On one sheet (Data) I have a list of action items, each with owner; target date; classification and in some cases revised target date. I'm trying to report on these fields and provide a status, by owner and classification, of how many are overdue; due this month; due next month; due beyond 2mths.
Using a SUM array formula on another sheet I can count the number that are overdue based on date; owner; classification; and target date, but can't find a solution if there is a revised target date. Any guidance you can give would be greatly received.
I would like to ask how can I get to work the index match function (if there's any formula other than this current function its fine) if i have a start date and end date as range date then another criteria for name to get my desired result. im having a hard time to explain so i attached a workbook so you can around it.
I found a formula and tweaked it but still cant get to work.
I am trying to create a SUMIFS function to sum estimated hours for specific systems that do not have a Completed date. I do not want to sum remaining hours if it has been completed. i.e.
I'm struggling to come up with a formula that ill give me the following:
I have will have a row of data (cells A4:H4 on the attached example), in the respective cells below each value in row 4 I want formula that will give me a value of 10 if it sees 90% in the cell above reducing to a value of 0 if it sees 80% in the cell above. I think that there should be a relatively straightforward formulae for that, my problem is that I want to add a further criteria that says; if the value in row 4 increases above 90% and reaches 95% then I must return a value that is 10 for 90% but "stretches" to 12 for 95%. Anything below 80% should return a value of 0, and anything over 95% should return a value of 12.
The part in green will count the number of entries for the name Johnson & Freedman LLC perfectly fine. However when i add the last part in red i receive a #Value! error.
Col. W is formatted as General and has a data validation for the user only to choose Pass or Fail.
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant.
I'm trying to create a formula that will lookup multiple criteria within a table, however the problem I am having is that one of the criteria needs to fall within a certain a date range. I've used index & match to look up the dates when they match exactly, but how to return the same value for when they fall within a date.
I have attached the spreadsheet - Date Range.xlsx! The requirement is to get the correct "pay" from the "Contingent Workers" sheet to the Timesheet sheet. So it will match the Employee ID, but also the date on the Timesheet tab will fall between/or be the exact date indicated on the contingent workers tab.
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant. I have attached my sample spreadsheet.
I have a spreadsheet of prices (raw data), and I need to pull out both the most recent price for each item for a specific customer code for each item, as well as the second most recent price, (essentially the old price), for that customer code for each item.
I have columns for ITEM (code), PTC (Customer Code), PRICE, and EFF (Effective Date). For each item code, there are multiple prices for multiple customers, such as in the linked workbook.
I am currently using the formula, =INDEX(PRICE,MATCH(1,(F2=ITEM)*(G2=PTC),0)) to pull out the last price. This works because the last price is on top based on sorting. What I need is a formula that pulls out the next oldest price for that item/ptc combo. I tried using the SMALL function to no success.
I would like to extract Bill cost from "rule" sheet and insert it to "data" sheet using index-match functions. My problem are multiple criteria and multiple matches.
The criteria are Column: Cost type, Power, Penalty Category (The logic goes like AND function).
And I want it to extract "Bills" value from "rule" sheet.
There are multiple matches in all columns (Cost type, Power, Penalty Category) which cause wrong extraction.
How do i solve this problem with index-match function?
I am trying to return a reference to the first cell that meets several conditions. I can calculate a column (say Col E) that tells if each row meets condition with
=IF(AND(IF('number of cases by year'!B28:B547>'cumulative distribution >0 '!F51,TRUE,FALSE),IF('number of cases by year'!$A$2:$A$521>=DATE('% of cases captured'!$C$3,'% of cases captured'!$A$3,'% of cases captured'!$B$3),TRUE,FALSE)),TRUE,FALSE)
Then to find the first time this is met I use
=MATCH(TRUE,INDEX(E2:E521,0),0)
Is there a way to do this all in one step? I tried
=MATCH(TRUE,INDEX(IF(AND(IF('number of cases by year'!B20:B539>'cumulative distribution >0 '!F43,TRUE,FALSE),IF('number of cases by year'!$A$2:$A$521>=DATE('% of cases captured'!$C$3,'% of cases captured'!$A$3,'% of cases captured'!$B$3),TRUE,FALSE)),TRUE,FALSE),0),0)
I am making a table that reads from an list of employees. I have attached a sample sheet (changed the names). The list includes Name, 2014 Start Date, Pay Type, Job Title, Location, Weeks, Hours, Avg. Hours.
I need a formula that will list employees on a separate sheet based on the following criteria:
2014 Start Date = 1/1/2014 Avg. Hours >=30
I have worked with a number of INDEX MATCH combinations but I cannot get the formula to quit at 30 Avg. Hours whenever I drag the formula down. I also have seen some employees that average over 30 hours get "skipped" over whenever I drag the formula down.
I am trying to create a formula to pull in the mgmt fee% into the investor capital forecast tab, based on two vaiables. The client's AUM(column B), and their Tier (column A). It should pull in 1.157% from the Mgmt fee schedule tab, based on AUM of 314MM, and Tier 3.
I am trying to do an index match with multiple criteria and it keeps on returning a 'False' value. I am also not sure if it is adjusting the indexmatch lookup values for each row.
Code: Sub Check() Set ws1 = ActiveWorkbook.Sheets("SprocketPartData") Sheets("SprocketPartData").Activate Set ra = ws1.Range(Cells(2, 4), Cells(65536, 4).End(xlUp)) Dim c As Range
I have 2 workbooks and would like to use an index match formula to populate the data in the second workbook. I wanted to populate TOTAL HOURS in workbook 2 by matching "Month To Date" and "Employee ID" from Workbook 1.
Workbook 1
A B C D E F
1
Supervisor First Name Last Name Employee ID Total Hours
I need to write a formula using Index Match that is looking at to criteria field. I've done this formula before with one criteria field but now I need 2 and the way I'm writing it isn't working.
Where my variables would be based on whether a person is under EnglishSS1 and getting a score of <=10, the resulting rating would be 3. I know this is doable by doing a vlookup with a range lookup value of false. However I have roughly 70 column headers and it will be a bit taxing to combine an If and Vlookup statement to address it.
I have attached a sample sheet for reference : Book1.xlsx‎
We're selling language courses that have a different price depending on when a course is taken. We're trying to build a price quote application that needs to look up a certain school and course and price driven by a start date.
How can I build a lookup function that says: pick the price of school X and course Y when the start date falls between dd/mm/yyyy and dd/mm/yyyy?
I manage to build a look up function with MATCH and INDEX when the condition of start date is exactly matched but dont know how to instruct it to match a value between a start and end date.
I have a spreadsheet schedule that pulls quantities from another spreadsheet's cells. if the part number of the reference row matches the schedule cell's part number (row), and the date of the reference cell row is 2 workdays after that of the schedule cell's column, the quantity is put in the right place in the schedule. that part works. the problem I have is that sometimes there is more than one quantity with the same part number and date (due to the parts belonging to different jobs). when this is the case, only one of the quantities is picked up by the schedule. i want the schedule cells to sum the quantities of the reference file with matching criteria. i also don't want to have to change the reference file at all in order to do this. below is the function that works (besides summing the duplicates). the part after the " " is what i would need to alter.
HXS is the reference file where D is the part number column, I is the date column, and 5 is the index column referencing the quantity.
C is the part number column in the schedule K is the date row in the schedule ....
Now, I would like to add the ability to perform this same action/concept, but using two different criteria.
So I want to keep the hierarchical listing of importance, but lookup/match within using more than one criteria.
Example: I have an order of superseding to apply to results of a search for Fruit. Great Good Fair Poor (so Good supersedes, Great; Fair supersedes, Good; etc.)
I am trying to get my INDEX & MATCH formula to retreive data from my table.
This is what I can do so far: Jan-07Feb-07 100 12 250 45
=INDEX(table,MATCH(B13,balance),MATCH(C13, date))
But I am trying to get it to get another row to look up as well. I want it to look up the color then the 100 or 250, then the date. Jan-07Feb-07 red100 12 red250 45 blue100 78 blue250 1011
=INDEX(table,MATCH(B13,balance),MATCH(C13,date)) I think i need to insert another match code in the row section but cant seem to get it to work.
I am trying to create a list of all instances where contents in A3 is found in C5:C12 and return the values in D5:D12 without any spaces. Right now I can do it in two steps but I'd like to clean it up and do it with only one formula.
I'm having trouble using wildcards for text in index/match multiple criteria; I need to find the nearest site along a river (x) below a certain point (distance =21), each stretch of the river is labelled with the streches downstream (so stretch abc is upstream of ab).
My problem arises when the nearest point downstream is on the downtsream stretch of river. How do I use wild card to search for ab&"*" that will exclude abd.
River Distance Stretch
S1 x 10 a
[Code] ..........
'formula in cell E14 ={INDEX(A2:C11,MATCH(1,(A14=B2:B11)*(C2:C11
