The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1 Price 2 Price 3FruitDeliciousPearStore 1 Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A B C D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
i have this code which inserts blank rows in alternate rows,
Code: Sub insertrow() ' insertrow Macro Application.ScreenUpdating = True Dim count As Integer Dim X As Integer For count = 1 To 20 If activecell.Value "" Then activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
as per the attached, need to insert those grey rows subject to the following condition :
if current row date <> next row date, .and. current row latitude / longitude <> next row latitude / longitude , insert grey row with date = current row date, else insert grey row next row date
note that the coordinates in the repeated grey rows, for the "Home" location, are the same through the sheet, should be entered by the user, at the beginning of the process, since there will be a spreasheet per user.
date is in column K latitude / longitude are in columns B / C
this will be of tremendous assistance in automating mileage claim review.
I need to set up something that "calculates" an orders next delivery date. We deliver on Tuesdays, Wednesdays, and Thursdays for different stores. IE.
Store 1 - Today's Date-Wednesday 10/28/09 = Next delivery date is Tuesday 11/3/09. Store 2 - Today's Date-Wednesday 10/28/09 = Next delivery date is Wednesday 11/4/09. Store 3 - Today's Date-Wednesday 10/28/09 = Next delivery date is Thursday 10/29/09.
looking for for some help on a fairly simple problem: i've attached a worksheet, and in column B (Due to Supply Chain) i'd like to insert a formula that will subtract 21 days from the date in column Z (Pub Date), and then round that date to the nearest wednesday. is this possible?
fyi: the dates in column Z are in a yyyy-mm-dd format; they don't have to remain that way.
I'm trying to do an IF function involving the date. Basically if the current day is a weekday then I want the cell value to be 30. If the current date is a weekend then I want the cell value to be 50. I'm pretty lost on how to write the formula.
Im working on a spreadsheet which has a column of dates formatted in "dd/mm/yy" there are always 365 days listed but these could be between any period. I am trying to create a table which looks up all mondays, tuesdays etc ....
I need a formula to find the first monday in the list and then to fill the rest of the tables. So far I manually input the monday and the rows below use =previous row + 7 to fill the following mondays, then in the next section it will refer to the monday and +1 to populate tuesday then the +7 in the rows below.
Ideally i would like a system which would log these dates automatically, the trouble is, sometimes the Thursday or another day will be first ( eg if the raw data is between 01/01/09 - 30/12/09 then the 01/01/09 is a thursday so the first thursday is 01 but the first monday will be 04/01/09.
I'm trying to account for the date and have it change if the original falls on a weekend. I wrote it using the Weekday function, which I believe is a worksheet function and not a VBA one, as I keep getting a run-time error 5 (invalid procedure, call, or argument). Either that or I have something programmed wrong in it.
I have a running schedule with mutlile tasks scheduled for different day # or the same and would like to have the dates auto fill in once I enter the start date.
example: 4/20/06 task 1 day 1 ? task 2 day 2 ? task 3 day 2 ? task 4 day 3
Keeping in mind that I don't want to include weekends and that I'll need to delete a range of holiday dates.
Is there a way to have a sort of programmed button that could be pressed that would insert all of the rows at once? Or perhaps a new line could be generated for each table with the only missing data being the values that would have to input manually?
To make it more clear I have attached a sample table. In the sample table, what I would want to do is insert a row at row 47 and at row 93. I want to do these at the same time easily. Keeping in mind that there are 40 some other tables arranged in series like that in one single spreadsheet. I cannot simply hit ctrl and select the two rows and then insert both rows, this would be equally as time consuming to do for all of the rows that would have to be added. Also, in the attached table, most of the values are either calculated values or are hard set numbers. The manually inputted values occur in columns B, E, and F. Everything else is copied down from the previous line.
I had fix my rows is from 1 to 100,and each ten rows consists as one row and I had use border to separate each ten rows.(Eg,row 1 to 10 is 1row).....So when I click a button and I choose to add 10rows after row 20,how can I do so? because when i choose to add 10rows after row 20,the existing row start from 21 will move down....But the problem is I had fix my rows to 100 only...How can I do so that the row 21 will move down and at the same time check the total of rows will not exceed 100?
I need to insert 2 blank rows within a spreadsheet above certain other rows that contains data that starts with a particular text string.
Details: Column A has office codes in the form of "0301A", "0301B", etc. Column F will have billing codes that could start with either "L" or "ND" or "NF".
Problem: I want to separate the L's from the ND's and also the NF's in column F based on which office they are billed to.
End result: What I want to end up with are two blank rows in between each office code in column A, then another two blank rows between the L's, ND's and NF's.
I have a sheet that contains a number of documents entered into a system by a user. Each month those number of documents are average by the number of working days in a month.
I'm using this formula, =AVERAGE(C4,22)
I would have to edit this for each month with the number of working days.
Is there a way I can have this formula automatically find the number of working days in a month specificed and average it out?
I have a list of dates in Column A, with a list of associated values in Column B. I'd like to create a small summary table that will give a count of the dates in Column A and a sum of the values in Column B, broken into a bucket for each day of the week.
I know how to create this table using a short macro that would loop through the list of dates, but if possible I'd like to calculate the values using worksheet formulas so that I don't have to run the macro each time another set of data is added to the list.
