Import Text File Into File Where Rows Exceed Excel Row Limit
Jun 3, 2009
I have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
I have an Excel file that is 590 MB and Excel is telling me that since there are over 1,048,576 rows in this file (which I understand is the row limit for Excel 2010), it will only open partially, up to that row amount.
Excel suggested I open up the file in Word, but that has been unsuccessful - Word gives me error messages and won't open the file. I've also tried converting the file to .rtf and .odt, but again, that doesn't work.
Is there any way to break this excel file down? I'm assuming that whoever created it could not have made the document more than 1,048,576 rows, if that is Excel's limit, but maybe I am wrong. The document is in date order from 2008 to 2011, but only 2008 will show, and I know the later years exist. It doesn't matter to me which program this file opens with, I just need the data.
I have a text file that contains two rows of data for a single record. when I open the file up in excel, it puts each row into column A. What I need to do is put the 2nd row and combine it with the data in the first row so that i can then run the text to columns wizard and put all the data into its own column.
I have a .txt file (comma separated) that updates daily, which I need to import into Excel. The .txt file contains data from many years, but I only need the data from 2012. Is there a way to only import rows where the data in column "yearID" equals 2012? Since this is a daily operation, I'd rather not import all the rows and then sort/delete rows every time.
I have a several large delimited text files around 800,000+ lines. It cannot all be pasted into excel due to the 65,000 line limit. For my purposes, I only need about 1 in every 1,000 lines from the text file anyways. Is there a way to only bring in the lines I want? Here is the test file layout:.................
I only need the lines that start:
"01","001","------"
I tried running some macros that I found through searching the forums, but I couldn't get any to work.
I have a large text file that is generated daily and want to import into MS Access as the end result.
First I need to reformat into the row format in excel rather than the format it is in. The issue is not all the segments are the same number of lines or they may have mutli message lines. The names with colon : after them I want to be field names in the table which I wish the text file to import into. Please, I am looking for assistance with this.
I have attached sample data of the text dump, and the name of the file is as you see but different date on the end. At the very end of the text file you will see the desired output which I will then import into Access
Also every new message begins with the dotted line and the date and time at the end.
I am using Excel 2010 and I want to import data from a text file, but the problem is that the data is more than 1048576 rows of excel. Is there any solution though codes if one sheet fills up and import remaining data to other sheets ?
I have around 50 text files with similar design per attached file. I need to import the text files with criteria below:-
1. include file name 2. let user choose the folder 3. exclude data from "work in process summary" to "work in process cost totals" 4. only have one title in the excel files which all text files is combined "Item, Line ....." 5. If the text files do not have title like "Item, Line, ..." do not import
Is it possible to have all criteria listed above by running a macro?
I have a folder with multiple text files. I want to import one of these files to a sheet called data in an existing Excel file. The excel file has references to this data sheet on other sheets which I want to keep. I want to save this excel file with the name the text file has and repeat this for all the text files in the folder.
I found a macro a while back which does the job nicely of importing and saving the Excel file, however all the data in the other sheets gets lost once it is saved. How to keep the data?
Code:
Sub tgr() Const txtFldrPath As String = "FOLDER WITH TEXT FILES" 'Change to folder path containing text files Const xlsFldrPath As String = "FOLDER FOR EXCEL FILES" 'Change to folder path excel files will be saved to Dim CurrentFile As String: CurrentFile = Dir(txtFldrPath & "" & "*.txt") Dim strLine() As String Dim LineIndex As Long
After doing some searching I found a macro here which imports multiple text files into one workbook, keeping each text file as a seperate worksheet, each worksheet named the same as the original file name (minus the .txt extension).
However, it adds a blank line between each line of text. So I get this:
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
instead of this:........
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62 Reply from 172.27.133.29: bytes=32 time=62ms TTL=62 Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
This doesn't happen when I use the import wizard, or when I just open the file from the File -> Open menu.
My text files are always the same format (number of lines, etc.), so it's easy to delimit and insert forumlae as needed, but those extra lines are breaking a macro I've previously written to parse the data.
I need to import thousand of txt files into 1 worksheet keeping the file names as data. Each txt file has 2 columns :
1 0.65914 2 0.65945 3 0.86062 ... ... and each txt file represents recordings made at specific time and date (e.g 0158.DSG_RAWD_HMS_21_ 0_ 0__DMY_29_ 2_12_pulses). I would like to have 2 columns: 1) with the time taken from the name of the txt file (e.g. 21:00:00) and 2) the associated recording. Something like this:
and so on for each txt file and all the recordings piling up in 1 spreadsheet. I have tried to run few codes in VBA, but I have no knowledge of it and none of the code worked. I am using Excel 2010.
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
I wrote a Macro that was running up to now searching for information. Now the text file is bigger than the 65536 limit in Excel. How can you import the .txt file over two or more Sheets using a Macro?
Is it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
I have a lot of txt. files you would like to imported automatically via VBA code text file is always the same need only certain data in these two rows which is the red just want this data
it is copied from txt. files in Excel so that I had with the click of a button you obtain all the information and through this button you looking for the folder in which the data next would have 2 lines one would be the computer name of one folder and the user can more This would also be the folder in which the data were computer name to the main folder subfolder, users, and wanted to let me read the particulars of which are in the name of the computer and the user. for example. computer name of the user
I recorded the following macro but it only imports files with a specific name. Can someone change the code to allow it open the specific file loaction where I may choose which .txt file I want to import.
Is it possible to use the import external data function in excel to import only the bottom 1000 rows from a database? Right now I've only been successful at importing all the data but I only want the last x number of rows. The database is currently an excel file.
I'm trying to use the import data to pull from a closed csv file. I see the column select but no place to select which rows. Is this even possible, I only need the first 500 rows of all columns to be placed in a new worksheet.
I have a macro that takes a text file as input and produces an excel file as output. I want a macro to store the name of the text file in a variable (without its file extension).
As I am looping through files in a folder, I would like to determine if the file is a text file.
The problem is that all extensions are variable in a pattern such as .078, .051, etc.
In this instance, the extensions are numeric, but I'm trying to figure out a way to handle that is all encompassing to include *.txt, *.tsv, *.csv, *.prn, etc......
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
I have imported a tab delimited text file into excel. One of the columns consists of a string of text - a comment section. Within this column, there are periods and for some reason it seems that Excel is treating these periods as row separators. how I can prevent Excel from separating the text into rows?
I am a noob to VBA, and not much of a programmer either. I know how to import a simple text file into excel, but this time I have something more complicated.
I am trying to figure out a problem. So far without any results. As an Intern at a company, every week I receive a .txt which I have to import and reformat in Excel. Every week this means several hours of work, so I decided to see if this process could get automated. Or at least partially. I was wondering if any of you could give me a hint how to do this, or where to start. Attached you will find the raw .txt data and the format it should get in Excel.
