virus?
Conditional formatting format: Boarder - bottom boarder
The problem when I insert a raw in the middle of the table the condition formatting is not applied. How can I make excel carry over the conditional formatting?
The only reason I formatted the data in a table because it'll automatically control alternating row background color when insert rows.
I have recently obtained some help on code to bring up a user form based on cell change selection.
the code is as follows:
Dim c As Range
If Not Intersect(Target, Range("C6")) Is Nothing Then
With Sheets("Data Set").Range("D4:D43")
Set c = .Find(Range("C6").Value, LookIn:=xlValues)
If Not c Is Nothing Then
UserForm4.Show
End If
End With
End If
It brings up userform4, but the command buttons do not carry out the code behind them:
Private Sub CommandButton2_Click()
Sheets("Data Entry Form").Range("$C$6") = "Choose Employee"
Unload Me
End Sub
If I run user form seperate from the sheet and bring it up only in visual basic, it works...Any ideas???
PS this command button is no so it resets field C6. The other button is yes and performs copy paste function. Neither are operational when user form is brought up through the sheet change. Only works when initialized in VB.
I have a userform that contains a number of controls. When I press the enter / return key, I would like this to have the same effect as hitting the 'OK' button i.e. run some code. At the moment, hitting enter sets the focus on the next control in the tab order.
View 5 Replies View RelatedExcel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").
I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.
Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.
