I have a formula in column A of the following sheet. The problem is that when the entry in cell H contains a letter as well as a number then the formula in column a returns 0.
Also if the value for false in the forumula is changed from 0 i.e to 1 or 2, then a value is returned in column A (this is shown in the red highlighted cells).
AssetRegexample.xls
Does anyone have any idea why this is?
In Column A I have the following values below.
Y
Yes
N
No
Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.
Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes
How do I get my excel spreadsheet to keep a count like 1 of 54 from column A (which is only going to put out values of True or False)?
These values are not always going to be in succession. Currently I want to track A2, A7, A11, A21, and A30 and I want the output to state 0 of 5 and count up from there when I change the values to True like 1 of 5, 2 of 5 and so on.
I'd like to find out the formula where numerical valued between 1-2000 equals True and numerical under 0 equals False. Examples are in the attachment.
View 3 Replies View Relatedi am trying to return the numerical characters from a cell so in A1 i have 6-4 3-6 7-5
A2 i would like to return 6
A3 4
A4 3
A5 6
A6 7
A7 5
there are also possibilties that A6 & A7 could b 2 digit numbers such as 10-12 or could be 9-11 or 11-9 etc
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedI am trying to get a function in a sheet where it has two possible truth outcomes and one false outcome. Both statements false statement goes back to
'Production Metrics 2'!E11/12
Here are the two If statements as they appear in the formula bar now. I need to combine them so they both work and don't cancel each out out.
=IF('Production Metrics 2'!E11/12>2500,2500,'Production Metrics 2'!E11/12) If c10+b10>=4500,0,'Production Metrics 2'!E11/12
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
Sheet one will contain the following:
DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
EXAMPLE:
2/23/2008Phill
2/26/2008 Bill
Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.
=COUNTIF(BG_WADDRESS,D2)>1
I guess the answer for this is simple but can't find the answer.
AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""
Excel tables to the web >> Excel Jeanie HTML 4
I am using the following code in my Macro
Application.ScreenUpdating = False (I set it to "True" at the end of the sub)
But I can still see Excel changing tabs etc.
when you type True into a General formatted Excel cell Excel returns TRUE. This value cannot be formatted to a 1 (or a -1) by applying a different format. Thus, does Excel have a boolean data type? Or is it something else like a numeric value that for whatever reason is not receptive to format changes.
View 9 Replies View Relatedcreated my 'IF' function with the 'True/False' statements, but i am wanting to have yes/no instead and i cant figure out how to do it.
View 9 Replies View RelatedI am currently looking at the workings of a spreadsheet designed by someone else.
Within this sheet, a cell has the formula that , once broken down, equates to:
=100*TRUE (Cell returns a value of 100)
And another that equates to :
=100*FALSE (Cell returns a value of 0)
Am I correct in thinking that TRUE always equals 1, and FALSE always equals 0? I think this is right, but just need someone to confirm.
I've done a check box on excel (ActiveX) which then enters True or False when I tick or untick it. Is there any way which you can change the True/False words to something else?
For example, if the box was ticked it would enter "Electric" instead and "N/A" if the box was unticked?
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedI've got a mega excel sheet right now with multiple people making updates to it on a daily basis. As such I am trying to find a way to output various totals in a separate static table which i can grab at any point and be confident numbers are correct.
The problem, firstly I cant figure out how to have multiple true false formulas checking the sheet from 1 cell. i.e "Check column B True/False for RestrauntNameXYZ + Check column E for true/false GroupABC + check column G for true/false Lunch"
and then
Calculate sum of column A for all rows which above combinations of true/false checks spit out.
I have a list where from which a summary is made but i need true / false thru formula once it is confirmed that it is reconciled with main data.
I have attach a sheet and explain what i needed in red highlighted.
Book1.xlsx‎
I have numbers from -50 to 50 going down column C. In column D, I want to enter a formula which will convert each number to a TRUE or FALSE. How do I do that?
I believe 1 = TRUE and everything else = FALSE, but I would like to know how to get that with a formula.
i have this formula and need to change true and false to text for both the expressions
=OR(E23<=DATE(YEAR($L$2),MONTH($L$2)+$J$2,DAY($L$2)),($L$2>E23))
what im trying to do is e23 has a static date (food sell by dates)and if that date gets within 3 month (J2) period of todays date (L2) i want it to say "warning" if e23 is equal to or older than todays date i want it to say out of date.
L2 has =today()
J2 has the number of months in it for the warning
Hi, I am doing a spread sheet for work and just have a little issue. I have two time fields in the spread sheet and if one is less then the other it reads true and turns green but if it’s greater then it reads false and goes red. Is there a way of it to say how much the time is under or over the original instead or just reading true or false?
View 8 Replies View RelatedHi. Is there a way to make OR() return 0 or 1 instead of true and false?
Or to convert true to 1 and false to 0?
I have a master spreadsheet which shows agreeed rentals for vehicles, on the sample this is the "OCS" tab. I receive a spreadsheet which contains the actual rental charged, in my example this is the tab "Invoice" in my example the VRN are in the same order on both sheets, in reality the invoice spreadsheet is not in the same order as my OCS sheet. My task is to match the VRN field in the invoice sheet to the VRN in the OCS sheet, then look at the amounts and if they match then return "true" if they don't return "false
View 2 Replies View RelatedI have an Excel workbook which has 10 rows of numbers with a min of 20 and max of 30. The random number lies in column B and this will be tested to see if it lies between the min and max. I need to loop this 10 time over
I first started out declaring the 3 variables and assigning values to each variable. It works if I assign a value of 22 for Number but I want VBA to see the Number and make a decision (True or False) if that number lies within the range of 20 to 30.
Should I name the Number variable as a variable because its value will change depending on if it matches the conditions? Also would a case be easier? Between.xlsx
If a value in cell A1 on Sheet Report is found in Range B2:B10 on Sheet Hierarchy Then return True Else False
I have the following so far:
[Code] .....
I want Match to be either True or False. Also, is there a way to know the cell the value was found in if True? How do I make this work?
I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:
View 3 Replies View RelatedWrite if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View RelatedI have no idea where to begin on this problem.
Group Name / Data
A / .01
A / .02
A / -.02
B / .05
B /-.01
C /.02
C /-.03
I need one true or false return for each group if the absolute value of the differences in any combination of a group's data is greater than or equal to .05.
Expected Result
Group A False
Group B True
Group C True
I have searched all through the threads but I can't find anything similar to my problem. I am trying to create a checkbox that when the excel file would be saved as a *.csv file, the value for the checkbox would be saved as an boolean value 0/1. I created a macro that would populate the cells with the form control checkbox and linked it to the respective cell, I just need to change the value.
View 9 Replies View Related