I have this text file that gets sent to me, and i want to be able to re-organize the horible set up (see Import tab) into the proper format (see Reorganized tab) using Macros. There are many variables, such as the number of part numbers, the number of problems can all vary. As well as the number of claims. I don't even know where to begin. See attached file as a sample.
View 4 RepliesI have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
View 9 Replies View RelatedI have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
FieldInfo:= _
Array(Array(0, 1), Array(18, 1), Array(35, 1), Array(56, 1), Array(70, 1), Array(88, 1), _
Array(102, 1))
I have a lot of txt. files you would like to imported automatically via VBA code text file is always the same need only certain data in these two rows which is the red just want this data
it is copied from txt. files in Excel so that I had with the click of a button you obtain all the information and through this button you looking for the folder in which the data next would have 2 lines one would be the computer name of one folder and the user can more This would also be the folder in which the data were computer name to the main folder subfolder, users, and wanted to let me read the particulars of which are in the name of the computer and the user. for example. computer name of the user
i have in excel what i need
I recorded the following macro but it only imports files with a specific name. Can someone change the code to allow it open the specific file loaction where I may choose which .txt file I want to import.
View 3 Replies View RelatedI've a large text file which I need to import selected information only.
Below is the sample text file which showing profile for 3 item.
I have imported a tab delimited text file into excel. One of the columns consists of a string of text - a comment section. Within this column, there are periods and for some reason it seems that Excel is treating these periods as row separators. how I can prevent Excel from separating the text into rows?
View 3 Replies View RelatedI have about 100 text files from which I need to import specific sets of numbers into excel. The part in the file looks like this
Mg24(MR)1917.4198.5
Mg25(MR)250.453.6
Mg26(MR)264.464.2
I need to import the numbers in the 1st row but they need to be transposed. and than of cause I need to do that for the other 99 files I have.
I am a noob to VBA, and not much of a programmer either.
I know how to import a simple text file into excel, but this time I have something more complicated.
I am trying to figure out a problem. So far without any results. As an Intern at a company, every week I receive a .txt which I have to import and reformat in Excel. Every week this means several hours of work, so I decided to see if this process could get automated. Or at least partially. I was wondering if any of you could give me a hint how to do this, or where to start. Attached you will find the raw .txt data and the format it should get in Excel.
View 3 Replies View RelatedThe Workbooks.OpenText works for me, but I need to import the text file into one worksheet of an existing workbook. Is there a method to do this?
View 1 Replies View RelatedI am trying to import a range from a txt file that is not opened. It would be in cell AM2 if opened in excel, or it would be the 38th tab of the 2nd row.
I have it working by opening the file copying the cell and pasting into the destination cell. but I have this looped for each text file in a folder. this takes a very long time.
How can this be done faster? I have been trying to figure out how to use For input as ... but haven't been able to grasp how to manipulate the code.
I need 3 columns - Title - HD - Channel. If no value for HD, the field would be blank.
Data looks like this in txt file:
> A&E HD 265
> ABC Family HD 311
> Altitude Sports and Entertainment HD 681
> American Movie Classics (AMC) 254
> Animal Planet HD 282
> BBC America 264
> BET Jazz 330
> BYU TV 374
> Big Ten Network HD 220
> Black Entertainment Television (BET) 329
> Bloomberg Television 353
> Boomerang 298
Needs to look like this in Excel
> Should look like:
> A&E HD 265
> ABC Family HD 311
> Altitude Sports and Entertainment HD 681
> American Movie Classics (AMC) 254
> Animal Planet HD 282
> BBC America 264
I have a large text file, 75mb, that I would like to import into Excel but it goes well beyond the 65536 lines available.
Is there a process to get these files into excel? File splitter?
Can we create a macre that can convert txt file into excel.
View 5 Replies View RelatedI have a software application that imports audio files and writes information about these files to text files. I'm trying to write and Excel/VBA application that will parse and import the data contained in these files. find a sample of one of these files attached. The big hurdle I am facing is I cannot figure out how to parse this file - the delimiter keeps changing as throughout the file (see example below):
otrk ´ptrk ¬
otrk Îptrk Æ
otrk Ôptrk Ì
otrk âptrk Ú
otrk *ptrk "
otrk Øptrk Ð
otrk þptrk ö
otrk ´ptrk ¬
otrk ptrk
otrk Ðptrk È
otrk Þptrk Ö
otrk þptrk ö
otrk ptrk
otrk îptrk æ
otrk ptrk
I found this question from 2004 but it has expired so I could not quote or reply to it. It can be found at Open file search and import text file This was the question:
I'm looking for some code that i can attach to a command bar which allows the user to browse and search for any text file on their C:Drive and then import it. I think i can work out the import using the data import wizard and macro recorder.
Sub DoIt()
Application.Dialogs(xlDialogImportTextFile).Show
End Sub
The original person said they can work out the import using the wizard, but my users are not tech savvy and therefore I was wondering if I could automate the text file showing up in the excel sheet ( named 'Import') after selecting the text file (instead of going to the wizard). I have attached a sample text file for an example (first row being a header)
I'm back to ask the gods how can I import data from a .txt file every 2 minutes without me actually hitting refresh everytime? Is there some code that will import it or that will refresh it every 2 minutes?
View 7 Replies View RelatedI have a text file and need to convert into excel output using macro with a few selection item. Im attached a text file at least u know what how the text file look. In the text file, please ignore the 1st page(introduction page). In page 2 onward, what i want macro to run is to sort the items to excel into each column like 'BOOKINGNO',P.DELIV','CNTRNO','TYPE','INCOMING VSL','VOY','L. PORT'.
View 6 Replies View RelatedI'm trying to automate an Excel macro. I need a way to select the latest .txt file from the Import Data dialog box.
I currently have a "CHDIR" at the beginning of the macro that sets the active directory. When I make the "Import Data" pick I am in the proper place. Now if I can only sort the list of .TXT files by date, select the first file in the list and hit ok to continue I'd be off and running.
I'm trying to import a text file with an Excel 4 macro. I tried the Open.Text function but I cant assign a date (YYYYMMDD) format to the first field.
View 4 Replies View RelatedI have a text file that contains two rows of data for a single record. when I open the file up in excel, it puts each row into column A. What I need to do is put the 2nd row and combine it with the data in the first row so that i can then run the text to columns wizard and put all the data into its own column.
Here is an example of the data:
TEWAC Dresser Rand SAB 21120-14 1350 1687 3300 80 .80 50 4 2.63 EE-7592 1 2250 46 30.5 14 6
10 12 1 4 .229 .102 2 2 .0303175V/1 HL2 .13 .50 .25 1.5 394 3.000
IP23 Andalas SAB 21000-28.5 1500 1875 415 80 .80 50 4 4.22 EE-7777 80/50 Rise 1 2250 43 30.5 28.5 10
2 13 4 8 .258 .102 0 0 3175V 2 .11 .46 .25 1.5 1.500
CACA Intergen CACA 21120-33 1720 2150 6600 70 .80 50 4 4.56 R971055 50C Amb EE-7467 1 46 30.5 33 14
8 14 1 2 .229 .144 2 2 .0303175V/1 HL2 .20 .65 .30 2.0 697 2.150
What it should look like is the following:
TEWAC Dresser Rand SAB 21120-14 1350 1687 3300 80 .80 50 4 2.63 EE-7592 1 2250 46 30.5 14 6 10 12 1 4 .229 .102 2 2 .0303175V/1 HL2 .13 .50 .25 1.5 394 3.000
IP23 Andalas SAB 21000-28.5 1500 1875 415 80 .80 50 4 4.22 EE-7777 80/50 Rise 1 2250 43 30.5 28.5 10 2 13 4 8 .258 .102 0 0 3175V 2 .11 .46 .25 1.5 1.500
CACA Intergen CACA 21120-33 1720 2150 6600 70 .80 50 4 4.56 R971055 50C Amb EE-7467 1 46 30.5 33 14 8 14 1 2 .229 .144 2 2 .0303175V/1 HL2 .20 .65 .30 2.0 697 2.150
leaving me with 3 rows and one column of data.
I have multiple files with about 600 rows in each that I need to process.
Is it possible to write a macro that can import VBA code in a text file then execute it? I need this functionality as I have produced a corporate spreadsheet template that goes out to many people and I will need to be able to update it as requirements change once it has been distributed. So my idea was to build a macro in the template that has the code in it to import the "update code" from a text file that I would send to all the folks that have the template. If the template was centralized, that would save me from this issue but it is however going to be distributed widely.
View 5 Replies View Related I have recorded the following macro to import a text file. code or show a new way of importing the same. Also i can't figure out how to remove the unwanted rows and unwanted headers after importing the text fle.
Sample file is attached below.
[URL] .....
The macro that i have recorded :
[Code] .....
I am writing some code to open up a file and use the text import as the files are data files. i currently have
View 4 Replies View RelatedAttached is a workbook that takes an imported text file, inserts rows with text.
It is SLOW, you can watch each line being inserted with the text, I would think with such a small sample dataset it would be much much quicker.
Information: See attached xls file.
On sheet1 is the imported data, sheet2 is a copy of the imported data so one can copy and paste to sheet1 as needed with out re-importing for test purposes and only for this query. (Sheets2 thru 3 are not used otherwise).
There is a command button on sheet one which will run macro "aaa". If you run this you will see how slow it is and exactly what it is doing.
I am simply looking for a way to speed this up, I have some files that are 10 times the size of the sample data and they take 10 or more minutes to run.
I have a .txt file (comma separated) that updates daily, which I need to import into Excel. The .txt file contains data from many years, but I only need the data from 2012. Is there a way to only import rows where the data in column "yearID" equals 2012? Since this is a daily operation, I'd rather not import all the rows and then sort/delete rows every time.
View 4 Replies View RelatedI've never actually had a reason or need to use macros for data import or manipulation. At the moment I'm trying to work on a modeling problem which will output the data in the form of a large text file. The data is divided up using 1000 energy bins, and 1000 timing bins for each tally (unique set of output data) like in this file [URL].....Unfortunately because of the applications for the data I can't reduce the number of bins, and the software being used for the modeling will not provide a more convenient form for the output file.
How to create a macro that can extract this data from the output file and import it into a designated excel spreadsheet. It would be preferable to import each set of tally data from the initial output file into it's own spreadsheet, but as I said I have no experience using macros and I'm not even sure where to begin in making something that would work. or even a basic source for examples
every day i get a .txt file containing data. i need to copy all the data from this file to excel...
i want a VBA code that will select the .txt file from given location and copy entire details from that file to Excel..
I have an Excel workbook with 2 worksheets in it. One of the worksheets imports a txt file and then the other worksheet displays data that formulas I have written have collected.
I usually import the txt file by running through the many steps with the "import data" option. This is good but I want it to be faster.
I used the macro recorder and ended up with the following code
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;\DesktopImport FolderTest.txt" _
, Destination:= Range("A1"))
.Name = "Test"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False