Cell D10 to be a formula that; Looks at Cells E13:E38 and if in this range the text "Sick" appears looks at the adjacent cell H13:H38 (which has a numeric value). It will then take that value and subtract it from D8.
I will have to do this for 2 other text strings as well, Vacation and Holiday.
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
I need a formula to do the following
Subtract I62 from I62 only if F62 contains P/UT and put answer of subtraction in L62.
Cells are in Time format
Firstly i am running Excel 2003 (at work)
Now my problem is that i have been asked to make a spreadsheet about Printer and Fax Cartridges (Zzzzz) but i do not know how to do the sum.
this is how my Spreadsheet looks like this (cartidge amount etc all on top line of spreadsheet)
(Hp45 etc all down left hand side) ...
Seems that when I subtract a future date from NOW() and format the cell d:hh:mm that the result is 1 day off. So if I subtract NOW() (today is 10/24) from 10/25/08 it returns a 1 for the d when I would expect it to be zero.
View 14 Replies View RelatedI have 2 cells in a row that are times, it has been a while since I did any work in excel. I want to take the first cell as start Time, the second cell is end time and I need to subtract them and put the total in a cell called Hours. What is the correct format to use and how would I do the subtraction.
Generally start time will be AM and End Time will be PM.
How do I add and subtract hours minutes and seconds?
I’m writing a program to find when the sun is directly overhead. I’m doing this so that I can find the true north/south line. In the example on my program, at the town of Farmington, a plumb bob will cast a shadow on the north/south line at 11:51:39 on June 16
CELL A1=45
I want CELL A2 to be a blank cell which people can enter a number in that will decrease the value of A1 and once that value is entered, it would return to a blank cell. CELL A3 would be used in the same fashion except to increase the value of A1
what would a formula for this look like?
im trying to subtract from two cells. see below
i have two cells, lets say A1 which has number 10 in it, and cell B1 which has -1 in it, but when i use this formula in cell C3 =sum(A1 - B1) It add it on when there's a minus sign in front of the number is there a way around this?
Im working on a time schedule form for my work. It all works good but it have one little error.
Lets say it looks like this
cell a1 has start time 22:00 and a2 has a end time 07:00. i know that i can switch the cells in the formula =sum((a1-a2)*24). like this i´ll get a negativ answer and that f.cks up the totalt becuse of the negativ answer i get.
is there a way to get 7:00 - 22:00 and 22:00 - 7:00 to calculate as positiv with one formula?
I have a column with start date and another next to it with end date. I now want a third column that gives the number of days alloted. I tried
=G6-F6 and that didn't work. What should I do?
I need to be able to determine a departure time based on: Appointment - Transit time - 1 hour buffer......Clear as mud?
I tried using =SUM(M2-N2)-1, but being a noob, it's not working and I am lost, yes I admit it, I'm lost...
I do have all the cells format set [h]:mm
I want to return the previous month in long text format and then use it as part of a file name. when i run the below the subtraction takes one day away from the current date and the msgbox displays "January". I want to return "March"
Sub test
Dim MyMonth
Dim TradesMonth
MyMonth = Month(Date) - 1
TradesMonth = Format(MyMonth, "mmmm")
msgbox TradesMonth
End Sub
I have 3 columns. A B and C. In column C I want to input the answer to a formula into each cell using data from cells in their respective rows,
For. e.g.
Cx= Ax- (Bx X 0.8).
I want to be able to input this formula somewhere that will automatically fill out the cells in column C.
Column C is 20 cells long so x would range from 1 to 20.
I have travel data for hundreds of cars. Col A has the car ID number. Col B has the date. Col C has the distance of a journey. Column D, has the total distance traveled on a given date for a given car.
In Column E, I'm trying to calculate the remaining distance to travel "prior" to the journey being made.
I a have attached an example. [URL] ....
So in column E, prior to the first journey (9km) being made there is 19 km still to travel in the data. And for the second journey the is 10 km left to travel.
I'm working on a budget and financial calculator
I've already got it set up to calculate my pay and deduct taxes and all my bill and tell me how much I have left at the end of the month, now I am trying to get it set up to tell me how much will be left out of each check I get based on what day my bills are due.
Essentially what i want is I7 is the cell for my first check of the month and K7 is my second check, Column H shows my due dates for each bill, column A is the price on each bill so what i want is something that is similar to.
If the value if column H is between 5 and 19 then deduct the price in column a from I7 (with H and A being the same row) and if the value of column H is 1-4 or 20-31 then deduce the value in column A (with H and A being the same row) from K7.
Another way to put it would be I7 gets deducted the value in column A if column H is between 4-19 otherwise do nothing (with H and A having same row) deduct the value in Column A from K7 if column H is between 1-4 or 20-31 otherwise do nothing.
In cell A1 i have a total amount, lets say it's 20, in B1 i have a value of 5, in C1 i have 10.
Looking to see if it's possible to take the 5 from cell B1 to make A1 = 15, then 10 from cell C1 to make it 5 in A1 whilst reducing both columns B and C to zero If B1 or C1 are greater than the value in A1, A1 displays that amount that would be left
only thing i can think of is a hidden column to calculate whilst incorporating an if statement into B & C?
for example:
Period Revenue 5% 10% 15% 20% -5% -10% -15% -20%
$72,003.33 $75,603.50 $79,203.67 $82,803.83 $86,404.00 $68,403.17
I am looking to be able to compare a number with a letter so for example 4c and compare it with another 5c and in that scenario see a difference of 1 but when the two to be compared are 4c and 4a it would see 0.6.
in this excersize
A=0.33333R
B=0.33333R
C=0.33333R
it is basically sub category of the initial number so an A is better than a B and in tern a B is better than a C
for example
Targeted Working At Residual
4c 4b 0.33333r
5a 4c -0.33333r
4c 5c 1
4c 5a 0.33333r
5c 3b -1.66666
so on and such forth the number and letter can be entered into seperate fields the lettering are only A,B,C but numbers can range from 1-9 i am normally quite ept with excel but this is out of my depth
I have a cell that is "Start Time." Another is "End Time." And, of course, "Total."
The sum listed in "Total" is multiplied by a cost per hour. Except it does not work. I have attached an example copied directly from the cost sheet.
I have a cell that has data formatted in this style:
0:00:08:412
h:mm:ss:ms
I was wondering how I might go about writing a formula that would subtract say 2 seconds, or 400ms from that value.
I needa formular that will subtract a number per day, for example as one day passes you can set the amount of number to be taken away from the total.
View 12 Replies View RelatedIf I have a date format 7/1/13 that shows as Jul 13, how can I subtract 1 year from this in the next cell?
View 3 Replies View RelatedI have been trying for hours now to write a macro that would do the following:
I have a worksheet that looks like this:
15:10:06.3671B56221
15:10:07.1770B56221
15:10:09.3021B56221
15:10:10.1320B56221
15:10:11.3811B56221
15:10:12.1810B56221
15:10:14.6421B56221
15:10:14.6420B56221
15:10:16.2721B56221
15:10:17.5220B56221
with many more rows
I would like to subtract (for column A) line 1 from line 2, then line 2 from line 3....etc the data in column A represents time I would like to have the result in milliseconds and in a new column (D for example)
I'm trying to subtract the same exact cells (position of the sheets) but from different workbooks. Here is my code that is definitely not working...
[Code] ....
I'm trying to subtract the value of a textbox in a userform from a value in a cell, and display this new value in another textbox. An added complexity is this takes place in Visio but communicates to excel to find certain values. I have the following code:
[Code]......
which displays the value of a cell in excel, in a textbox in a visio userform. The excel cell value then changes and I thought that it would work if I were to duplicate this code and run a new sub changing the last line to:
[Code] ....
But I get a type mismatch error on the line.
Working with external documents such as MS word is not my specialty and I have a feeling that what I need has been done before.
1) Takes a word file (open)
2) Split all words and put these in an array
I think a space character can be used as a delimiter, but all characters like ;,:" etc need to be trimmed so only "real words" remain.
I have a table that I am storing into an array. I have an array FDate where I store a date and another array FTime where I store times.
FDate is formatted as m/dd/yyyy Hh:Mm: Ss
Ftime is formatted as Hh:Mm:Ss
I know in excel that you can add and subtract dates and times. How do you accomplish the same task in VBA?
I am currently having a problem with an IF statement. Currently this is my formula,
Code:
=IF(CZ2="TEST1",'DATA'!B241,IF(CZ2="TEST2",'DATA'!B243,IF(CZ2="TEST1(NEW)",'DATA'!B241,IF(CZ2="TEST2(NEW)",'DATA'!B243))))-DATASUBTRACT!CY19
The IF formula works perfectly fine, but when I attempt to include a subtracting to the back of the formula, I will receive a #VALUE! error.
When I create a similar IF formula in a new workbook, the formula allow me to subtract. I do not know why the code above is unable to subtract.
Is it possible to add to or subtract from the value of a cell with a macro? For example, lets I have a cell that contains the number of nails in a drawer (200) and I needed to remove one. I enter the number 1 in a cell and hit the remove button. The cell that contains the value of total nails would then be one less (ie: 200-1=199).
If I used a user form for something like this what would the vba look like?
Also, I realize that this would probably be easier with Access however, I do not know Access very well at all and the number of items I have to do this with would not warrant a database.